@article{ 
author = {Seidi, Shahram and Azizi, Maryam},  
title = {Magnetic Graphene Oxide Modified with Sulfur for Selective Removal of Mercury from Water and Wastewater Samples followed by FI-CV-AAS}, 
abstract ={Background: The swift pace of industrial development and the widespread introduction of mercury as a toxic heavy metal made the identification and removal of this pollutant, particularly from water resources, critically important. This study focuses on the development of a magnetic nanosorbent composed of graphene oxide and sulfur-containing functional groups, designed to enhance both the adsorption selectivity and removal efficiency of mercury. Methods: S@MGO adsorbent was prepared for the removal of mercury from both water and wastewater samples. Mercury concentrations were determined using cold vapor atomic absorption spectrometry. The adsorbent w:as char:acterized using SEM, EDX, and FT-IR. An experimental design approach was employed to optimize parameters influencing mercury removal. The study investigated adsorption isotherms, adsorption capacity, stability and reusability, the effect of interfering ions, and mercury removal efficiency in various water and wastewater samples. Results: The optimal adsorption parameters for the prepared adsorbent were determined to be a solution pH of 6.8, an adsorption time of 29 minutes, and an adsorbent dosage of 53.0 mg. Adsorption isotherm data exhibited a strong correlation with the Langmuir model (R&#178; = 0.9998). The adsorbent demonstrated a high adsorption capacity of 401 mg/g, closely approaching the maximum capacity predicted by the Langmuir model (476.19 mg/g). Furthermore, surface modification with sulfur groups enhanced the adsorbent&#8217;s selectivity for mercury ions in the presence of competing cations. The S@MGO adsorbent exhibited good stability and reusability, maintaining a removal efficiency exceding 90% after 10 adsorption-desorption cycles. Finally, the mercury removal efficiency in various water samples exceeded 99%, with RSDs% below 4.1%. Conclusion: The magnetic properties of the S@MGO adsorbent facilitate its rapid collection following the removal process. Surface modification with sulfur-containing functional groups enhances its selectivity for mercury over other metal ions in aqueous solutions. The synthesized adsorbent offers several advantages, including high adsorption capacity, high removal efficiency, and a short removal time, making it a promising material for mercury remediation.},  
Keywords = {Magnetic adsorbent, Graphene oxide, Adsorption method, Mercury, Wastewater},
volume = {13},
Number = {1}, 
pages = {1-19}, 
publisher = {Alborz University of Medical Sciences},
title_fa = {گرافن اکساید مغناطیسی اصلاح شده با گوگرد  به منظور حذف گزینش‌پذیر جیوه از نمونه‌های آب و پساب و اندازه‌گیری به روش FI-CV-AAS},
abstract_fa ={زمینه و هدف: با توجه به توسعه سریع صنعتی و ورود جیوه به عنوان یک فلز با سمیت بالا، شناسایی و حذف این آلاینده، به ویژه در منابع آبی، اهمیت زیادی دارد. این مطالعه به تهیه یک نانوجاذب مغناطیسی مبتنی بر گرافن اکساید و گروه&#8204;های عاملی گوگرد دار می&#8204;پردازد تا گزینش&#8204;پذیری جذب و کارایی حذف جیوه را افزایش دهد. مواد و روش&#8204;ها: جاذب S@MGO برای حذف جیوه در نمونه&#8204;های آب و پساب تهیه شد. به منظور اندازه&#8204;گیری جیوه از دستگاه طیف&#8204;سنجی جذب اتمی بخار سرد استفاده شد. مشخصه&#8204;یابی جاذب با استفاده از SEM، EDX، و FT-IR انجام شد. بهینه&#8204;سازی پارامترهای موثر بر حذف جیوه با استفاده از طراحی آزمایش انجام شد. همدماهای جذب، ظرفیت جذب، پایداری و قابلیت استفاده مجدد، اثر یون&#8204;های مزاحم و کارایی حذف جیوه در نمونه&#8204;های آب و پساب مورد بررسی قرار گرفتند. یافته&#8204;ها: مقادیر بهینه پارامترهای جذب برای جاذب تهیه شده شامل pH محلول ۶/۸، زمان جذب ۲۹ دقیقه و مقدار جاذب mg ۵۳/۰ تعیین شد. نتایج همدماهای جذب نشان دادند که انطباق بهتری با مدل لانگمویر دارند (۰/۹۹۹۸ = R&#178;). این جاذب ظرفیت جذب بالایی معادل mg/g ۴۰۱/۰ دارد که نزدیک به بیشینه محاسبه&#8204;شده با مدل لانگمویر (mg/g ۴۷۶/۱۹) است. همچنین، اصلاح سطح با گروه&#8204;های گوگرد دار باعث افزایش گزینش&#8204;پذیری برای یون جیوه در حضور سایر کاتیون&#8204;ها شده است. جاذب از پایداری و قابلیت استفاده مجدد خوبی برخوردار است و کارایی حذف بالای ۹۰٪ را پس از ۱۰&#160;مرحله جذب و واجذب حفظ می&#8204;کند. در نهایت، کارایی حذف جیوه در نمونه&#8204;های آب و پساب مختلف بیش از ۹۹٪ با RSD% کمتر از ۴/۱٪ حاصل شد. نتیجه&#8204;گیری: خاصیت مغناطیسی جاذب، امکان جمع&#8204;آوری سریع آن را پس از انجام فرایند حذف میسر می&#8204;سازد. به دلیل اصلاح سطح جاذب با گروه&#8204;های عاملی گوگرد دار، انتخاب&#8204;پذیری آن برای جیوه نسبت به یون&#8204;های فلزی دیگر در محیط&#8204;های آبی افزایش یافت. ظرفیت جذب بالا، راندمان حذف بالا و زمان حذف کوتاه از دیگر مزایای جاذب سنتز شده است.},
keywords_fa = {جاذب مغناطیسی, گرافن اکساید, روش جذبی, جیوه, پساب},

doi = {10.61882/jehe.13.1.1},
url = {http://jehe.abzums.ac.ir/article-1-1099-en.html},  
eprint = {http://jehe.abzums.ac.ir/article-1-1099-en.pdf},  
journal = {Journal of Environmental Health Engineering},  
issn = {2383-3211}, 
eissn = {2588-4239}, 
year = {2025}  
}

@article{ 
author = {Solgi, Eisa and Abbasitabar, Hamid and Fazlali, Zinat},  
title = {Investigation and risk assessment of heavy metals in walnuts produced in Toyserkan County, Hamedan, Iran}, 
abstract ={Background: Walnut is the most widely distributed tree nut worldwide and has been consumed as a nutrient-rich food for many years. The aim of this study was to investigate the concentration and risk assessment of heavy metals in walnuts produced in Toyserkan County, Hamedan Province. Materials and Methods: 45 walnut samples were collected from 3 cities and 15 villages of Toyserkan county by systematic-random method. After preparation and digestion of the samples by acid method, the concentration of heavy metals was measured by atomic absorption spectrometry. EDI, HQ and HI indices were used for risk assessment. Results: The average concentrations of heavy metals Cu, Zn, Fe, Mn, Na and K were 16.12, 47.43, 88.53, 44.25, 280.9, and 182.6 mg/kg, respectively. The results of the Kruskal-Wallis and Mann-Whitney tests showed that the difference between the mean concentrations of iron, manganese, sodium, and potassium was significant with the change in location. Spearman correlation test also showed that there is a significant correlation between heavy metals and mineral elements. The EDI and HQ index for each of the studied heavy metals and the HI index for the total of heavy metals in both age groups were less than 1 and within the permissible limit. Conclusion: The average concentration of copper and manganese was higher and zinc was lower than the amount recommended by FAO and World Health Organization. Compared to other different countries in the world, the concentration of iron, zinc, manganese and sodium was higher and potassium was lower. The heavy metals studied were considered to be non-carcinogenic for both adults and children and did not pose a significant risk of adverse health effects. Special attention to the contamination of soil and agricultural products, especially walnuts, with heavy metals and the control and reduction of the entry of these pollutants through human sources such as chemical fertilizers and pesticides in Toyserkan County is necessary.},  
Keywords = {Walnut, Heavy Metals, Risk Assessment, Toysercan},
volume = {13},
Number = {1}, 
pages = {20-35}, 
publisher = {Alborz University of Medical Sciences},
title_fa = {بررسی و ارزیابی ریسک فلزات سنگین در گردوی تولید شده در شهرستان تویسرکان},
abstract_fa ={زمینه و هدف : گردو پر توزیع&#8204;ترین آجیل درختی در سراسر جهان است و سال&#8204;هاست که به عنوان یک غذای غنی از مواد مغذی مصرف می&#8204;شود. هدف از این پژوهش بررسی غلظت و ارزیابی&#173; ریسک فلزات&#173; سنگین در گردوی تولید شده در شهرستان تویسرکان در استان همدان بود. مواد و روش&#173;&#8204;ها : ۴۵ نمونه گردو از ۳ شهر و ۱۵ روستای شهرستان تویسرکان به روش سیستماتیک&#173;-&#173;تصادفی جمع&#173;آوری گردید. پس از آماده&#8204;&#173;سازی و هضم نمونه&#173; ها به روش اسیدی، غلطت فلزات&#173;سنگین توسط دستگاه جذب اتمی اندازه&#173; گیری شد. جهت ارزیابی &#173;ریسک از شاخص&#8204;های EDI، HQ و HI &#160;استفاده شد. یافته&#8204;&#173;ها: میانگین غلظت فلزات&#173; سنگین مس، روی، آهن، منگنز به ترتیب برابر با ۱۶/۱۲، ۴۷/۴۳، ۸۸/۵۳ ، ۴۴/۲۵ و سدیم و پتاسیم ۲۸۰/۹ و ۱۸۲/۶ میلی&#173; گرم بر کیلوگرم بود. نتایج آزمون کروسکال&#173;-&#173;والیس و من&#173;-&#173;ویتنی نشان داد که اختلاف بین میانگین غلظت آهن، منگنز، سدیم و پتاسیم با تغییر مکان معنی &#173;دار بود. آزمون همبستگی اسپیرمن نیز نشان داد که همبستگی معنی&#173;دار بین فلزات&#173; سنگین و عناصر معدنی وجود دارد. شاخص EDI و HQ برای هر یک از فلزات&#173; سنگین مورد مطالعه و&#160; شاخص HI برای مجموع فلزات&#173; سنگین برای هر دو رده سنی، کمتر از ۱ و در حد مجاز بود. &#173;نتیجه&#173;&#8204;گیری: میانگین غلظت مس و منگنز بالاتر و روی و آهن کمتر از مقدار توصیه شده توسط فائو و سازمان بهداشت جهانی بود. در مقایسه با کشورهای مختلف جهان، غلظت آهن، روی، منگنز و سدیم بالاتر و پتاسیم پایین تر بود. فلزات سنگین مورد بررسی بدون ریسک اثرات غیرسرطان زایی برای دو رده سنی بزرگسال و کودکان بودند و خطر قابل ملاحظه&#8204;ای برای اثرات نامطلوب سلامتی نداشتند. توجه ویژه به آلودگی خاک و محصولات کشاورزی به ویژه آلودگی گردو به فلزات سنگین و کنترل و کاهش ورود این آلاینده&#173;ها از طریق منابع انسانی مانند کود شیمیایی و آفت&#173;کش در شهرستان تویسرکان ضروری است.},
keywords_fa = {گردو, فلزات سنگین, ارزیابی ریسک, تویسرکان},

doi = {10.61882/jehe.13.1.20},
url = {http://jehe.abzums.ac.ir/article-1-1090-en.html},  
eprint = {http://jehe.abzums.ac.ir/article-1-1090-en.pdf},  
journal = {Journal of Environmental Health Engineering},  
issn = {2383-3211}, 
eissn = {2588-4239}, 
year = {2025}  
}

@article{ 
author = {Aqanaghad, Mohammad and Saifloo, Mohammad Ami},  
title = {Investigation and audit of the safety, health and environmental aspects of the swimming pools in Khoy City since 2022-2024}, 
abstract ={Background: Swimming pools, despite supervision by health centers, can be sources of the transmission of infectious diseases due to non-expert pool operators. This research aimed to evaluate the HSE of swimming pools in Khoy City from 2022 to 2024. Materials and Methods: We conducted this practical study on seven swimming pools in Khoy. We performed HSE assessments based on checklists and water test results from the Health Deputy of the Khoy Medical Sciences Faculty. Data were analyzed using SPSS software, due to the non-parametric nature of the data, Wilcoxon and Spearman tests were used for comparing the parameters with relevant standards. Results: The average score of compliance of HSE parameters with relevant national health standards was 86%. Kabiry pool and mineral hot water pools had the highest and lowest compliance with the standards, respectively. Fecal coliform was absent in all pools except the mineral hot water ones. The average heterotrophic plate count was below 200 in all pools except in mineral water pools, where it exceeded 200. Microbial water quality scores ranged from 40 to 95. The average amount of free chlorine met the standard and showed a significant inverse relationship with the numbers of coliforms and HPC. Conclusion: Due to inadequate regular purification, the water turbidity of the swimming pools exceeded the standard. Consequently, the water microbial quality was not favorable despite sufficient residual chlorine levels. This indicates that the pool attendants focused on chlorination and neglected water quality. So, we recommend that the pool staff receive proper training in pool operation.},  
Keywords = {Khoy city, swimming pools, Health and safety, Water quality},
volume = {13},
Number = {1}, 
pages = {36-49}, 
publisher = {Alborz University of Medical Sciences},
title_fa = {بررسی و ممیزی وضعیت ایمنی، بهداشت و جنبه های زیست محیطی استخرهای شهر خوی  از سال 1401 تا 1403},
abstract_fa ={زمینه و هدف: معمولا به دلیل غیرکارشناس بودن متصدیان استخرهای شنا، استخرها ریسک بالایی برای انتقال برخی بیماری&#8204;های واگیردار دارند لذا مطالعه و بهبود وضعیت بهداشت، ایمنی و زیست&#173; محیطی استخرها ضروری است. بنابراین این تحقیق به بررسی جامع استخرهای شهر خوی از این نظر &#8204;طی سالهای ۱۴۰۱ تا ۱۴۰۳ پرداخت. مواد و روش&#8204;&#173;ها: این مطالعه کاربردی روی هفت استخر فعال درشهرستان خوی انجام گرفت. برای ارزیابی بهداشتی و ایمنی استخرها از چک&#173;لیست های پرشده و نتایج آزمایشات آب که توسط دانشکده علوم پزشکی خوی انجام شده بود، استفاده گردید. پارامترهای توصیفی بین ۰ تا ۱۰۰ نمره&#8204;&#173;دهی گردید. داده&#173;&#8204;ها توسط نرم&#173;افزار SPSS جمع&#8204;&#173;آوری و تحلیل آماری گردید. به دلیل غیرنرمال بودن توزیع داده&#8204;&#173;ها از آزمون های غیرپارامتریک ویلکاکسون و اسپیرمن برای مقایسه با استانداردها و همبستگی پارامترها استفاده شد. یافته&#8204;&#173;ها: نمره میانگین مطابقت پارامترهای بهداشتی و ایمنی با استانداردهای مرتبط کشوری ۸۶ درصد بود. از نظر میانگین نمرات، استخر کبیری بالاترین تطابق با موازین بهداشتی و استخرهای آب&#173;گرم کمترین تطابق را داشتند. میانگین تعداد کلیفرم گوارشی در همه آنها غیر از آب گرم&#173;&#8204;ها صفر بود. میانگین تعداد HPC در همه استخرها زیر ۲۰۰ و در آب گرم&#8204;&#173;ها بالاتر از 200 بود. از نظر کیفیت میکروبی آب، میانگین نمرات ۴۰ تا ۹۵ بود. مقدار کلر آزاد به طورمیانگین، برابر استاندارد بود و مقدار کلر آزاد با تعداد کلیفرم و HPC ارتباط معکوس معنی &#173;دار داشت. نتیجه گیری: به دلیل عدم تصفیه منظم، کدورت آب استخرهای خوی بالاتراز استاندارد بود، به همین خاطر کیفیت میکروبی آب با وجود کلر باقیمانده کافی، مطلوب نبود. مشخص شد متصدیان استخر فقط روی کلرزنی تمرکز کرده و از کیفیت آب غافل هستند لذا آموزش اصولی کارکنان و نظارت بیشتردر زمینه راهبری استخر پیشنهاد می&#8204;شود},
keywords_fa = {شهر خوی, استخرهای شنا, بهداشت و ایمنی, کیفیت آب},

doi = {10.61882/jehe.13.1.36},
url = {http://jehe.abzums.ac.ir/article-1-1089-en.html},  
eprint = {http://jehe.abzums.ac.ir/article-1-1089-en.pdf},  
journal = {Journal of Environmental Health Engineering},  
issn = {2383-3211}, 
eissn = {2588-4239}, 
year = {2025}  
}

@article{ 
author = {Damroudi, Alireza and Rostaei, Esmail and Mengelizadeh, Nezamaddin and Moradnia, Maryam},  
title = {Evaluation of the Efficiency of Bentonite@Fe3O4 Composite in Activating Peroxymonosulfate for the Degradation of Acid Blue 113 Dye from Aqueous Solutions}, 
abstract ={Background: The presence of synthetic dyes that are toxic and non-biodegradable, in receiving waters leads to reduced dissolved oxygen, water turbidity, and decreased photosynthesis in aquatic plants. Therefore, the aim of this study was to degrade acid blue 113 (AB113) dye through the generation of reactive radicals by activating peroxymonosulfate (PMS) using a Bentonite@Fe3O4 catalyst. Materials and Methods: In this study, the Bentonite@Fe3O4 catalyst was synthesized using a hydrothermal-chemical method and characterized through diagnostic analyses. In the catalytic process, the effects of various parameters such as pH (3&#8211;11), catalyst dosage (0&#8211;400 mg/L), PMS concentration (0&#8211;1 mM), and reaction time (0&#8211;120 min) were investigated. The identification of reactive radicals and the toxicity test of the treated solution were also conducted. Results: Successful synthesis of the Bentonite@Fe3O4 catalyst was confirmed by SEM, XRD, and FTIR analyses. Complete dye removal was achieved under the following operational conditions: pH 3, catalyst dosage of 200 mg/L, PMS concentration of 0.5 mM, and a reaction time of 100 min. Sulfate radicals (SO4&#8226;⁻), hydroxyl radicals (&#8226;OH), and superoxide radicals (O2&#8226;⁻) were identified as the active species in the dye degradation process. A 1.56-fold increase in the growth of mint plants in the treated solution compared to the untreated one emphasized the effective toxicity reduction achieved by the current process. Conclusion: The findings of the study demonstrated that catalytic treatment of the AB113 solution could produce an effluent suitable for safe disposal.},  
Keywords = {Catalytic process, Bentonite@Fe3O4, toxicity, radical identification, catalyst synthesis},
volume = {13},
Number = {1}, 
pages = {50-64}, 
publisher = {Alborz University of Medical Sciences},
title_fa = {بررسی کارایی کامپوزیت بنتونیت@Fe3O4 در فعال سازی پراکسی مونوسولفات در تجزیه رنگ اسید بلو 113 از محلول های آبی},
abstract_fa ={زمینه و هدف: حضور رنگ های سنتتیک به عنوان مواد غیرقابل تجزیه و سمی در آب های پذیرنده منجر به کاهش اکسیژن محلول، کدری آب و کاهش فتوسنتز گیاهان آبزی می گردد. از اینرو، هدف از این مطالعه تجزیه رنگ اسید بلو ۱۱۳ (AB113) از طریق تولید رادیکال های واکنش پذیر بوسیله فعال سازی پراکسی مونوسولفات (PMS) با کاتالیست بنتوینت@Fe3O4 بود.&#160; &#160; مواد و روش ها: در این پژوهش، کاتالیست بنتونیت@ Fe3O4از طریق روش گرمایی- شیمیایی تهیه شد و ویژگی های آن از طریق آنالیزهای تشخیصی مشخص گردید. در فرآیند کاتالیتیک تاثیر پارامترهای مختلف همچون pH (۳-۱۱)، مقدار کاتالیست (۰-۴۰۰ میلی گرم بر لیتر)، مقدار PMS ( ۰-۱ میلی مولار) و زمان (۰-۱۲۰ دقیقه) مورد بررسی قرار گرفت. آزمایش شناسایی رادیکال های فعال و همچنین آزمون سمیت محلول تصفیه شده مورد امتحان قرار گرفت. یافته ها: سنتز موفقیت آمیز کاتالیست بنتونیت@ Fe3O4 از طریق آنالیزهای SEM، XRD و FTIR تایید شد. حذف کامل رنگ در یک شرایط اپراتوری شامل pH ۳، مقدار mg/L ۲۰۰ کاتالیست، مقدار ۰/۵ میلی مولار PMS و زمان واکنش ۱۰۰ دقیقه بدست آمد. رادیکال های سولفات (SO4&#8226;-)، هیدروکسیل (&#8226;OH) و سوپراکسید (O2&#8226;-) به عنوان گونه های فعال در تجزیه رنگ از محیط آبی شناسایی شدند. رشد ۱/۵۶ برابری گیاه نعناع در محلول تصفیه شده در مقابل محلول تصفیه نشده تاکید کرد که فرآیند حاضر کارایی مناسبی در کاهش سمیت محلول دارد. &#160; نتیجه گیری: یافته های مطالعه نشان داد که با تصفیه کاتالیتیک محلول 113AB، میتوان پسابی مناسبی برای دفع بدست آورد.},
keywords_fa = {فرآیند کاتالیتیک, بنتونیت@Fe3O4, سمیت, شناسایی رادیکال ها, سنتز کاتالیست},

doi = {10.61882/jehe.13.1.50},
url = {http://jehe.abzums.ac.ir/article-1-1113-en.html},  
eprint = {http://jehe.abzums.ac.ir/article-1-1113-en.pdf},  
journal = {Journal of Environmental Health Engineering},  
issn = {2383-3211}, 
eissn = {2588-4239}, 
year = {2025}  
}

@article{ 
author = {Safari, Gholam Hossain and BahramiValeh, Samira and Darvishmotevalli, Mohammad and Faraji, Hossein and Eskandari, Akbar},  
title = {Comprehensive investigation of plant phytoremediation mechanisms for the removal of various pollutants from soil}, 
abstract ={Background: From the global point of view, the soil is considered as the third major component of the environment, and its pollution is currently one of the most important challenges for environmental organizations worldwide, as well as the most significant environmental problems for countries. Therefore, the present study aims to comprehensively investigate the mechanisms of phytoremediation as an effective and sustainable tool for the purification of various pollutants from the soil. Materials and Methods: This study was a descriptive review conducted in 2024 to report the process of search, documentation, and screening of the PRISMA checklist for systematic reviews. The search method included articles from 2000 to 2023 using the English keywords Phytoremediation, bioremediation, soil contamination, Heavy metals in soil, and their corresponding Persian equivalents on reputable websites such as PubMed, Scopus, Web of Science, Google Scholar, Magiran, and SID. Results: After searching with relevant keywords, a total of 1021 studies were found, and based on the criteria of input and output, 50 articles were used. According to the results, the main pollutants in soil are heavy metals, BTEX pollutants, and petroleum substances, which can be effectively remediated through various phytoremediation mechanisms, including hydraulic control, phytodegradation, phytoextraction, phytostabilization, phytovolatilization, rhizosphere degradation, and rhizofiltration, as a novel technology for addressing these contaminations. Conclusion: The high costs of physical and chemical methods of soil remediation have led to the utilization of phytoremediation as a more cost-effective and simple approach for soil purification. The main advantage of this method over others is its affordability and simplicity, while its disadvantages include the potential accumulation of metals in bioaccumulating plants and the consumption of contaminated plant biomass by animals, limited climatic conditions, incomplete understanding of this technology, and its lengthy duration.},  
Keywords = {phytoremediation, soil pollution, heavy metals, bioremediation},
volume = {13},
Number = {1}, 
pages = {65-81}, 
publisher = {Alborz University of Medical Sciences},
title_fa = {بررسی جامع مکانیسم‌های گیاه‌پالایی برای حذف آلاینده های مختلف از خاک},
abstract_fa ={&#160;زمینه و هدف: از دیدگاه جهانی خاک سومین جزء عمده محیط زیست تلقی می&#8204;شود که آلودگی آن در حال حاضر از مهم&#8204;ترین چالش&#8204;های سازمان&#8204;های محیط زیست در جهان و همچنین مهم&#8204;ترین معضلات زیست&#8204;محیطی کشورها است لذا مطالعه حاضر باهدف بررسی جامع مکانیسم&#8204;های گیاه&#8204;پالایی به&#8204;عنوان یک ابزار کارآمد و پایدار برای پاک&#8204;سازی آلاینده&#173;&#8204;های مختلف از خاک انجام شد. مواد و روش&#8204;ها: این مطالعه، یک مطالعه مروری - توصیفی در سال ۲۰۲۴ بود که به&#8204;منظور گزارش فرایند جست&#8206;وجو، مستندسازی و غربالگری از چک&#8204;لیست پریزما برای بررسی&#8204;های سیستماتیک استفاده شد. روش کار با جست&#8204;وجو مقالات از سال ۲۰۰۰ تا ۲۰۲۳ با کلید&#8204; واژه&#8204;های انگلیسیPhytoremediation ،bioremediation ،soil contamination ،Heavy metals in soil و معادل فارسی مربوطه درسایت&#8204;های معتبر PubMed، Scopus،Web of Science ،Google Scholar ،Magiran و &#160;SIDبود. یافته&#8204;ها: بعد از جست&#8204;وجو با کلید واژه&#8204;های مرتبط تعداد ۱۰۲۱ مطالعه یافت شد و براساس معیارهای ورود و خروج ۵۰ مقاله مورد استفاده قرار گرفت. براساس نتایج آلاینده&#8204;&#173;های اصلی خاک فلزات سنگین، گروه آلاینده&#8204;های &#160;BTEXو مواد نفتی است و با مکانیسم&#173;های مختلف گیاهپالایی از جمله کنترل هیدرولیک، تجزیه توسط گیاهی، گیاه استخراجی، گیاه تثبیتی، تصعید توسط گیاه، تجزیه توسط ریزوسفر، ریزوفیلتراسیون به عنوان یک فناوری نوین در رفع این آلودگی&#173;&#8204;ها موثر واقع شوند. نتیجه&#8204;گیری: هزینه&#8204;های گزاف روش&#8204;های فیزیکی و شمیایی تصفیه خاک سبب شده تا استفاده از روش گیاه&#8204;&#173;پالایی برای پاکسازی و تصفیه خاک بکار گرفته شود بزرگ&#8204;ترین مزیت این روش نسبت به سایر روش&#8204;ها، ارزان بودن و سادگی آن و معایب این روش خطرناک بودن بیـومس گیاهان تجمع کننده فلزات و مصـرف بیــومس گیــاهی آلــوده شــده توسط حیوانات، فاکتور محدود کننده شرایط آب و هوایی، عدم درک کامل این تکنولوژی و طولانی بودن آن است. &#160;},
keywords_fa = {گیاه‌پالایی, آلودگی خاک, فلزات سنگین, زیست‌پالایی},

doi = {10.61882/jehe.13.1.65},
url = {http://jehe.abzums.ac.ir/article-1-1091-en.html},  
eprint = {http://jehe.abzums.ac.ir/article-1-1091-en.pdf},  
journal = {Journal of Environmental Health Engineering},  
issn = {2383-3211}, 
eissn = {2588-4239}, 
year = {2025}  
}

@article{ 
author = {Zarei, Fatemeh and Mousavifard, Seyedeh Azar and Noroozi, Roghayeh and Mousavikia, Seyedeh Fatemeh and Ahmadi, Sakineh and Ahadian, Farib},  
title = {Investigating the effect of oil terminal pollutants on the level of BTEX compounds contamination between the oil terminal and the Fardis grain depot}, 
abstract ={Background: The emission of gasoline vapour during the distribution, loading, evacuation, and transportation of petroleum products is a major cause of air pollution. Due to the closeness of the grain depot to the Fardis oil terminal. This study aimed to investigate the effect of pollutants emitted from the oil terminal on the level of BTEX compound contamination between the two storage sites. Materials and Methods: This cross-sectional-analytical study was conducted in 1400-1401. Monoaromatics were measured using a Focheck device made in Britain. The pollutants studied was benzene, toluene, xylene, and ethylbenzene. Data was collected for 125 samples over a period of one month. Measurements were taken between 9 - 10 a.m. Results: The oil depot&#39;s internal and external environments were measured, and there was a significant difference found (P&#60;0.05). Significantly higher concentrations were reported for the pollutants studied in the external environment of the oil depot.&#160;After comparing the external environment of the oil depot, it was observed that the level of benzene was 0.46 mg/m3, which is roughly 0.09 above the environmental standard limit. After benzene, xylene, toluene, and ethylbenzene were in lower concentration levels, respectively. Conclusion: According to the study, the concentration of aromatic hydrocarbons outside the oil depot was significantly higher than those inside. Hence, the grain depot was more affected by the presence of vehicles than the oil depot, as can be inferred.},  
Keywords = {Benzen, Aromatic hydrocarbons, BTEX, Oil storage},
volume = {13},
Number = {1}, 
pages = {82-90}, 
publisher = {Alborz University of Medical Sciences},
title_fa = {بررسی تاثیرآلاینده های انبار نفت بر میزان آلودگی ترکیبات BTEX در حد فاصل انبار نفت و انبار غله فردیس},
abstract_fa ={زمینه وهدف: انتشار بخار بنزین در ایستگاه&#173;های تولید وپخش فراورده&#173;های نفتی درحین توزیع، بارگیری، تخلیه و حمل و نقل یکی از منابع اصلی آلودگی هوا به حساب می&#8204;&#173;آید. با توجه به نزدیکی انبار غله به انبار نفت فردیس، این مطالعه با هدف بررسی تاثیر آلاینده های منتشر شده از انبار نفت بر میزان آلودگی ترکیبات BTEX در حد فاصل دو انبار شکل گرفت. مواد و روش ها: این مطالعه مقطعی&#8211; تحلیلی در سال ۱۴۰۰-۱۴۰۱ انجام گرفت. از دستگاه فوچک ساخت کشور انگلیس جهت سنجش منوآروماتیک&#8204;ها استفاده گردید. آلاینده&#173;&#8204;های مورد بررسی بنزن، تولوئن،زایلن و اتیل&#173;بنزن بود. داده&#8204;&#173;ها در یک ماه و به تعداد ۱۲۵ نمونه جمع&#8204;&#173;آوری شد. اندازه&#8204;گیری&#8204;ها در ساعات ۱۰-۹ صبح انجام شد. یافته ها: نتایج اندازه&#173;&#8204;گیری&#173;&#8204;ها در محیط داخلی و محیط خارجی انبار نفت نشان دهنده تفاوت معنی&#173;دار بین این دو محیط می باشد(۰/۰۵&#62;P). میانگین غلظت آلاینده&#173;های مورد بررسی در محیط خارجی انبار نفت به طور معنی&#173;داری بالاتر گزارش شد.&#160;مقایسه انجام شده در محیط خارجی انبار نفت نشان داد که میزان بنزن برابر با&#160;۰/۴۶ mg/m3&#160;&#160;بود که حدود ۰/۰۹ برابر حد استاندارد زیست محیطی می&#8204;&#173;باشد. پس از بنزن به ترتیب زایلن، تولوئن، اتیل بنزن در مرتبه&#8204;های پایین&#8204;تر غلظت قراردارند. نتیجه گیری: باتوجه به اینکه درمطالعه حاضر غلظت هیدورکربن&#173;&#8204;های آروماتیک در محیط خارجی انبار نفت به طور معنی&#173;&#8204;داری بیشتر از غلظت هیدروکربن&#173;&#8204;های داخل فضای انبار نفت می&#8204;&#173;باشد می&#173;&#8204;توان گفت حضور وسایل نقلیه بسیار بیشتر از وجود انبار نفت بر روی انبار غله تاثیرگذار است.},
keywords_fa = {بنزن, هیدورکربن های آروماتیک, BTEX, انبار نفت},

doi = {10.61882/jehe.13.1.82},
url = {http://jehe.abzums.ac.ir/article-1-1100-en.html},  
eprint = {http://jehe.abzums.ac.ir/article-1-1100-en.pdf},  
journal = {Journal of Environmental Health Engineering},  
issn = {2383-3211}, 
eissn = {2588-4239}, 
year = {2025}  
}

@article{ 
author = {Shakerkouhi, Sajjad and Rabiee, Mohamm},  
title = {Strategies for reducing arsenic accumulation in rice grains: A systematic review}, 
abstract ={Background: Arsenic (As) is one of the most toxic heavy metals posing a serious threat to human health by affecting the food chain. Compared to other cereals, rice has a high potential for As accumulation due to growth in flooded conditions. Therefore, it is essential to develop strategies for reducing As accumulation in rice grain. Accordingly, the present study was conducted with the aim of investigating the strategies for reducing As accumulation in rice grain. Materials and Methods: In the initial search of articles, a total of 164 articles published between 2004 and 2024, and were reduced after removing duplicates to 126 articles. Then, in the screening stage, the title and abstract of the articles were reviewed and at the end, 92 articles remained. The full text of the screened articles was studied and finally, 68 articles were used in this study. Results: The results showed that water management practices such as intermittent irrigation can help reduce As content of rice plants due to changing the redox status of the soil. In addition, As uptake and toxicity in rice can be reduced by the application of organic amendments (biochar and organic fertilizers) and inorganic amendments (iron, silicon and sulfur). Another way to reduce arsenic absorption by rice is the use of nanotechnology. Selection of low As accumulating rice cultivars and inoculation with microorganisms are among the other agronomic practices successfully employed for reducing As concentration in rice grains. Conclusion: The use of appropriate management practices can enhance rice tolerance to As stress and reduce entry into the food chain.},  
Keywords = {Arsenic, Biochar, Heavy metals, Rice, Water management},
volume = {13},
Number = {1}, 
pages = {91-107}, 
publisher = {Alborz University of Medical Sciences},
title_fa = {استراتژی‌های کاهش انباشت آرسنیک در دانه برنج: یک مطالعه مروری نظام‌مند},
abstract_fa ={زمینه و هدف: آرسنیک یکی از سمی&#8204;ترین فلزات سنگین است که با تأثیر بر زنجیره غذایی، می&#8204;تواند تهدیدی جدی برای سلامت انسان باشد. برنج به&#8204;دلیل رشد در شرایط غرقابی، در مقایسه با سایر غلات از ظرفیت قابل&#8204;توجهی برای تجمع آرسنیک برخوردار است. بنابراین، توسعه روش&#8204;هایی برای کاهش تجمع آرسنیک در دانه برنج امری ضروری است. بر این اساس، مطالعه حاضر با هدف بررسی راهکارهای کاهش تجمع آرسنیک در خاک و گیاه برنج انجام شد. مواد و روش&#8204;ها: در جستجوی اولیه مقالات، در مجموع 164 مقاله در بازه زمانی ۲۰۰۴ تا ۲۰۲۴ یافت شد و پس از حذف موارد تکراری، این تعداد به ۱۲۶&#160;رسید. سپس در مرحله غربالگری، عنوان و چکیده مقالات مورد بررسی قرار گرفت و در انتهای این مرحله تعداد ۹۲ مقاله باقی ماند. در نهایت پس از بررسی متن کامل مقالات، تعداد ۶۸ مقاله برای این مطالعه استفاده شد. یافته&#8204;ها: نتایج نشان داد که شیوه&#8204;های مدیریت آب از جمله آبیاری تناوبی به&#8204;دلیل تغییر وضعیت ردوکس خاک می&#8204;تواند به کاهش محتوای آرسنیک در برنج کمک نماید. علاوه بر این، سمیت و جذب آرسنیک در برنج را می&#8204;توان با استفاده از اصلاح&#8204;کننده&#8204;های ارگانیک (بیوچار و کودهای آلی) و اصلاح&#8204;کننده&#8204;های غیرارگانیک (آهن، سیلیکون و گوگرد) کاهش داد. استفاده از فناوری نانو، روش دیگری برای کاهش جذب آرسنیک توسط برنج است. انتخاب ارقام برنج کم انباشته کننده آرسنیک و کاربرد میکروارگانیسم&#8204;ها از دیگر اقدامات زراعی موفق برای کاهش غلظت آرسنیک در دانه برنج هستند. نتیجه&#8204;گیری: استفاده از شیوه&#8204;های مدیریتی مناسب می&#8204;تواند تحمل گیاه برنج به تنش آرسنیک را افزایش داده و انتقال آن به زنجیره غذایی را کاهش دهد.},
keywords_fa = {آرسنیک, برنج, بیوچار, فلزات سنگین, مدیریت آب},

doi = {10.61882/jehe.13.1.91},
url = {http://jehe.abzums.ac.ir/article-1-1103-en.html},  
eprint = {http://jehe.abzums.ac.ir/article-1-1103-en.pdf},  
journal = {Journal of Environmental Health Engineering},  
issn = {2383-3211}, 
eissn = {2588-4239}, 
year = {2025}  
}

@article{ 
author = {Ghiyasvand, Younes and Mahmoudian, Shokoufeh and Mazloomi, Sajad and Amarloei, Ali},  
title = {Investigation of the characteristics of swimming pool water in Ilam City regarding turbidity, residual chlorine, and microbial load}, 
abstract ={Background: Swimming is considered one of the most suitable and enjoyable sports and recreational activities for individuals of all ages, especially during the hot season. To prevent disease, attention must be paid to the hygiene of swimming pools. This study aimed to determine the characteristics of the water in swimming pools in the city of Ilam. Materials and Methods: In this descriptive cross-sectional study, samples were taken from 6 indoor public swimming pools in Ilam City through a census method. Parameters such as temperature, turbidity, pH, residual chlorine, and microbial quality were assessed for 3 months (from December to February). The findings were compared with Iran&#39;s national standard No. 9412 and the guidelines for monitoring and supervising swimming pool water and natural bathing places. Data analysis was conducted using Pearson&#39;s test and SPSS software version 16. Results: The results indicated that the lowest level of compliance with existing standards among the studied parameters was temperature, which did not meet standards in 83% of cases. The highest level of compliance was found in fecal coliform, with 94% compliance. Turbidity, pH, residual chlorine, total coliform, and fecal coliform matched the standards in 61%, 67%, 83%, 83%, and 94% of the samples, respectively. Conclusion: Based on the findings, it is recommended to ensure personal hygiene, take showers before swimming, timely change filtration systems, adjust the water retention time concerning the number and hygiene of swimmers for turbidity control, and use thermal sensors and automatic controls for temperature regulation.},  
Keywords = {Swimming pools, Microbial quality, City of Ilam},
volume = {13},
Number = {1}, 
pages = {108-117}, 
publisher = {Alborz University of Medical Sciences},
title_fa = {بررسی ویژگی های آب استخرهای شنا شهر ایلام از نقطه نظر کدورت، کلر باقی مانده و بار میکروبی},
abstract_fa ={زمینه و هدف: شنا یکی از ورزش&#8204;ها و سرگرمی های بسیار مناسب و لذت&#8204; بخش برای کلیه&#8204;ی افراد در سنین مختلف، به ویژه در فصل گرما محسوب می&#8204;شود. به منظور جلوگیری از بیماری باید به بهداشت استخرهای شنا توجه کرد. هدف از این مطالعه تعیین ویژگی های آب استخرهای شنا شهر ایلام بود. مواد و روش ها: در این مطالعه توصیفی - مقطعی از ۶ استخر عمومی سرپوشیده شهر ایلام به صورت سرشماری نمونه برداری و پارامترهای دما، کدورت، pH، کلر باقی مانده و کیفیت میکروبی در ۳ ماه از سال (دی تا اسفند) بررسی و با استاندارد ملی ایران به شماره ۹۴۱۲ و راهنمای نظارت و پایش آب استخرهای شنا و شناگاه های طبیعی مقایسه و با استفاده از آزمون پیرسون و تحت نرم افزار SPSSv16 مورد تجزیه و تحلیل قرار گرفت. یافته ها: نتایج مطالعه نشان داد که کمترین میزان تطابق با استانداردهای موجود در بین پارامترهای مورد مطالعه دما بوده است، که در ۸۳٪ موارد تطابق نداشت. بیشترین میزان تطابق را در بین پارامترهای مورد مطالعه مربوط به کلیفرم مدفوعی با ۹۴٪ مطابقت بود. کدورت، pH، کلر باقی مانده، کلیفرم کل و کلیفرم مدفوعی به ترتیب در ۶۱٪، ۶۷٪، ۸۳٪، ۸۳٪ و ۹۴٪ موارد نمونه های مورد مطالعه با استاندارد مطابقت داشت. نتیجه گیری: بر اساس نتایج بدست آمده، رعایت بهداشت فردی، دوش گرفتن قبل از شنا، تعویض به موقع فیلترهای تصفیه، متناسب کردن زمان ماند آب استخر با تعداد و بهداشت شناگران جهت کنترل میزان کدورت و استفاده از سنسورهای حرارتی و کنترل خودکار برای تنظیم دما توصیه می گردد.},
keywords_fa = {استخرهای شنا, کیفیت میکروبی, شهر ایلام},

doi = {10.61882/jehe.13.1.108},
url = {http://jehe.abzums.ac.ir/article-1-1084-en.html},  
eprint = {http://jehe.abzums.ac.ir/article-1-1084-en.pdf},  
journal = {Journal of Environmental Health Engineering},  
issn = {2383-3211}, 
eissn = {2588-4239}, 
year = {2025}  
}

