TY - JOUR T1 - Modeling of Electro Fenton Process for Removal of Diazinon from Groundwater Using Response Surface Methodology TT - مدل‌سازی فرایند الکتروفنتون در حذف دیازینون از آب‌های زیرزمینی با استفاده از روش سطح پاسخ JF - jehe JO - jehe VL - 5 IS - 2 UR - http://jehe.abzums.ac.ir/article-1-471-en.html Y1 - 2018 SP - 99 EP - 112 KW - Diazinon KW - Electro Fenton KW - Removal KW - Response surface methodology KW - Groundwater. N2 - Background: Diazinon is one of the most important pesticides extremely used in agriculture. Since these compounds are resistant to biodegradation, the arrival of these compounds to water resources has become a serious environmental problem. Therefore, in the current work, the removal of diazinon from groundwater was investigated using advanced oxidation processes electro Fenton. Methods: the current work was conducted in lab scale. The effect of operating parameters such as initial concentration of diazinon (1-30 mg.L-1), pH solution(3-9), current density (1-10 mA.cm-2), reaction time (3-30 min), and dosage of H2O2 (20-100 µL.L-1) were investigated. Response surface methodology (RSM) was used to optimize the parameters and suggested model was analyzed using ANOVA. Results: On the optimum condition including initial diazinon concentration of 6.88 mg.L-1, pH solution of 3, the reaction time of 10 min, the current density of 8.18 mA.cm-2, and dosage H2O2 of 83.78 µL.L-1 removal efficiency of diazinon was found to be 98.5 %. Electrical energy consumption (EEC) was found to be 0.524 kWh.m-3. Moreover, the concentration of diazinon in groundwater was found to be 0.934±0.053 µg.L-1. Conclusion: According to the obtained results, electro Fenton process was found to be an efficient technique for successful removal of diazinon and other resistant ungradable organic compound from water sources. M3 10.29252/jehe.5.2.99 ER -