@article{ author = {Latifi, Noushin and Alimohammadi, Mahmood and NabizadehNodehi, Ramin and Mahvi, Amirhosein and Yaghmaeian, Kamyar}, title = {Comprehensive Investigation of Nitrate Concentration in Iranian Bottled Water Using ion Chromatography}, abstract ={Background: In recent years, consumption of bottled water has increased in many countries, including Iran. Bottled waters sometimes can be contaminated by chemical agents such as nitrate which cause healthy effects on consumers. So, quality monitoring of such waters has great importance. The aim of this study was evaluation of nitrate concentration in existing bottled waters in Iran. Methods: This descriptive cross- sectional study was performed to determine nitrate in Iranian bottled water in 2014. 71 water sample brands were collected from different geographical regions and were examined by Ion chromatography (IC). Results: Obtained results showed that nitrate concentration in all examined water samples ranged from 0.15 to 50.1 mg/L and average of nitrate concentration was 10.55±9.9 mg/L. Also, in most brands, results of examination concentration were higher than concentration of nitrate on labels. Conclusion: In all exanimated brands, nitrate concentrations were incompliance with WHOand Iranian standards. 70 brands were lower than USEPA, FDA, and IBWA standards.}, Keywords = { Bottled Water, Chemical Quality, Nitrate Concentration}, volume = {2}, Number = {1}, pages = {1-6}, publisher = {alborz university of medical sciences}, title_fa = {ارزیابی جامع مقدار نیترات موجود در آب‌های بطری شده ایران با استفاده از کروماتوگرافی یونی}, abstract_fa ={زمینه و هدف: در سال های اخیر مصرف آب‌های بطری شده در بسیاری از کشورها از جمله ایران افزایش یافته است. آب‌های بطری شده گاهی ممکن است آلوده به عوامل شیمیایی نظیر نیترات باشند که باعث ایجاد عوارض بهداشتی در مصرف کنندگان می گردد. بنابراین پایش کیفیت این آب‌ها اهمیت زیادی دارد. هدف این مطالعه، بررسی مقدار نیترات موجود در آب‌های بطری شده ایران بود. مواد و روش‌ها: این مطالعه توصیفی- مقطعی، برای تعیین میزان نیترات موجود در آب‌های بطری شده ایران در سال 1393 انجام شد. 71 برند مختلف نمونه آب، از مناطق مختلف جغرافیایی جمع آوری و با استفاده از دستگاه کروماتوگرافی یونی آزمایش گردید. یافته ها: نتایج بدست آمده نشان داد که غلظت نیترات در همه نمونه‌ها در دامنه 1/50- 15/0 میلی گرم در لیتر و میانگین نیترات ۹/۹±55/10 میلی گرم در لیتر بود. همچنین در بیشتر برندها، نتایج آزمایشات بیشتر از غلظت نیترات بر روی برچسب بطری بود. نتیجه‌گیری: نتایج غلظت نیترات در همه نمونه های مورد مطالعه، مطابق با استاندارد ملی ایران و سازمان بهداشت جهانی قرار دارد. در ۷۰ برند، مقدار نیترات کمتر از استانداردهای آژانس حفاظت محیط زیست امریکا، سازمان غذا و داروی آمریکا و انجمن بین المللی آب‌های بطری شده بوده است.}, keywords_fa = {آب بطری شده, کیفیت شیمیایی , غلظت نیترات}, doi = {10.18869/acadpub.jehe.2.1.1}, url = {http://jehe.abzums.ac.ir/article-1-116-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-116-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2014} } @article{ author = {Moazzen, Mojtaba and Rastkari, Noushin and Alimohammadi, Mahmood and Shariatifar, Nabi and Ahmadkhaniha, Reza and Nazmara, Shahrokh and Akbarzadeh, Arash and Azari, Ali and Nabizadeh, Ramin and JahedKhaniki, GholamRez}, title = {Assessment of Phthalate Esters in A Variety of Carbonated Beverages Bottled in PET}, abstract ={Background: Phthalate esters are polymeric compounds usually used as a plasticizer. These materials can enter to the human body through various ways the main way could be food packaging. Chronic contact with these materials could result cancer, including breast cancer in women and prostate cancer in men as well as other endocrine problems. The objective of this study was to assess the concentration of phthalate esters in carbonated beverages. Methods: In this study, a magnetic nano-scale adsorbent, made from carbon nanotubes and Fe3O4. Deposition of Fe3O4 on the adsorbent could result in improvement of adsorption and desorption as well as extraction procedure. Then, by means of adsorbent and solvent extraction, phthalate esters were extracted from the beverage matrices and determined using GC-MS analysis. Results: amongst studied ingredients, BEP or DEHP, that have been found to be carcinogenic, had highest concentration in beverages, and also the brand of A and taste of C had the highest average concentration. Except one sample, the total amounts of these ingredients were below than international standards. Conclusion: Based on the results, consumers can use these beverages without any concern regarding phthalate esters amounts. The results also demonstrated that this synthesized adsorbent has good performance for extraction of phthalates from studied matrices.}, Keywords = {Phthalate Esters, Beverage, Magnetic Carbon Nanotubes}, volume = {2}, Number = {1}, pages = {7-18}, publisher = {alborz university of medical sciences}, title_fa = {بررسی حضور استرهای فتالات در نوشابه ‌های کربناته بطری شده در بطری‌های پلی‌اتیلن ترفتالات (PET)}, abstract_fa ={زمینه و هدف: استرهای فتالات معمولاً به ‌عنوان پلاستی‌سایزر در ساخت ترکیبات پلیمری استفاده می‌شوند. این مواد از راه‌های مختلفی می‌توانند وارد بدن انسان شوند که در این میان، مقدار قابل‌ توجهی از طریق بسته‌بندی مواد غذایی می‌باشد. برخورد مزمن با این مواد، در بروز انواع سرطان از جمله سرطان پستان در بانوان و سرطان پروستات در آقایان و نیز سایر بیماری‌ها نقش دارند. هدف از این مطالعه، بررسی حضور استرهای فتالات در نوشابه های کربناته می‌باشد. مواد و روش‌ها: در این مطالعه، ابتدا یک ترکیب مغناطیسی در اندازه نانو با ترکیب نانوتیوب و اکسید آهن ایجاد گردید. نشاندن آهن روی جاذب مذکور، منجر به افزایش میزان جذب و واجذب توسط آهن‌ربا و جداسازی آسان شد. در مرحله بعد، به کمک این جاذب، استرهای فتالات را از ماتریکس نوشابه استخراج و توسط دستگاه GC-MS میزان هرکدام از آنها اندازه‌گیری شد. یافته‌ها: در بین ترکیبات مطالعه شده، ترکیب BEP یا DEHP که خطر سرطان‌زایی آن نیز محرز شده است، بیشترین میزان را در نوشابه‌ها دارا بود که بالاترین مقدار میانگین غلظت آن، مربوط به برند A و طعم C بود. میزان این ترکیب، در تمامی نمونه‌ها به‌جز یک مورد، از استانداردهای بین‌المللی پایین‌تر بوده است. نتیجه‌گیری: بر اساس نتایج حاصل می‌توان اظهار نمود به دلیل پایین بودن میانگین کل استرهای فتالات در نوشابه، خطر جدی از بابت مصرف این محصولات برای انسان وجود ندارد. نکته دیگر، اینکه این جاذب توانایی لازم جهت کاربرد اندازه‌گیری استرهای فتالات را داراست.}, keywords_fa = {استرهای فتالات, نوشابه, کربن نانوتیوبهای مغناطیسی}, doi = {10.18869/acadpub.jehe.2.1.7}, url = {http://jehe.abzums.ac.ir/article-1-117-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-117-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2014} } @article{ author = {Kiyani, Amin and Alimohamadi, Mahmood and Rezaee, Sasan and NabizadehNodehi, Ramin and Naseri, Simin and Dehghanifard, Emad and Moazzen, Mojtab}, title = {Preparation of an Evaluated HACCP- Plan in Order to Implementation in Iranian Mineral Water Factories for Avoiding the Common Food Safety Hazards in Such Industries}, abstract ={Background: consumption of mineral waters in the world has increased in recent years, and also concerns of consumers about its contamination are growing. Thereby, implementation of such a protective system as HACCP can prevent contamination of waters by different agents. This research aimed to develop an HACCP-Plan standard for mineral waters manufacturing factories in Iran. Methods: In current study, like production lines, polyethylene terephthalate (PET) containers packaging, warehouses and laboratories sections of factories were observed from view of production and quality control. To monitor, control and restrict the hazards, seven principles of HACCP were considered. In continue applicable solutions were presented inclusive and practically for all factories. Required information were verified and presented through investigation of national and international standards. Results: The results shown that lack of sanitizing mineral water supplies and factories environment, incomplete water treatment, non-standard production of PET bottles, improper storage of raw materials and final product, and lack of inspection of equipment led to the increasing health hazards of the product and endanger the consumers health. Conclusion: In order to produce safe mineral water, it is necessary to sanitize the water supplies and factory environment. In addition, the process of water treatment and the production of PET bottles must be according to national and international standards. As the implementation of the HACCP system in various mineral water producing factories is not same, application of developed system in this research will be effective to standardize the implementation of this system in plants.}, Keywords = {Mineral water, HACCP-plan, Hazards Control, Polyethylene terephthalate}, volume = {2}, Number = {1}, pages = {19-26}, publisher = {alborz university of medical sciences}, title_fa = {تدوین یک HACCP-Plan استاندارد جهت به‌کارگیری در کارخانجات تولید آب معدنی ایران به منظور کنترل مهم‌ترین مخاطرات مطرح در بهداشت مواد غذایی موجود در این صنعت}, abstract_fa ={زمینه و هدف: استفاده از آب‌های معدنی در جهان افزایش یافته و همچنین آلودگی این آب‌ها باعث نگرانی مصرف‌کنندگان شده است. بکارگیری یک سیستم پیشگیرانه مانندHACCP می‌تواند مانع از آلودگی این آب‌ها توسط عوامل مختلف شود. هدف این تحقیق، تدوین یک HACCP-Plan استاندارد در کارخانجات آب معدنی ایران می‌باشد. مواد و روش‌ها: در این مطالعه، خطوط تولید آب معدنی و ظروف پلی ‌اتیلن ‌تری فتالات (PET)، انبارها و آزمایشگاه‌های کارخانجات از جنبه‌های تولید و کنترل کیفیت بررسی شدند. اصول هفت گانه سیستم HACCP در جهت پایش، کنترل و محدود‌سازی این مخاطرات بررسی شد. در ادامه، راهکارهای عملی بصورت فراگیر و قابل پیاده‌سازی برای همه کارخانجات ارائه شدند. اطلاعات لازم با مطالعه استانداردهای ملی و بین‌المللی صحه‌گذاری و ارائه گردیدند. یافته‌ها: نتایج نشان داد که خطرات ناشی از عدم بهسازی منابع آب معدنی و محیط کارخانه، فرآیند ناقص تصفیه، تولید بطری‌های PET بصورت غیر‌استاندارد، ذخیره سازی نادرست مواد اولیه و محصول نهایی و عدم بازرسی تجهیزات کارخانجات باعث افزایش مخاطرات در محصول و به خطر انداختن سلامت مصرف‌کننده می‌گردد. نتیجه گیری: جهت تولید آب معدنی سالم، باید منابع تأمین آب معدنی و محیط کارخانجات بهسازی شوند. همچنین می‌بایست که فرآیند تصفیه آب و تولید بطری‌های PET، طبق استانداردهای ملی و بین‌المللی انجام گیرد. از آنجایی که نحوه اجرای سیستم HACCP در کارخانجات آب معدنی متفاوت است، بکارگیری سیستم تدوین شده در این مطالعه، جهت استاندارد‌سازی اجرای این سیستم در کارخانجات موثر می‌باشد.}, keywords_fa = {آب معدنی, برنامه HACCP, کنترل مخاطرات, ظروف پلی‌اتیلن تری‌فتالات}, doi = {10.18869/acadpub.jehe.2.1.19}, url = {http://jehe.abzums.ac.ir/article-1-118-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-118-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2014} } @article{ author = {MajlesiNasr, Monire and Hosseini, Mehdi}, title = {Evaluation of the Quality, Quantity and Management of Dental Waste in 4 Dental Clinics of Tehran City}, abstract ={Objective: Dental wastes are one of the environmental issues which are of great importance due to having hazardous, toxic, and pathogenic agents such as infectious, medical, chemical, and toxic wastes. The objective of this study was to determine the quality, quantity, and management of dental wastes in 4 dental clinics in Tehran. Methods: In this cross-sectional descriptive study, the study area was consisted of 4 dental clinics in west, center, east, and north of Tehran city. Overall, 195 samples were taken. Then, the wastes were manually segmented and divided into 36 parts. In continue they were weighted using a laboratory scale. In order to examine the current state and the implementation process of hazardous dental waste management, we applied a checklist technique which was containing 54 questions. Results: According to the obtained scores, management quality of 3 clinics was proved to be at an average level and only clinic number 4 was perfectly managed. The capita percentage for infectious waste except for clinic 1, which was 50%, was 48% for all clinics. The capita percentage for chemical-pharmaceutical waste except for clinic 1, which was 36%, was 48% for all clinics. The amount of toxic waste for each clinic was 13%. The averages of infectious, toxic and chemical-pharmaceutical wastes were 187.09 ± 9.81, 48.38 ± 1.4, and 147± 4.33 g per capita per day, respectively. Conclusion: Considering the existence of different types of materials with different components and various features in dental wastes, their optimal management must be done based on their specific features which are include plans for generation reduction, segmentation, separation, and recycling of these wastes.}, Keywords = {Dental Waste, Infectious Waste, Toxic Wastes, Hazardous Waste}, volume = {2}, Number = {1}, pages = {27-38}, publisher = {alborz university of medical sciences}, title_fa = {بررسی کیفیت، کمیت و مدیریت پسماندهای دندانپزشکی در 4 کلینیک دندانپزشکی شهر تهران}, abstract_fa ={زمینه و هدف: پسماندهای دندانپزشکی یکی ازبزرگترین معضلات زیست محیطی هستند که به علت دارا بودن عوامل خطرناک سمی و بیماریزا از جمله مواد زائد عفونی، دارویی و شیمیایی- سمی از حساسیت خاصی برخوردار است. هدف این مطالعه تعیین کیفیت، کمیت و مدیریت پسماندهای دندانپزشکی در 4 کلینیک دندانپزشکی شهر تهران بود. مواد و روش ها: در این مطالعه توصیفی- مقطعی جامعه مورد بررسی 4 کلینیک دندانپزشکی در غرب، مرکز، شرق و شمال شهر تهران بود. در مجموع 195 نمونه برداشت شد. سپس نمونه پسماند بصورت دستی به 36 جزء جداسازی شد. در ادامه با استفاده از ترازوی آزمایشگاهی توزین گردیدند. برای ارزیابی وضع موجود و روند اجرایی مدیریت پسماند خطرناک دندانپزشکی، از یک چک لیست حاوی 54 سوال استفاده کردیم. یافته‌ها: بر اساس نمرات بدست آمده، وضعیت مدیریت 3 کلینیک متوسط و فقط کلینیک شماره 4 مدیریت خوبی داشت. درصد سرانه بخش عفونی پسماندها بجز کلینیک شماره یک که 50 درصد بود، بقیه 48 درصد حاصل شد. درصد سرانه برای بخش شیمیایی- دارویی پسماندها بجز کلینیک شماره یک که 36درصد بود، بقیه کلینیکها 48 حاصل شد. سرانه برای بخش سمی در همه کلینیکها، 13درصد بود. میانگین سرانه پسماند عفونی، سمی و شیمیایی- دارویی به ترتیب برابر با 81/9± 09/187 ، 4/1±38/48 و 33/4±147 گرم در روز بود. نتیجه گیری: با توجه به وجود انواع مواد و اجزای مختلف با خصوصیات متفاوت در پسماندهای های دندانپزشکی، مدیریت بهینه این نوع پسماندها می بایست بر اساس خصوصیات ویژه آن صورت پذیرد که شامل برنامه‌های کاهش تولید پسماند، جداسازی و بازیافت و استفاده مجدد می‌باشد.}, keywords_fa = {پسماند دندانپزشکی, پسماند عفونی, پسماند سمی, پسماند خطرناک}, doi = {10.18869/acadpub.jehe.2.1.27}, url = {http://jehe.abzums.ac.ir/article-1-120-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-120-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2014} } @article{ author = {Tulabi, Zahra and Mazloomi, Sajad and NazariLangroodi, Attaullah and Mahmoudi, Ellahe}, title = {Evaluation of the Effect of UV Radiation on the Fungal Species Before and After Surgery Operations in the Alborz Province Hospitals}, abstract ={Background: Hospital operating rooms are one of the most sensitive parts of hospital which observe their hygiene is very important. Fungal spores present in the hospital air can cause many nosocomial infections. The Aim of this study was to determine the prevalence of fungal pollution in the air of operation room in the Alborz Province selected hospitals. Methods: In this study, the operating rooms of two hospitals were selected according to the type of activity and hospitalized patients for sampling. Sampling was carried out before the first operation at 6 AM, when the operating room had been disinfected by UV light, and after the last operation at 12 PM, when the pollution was too much. Samples were cultured on Sabouraud Dextrose Agar according to open plate method. Results: The most fungi found in the hospitals operating rooms air were allocated to the Cladosporium, Penicillium, Mucor, and Aspergillus flavus genus which were equal to 36.8%, 18.47, 13.2, and 10.5%, respectively. The highest and lowest pollution rate was related to operating room and cosmetic surgery room, respectively. Conclusion: According to the obtained results, a positive pressure ventilation system can be a good option to control and prevention of nosocomial infections caused by fungi agents.}, Keywords = {Nosocomial infections, operating rooms, UV lamp }, volume = {2}, Number = {1}, pages = {39-45}, publisher = {alborz university of medical sciences}, title_fa = {بررسی استفاده از نور UV بر روی تعداد عوامل قارچی قبل و بعد از عمل جراحی در بیمارستان‌های استان البرز}, abstract_fa ={زمینه و هدف: از حساسترین بخشهای بیمارستان‌ها اتاق‌های عمل می‌باشند که رعایت بهداشت آنها از اهمیت بالایی برخوردار است. اسپورهای قارچی موجود در هوای بیمارستان می‌تواند عامل بسیاری از عفونتهای بیمارستانی باشند. هدف از این مطالعه تعیین میزان شیوع آلودگی قارچی در هوای اتاق عمل بیمارستان‌های منتخب استان البرز بود. روش بررسی: در این تحقیق اتاق‌های عمل مختلف دو بیمارستان، با توجه به نوع فعالیت و بیماران بستری شده، انتخاب شدند. زمان نمونه برداری ساعت 6 صبح، قبل از اولین عمل (زمانی که اتاق عمل توسط لامپ UV گندزدایی شده بود) و ساعت 12 شب بعد، از آخرین عمل (زمانی که مقدار آلودگی زیاد بود) انجام گرفت. نمونه‌ها بر روی محیط سابارو دکستروز آگار و به روش پلیت باز کشت داده شدند. یافته‌ها: بیشترین درصد قارچ‌های مشاهده شده در هوای اتاق‌های عمل بیمارستان‌ها، به ترتیب به جنسهای کلادوسپوریوم، پنیسیلیوم، موکور و آسپرژیلوس فلاووس به ترتیب با 8/36%، 47/18%، 2/13% و 5/10% اختصاص داشت. بیشترین و کمترین میزان آلودگی به ترتیب مربوط به اتاق عمل جراحی و اتاق عمل زیبایی بود. نتیجه گیری: با توجه به نتایج حاصل شده، یک سیستم تهویه فشار مثبت می‌تواند یک گزینه پیشنهادی مناسب برای کنترل و پیشگیری عفونت‌های بیمارستانی ناشی از عوامل قارچی باشد.}, keywords_fa = {عفونتهای بیمارستانی, اتاق‌های عمل, لامپ UV}, doi = {10.18869/acadpub.jehe.2.1.39}, url = {http://jehe.abzums.ac.ir/article-1-121-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-121-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2014} } @article{ author = {JavanSiamardi, Safoora and RezaeiKahkha, Mohammad Reza and SafaeiMoghaddam, Atefeh and Noori, Roghayeh}, title = {Survey of Heavy Metals Concentration (Fe، Ni، Cu، Zn، Pb) in Farmland Soils of Sistan Central Part}, abstract ={Background: Heavy metals pollution not only influences directly on physical and chemical properties, biological activity reduction, and mass access reduction of rich materials of soil, but also is considered as a serious harm in food safety and environment security. Therefore, protection of this resource and security of permanency is important. For this purpose, in this study concentration of heavy metals such as iron, copper, zinc, and nickel has been explored in agriculture soil of Sistan province central area. Methods: This study was applicable-infrastructural and 160 samples of soil from agriculture lands of central of Sistan's area were collected randomly. Iron, copper, zinc, lead, and nickel have been measured using FlameAtomic Absorption Spectrometer according t standard method.  Results: Concentration average of Iron, nickel, Copper, zinc, and lead were 340.96, 18.56, 7.28, 19.806, and 29.909 mg/kg, respectively. Conclusion: The concentration of iron, lead, nickel, zinc, and cooper in agricultural soil was less than limited levels of WHO and according to this case; there was no problem in soil health.}, Keywords = {Heavy Metals, Agricultureal Soil, Soil Pollution}, volume = {2}, Number = {1}, pages = {46-53}, publisher = {alborz university of medical sciences}, title_fa = {بررسی غلظت فلزات سنگین (آهن، نیکل، مس، روی، سرب) در خاک کشاورزی بخش مرکزی سیستان}, abstract_fa ={زمینه و هدف: آلودگی فلزات سنگین نه تنها به طور مستقیم بر خصوصیات فیزیکی و شیمیایی خاک، کاهش فعالیت بیولوژیکی و کاهش دستیابی زیستی مواد مغذی خاک تأثیر می گذارند، بلکه خطر جدی برای سلامتی انسان و امنیت غذایی به حساب می آیند. بنابراین، حفاظت از این منبع و اطمینان از پایداری آن حائز اهمیت می باشد. به این منظور در این مطالعه، میزان غلظت فلزات سنگین آهن، سرب، مس، روی و نیکل در خاک کشاورزی بخش مرکزی سیستان بررسی شده است. مواد و روش ها: این مطالعه از نوع بنیادی- کاربردی بوده و 160 نمونه خاک از زمین های کشاورزی بخش مرکزی سیستان بصورت تصادفی نمونه برداری شد. مقادیر آهن، سرب، روی، نیکل و مس با استفاده از دستگاه جذب اتمی شعله ای، طبق روش استاندارد متد اندازه گیری شد. یافته‌ها: میانگین غلظت فلزات آهن، نیکل، مس، روی و سرب به ترتیب برابر با 340.96، 18.56، 7.26، 19.806، 29.909 میلی‌گرم بر کیلوگرم می باشد. نتیجه گیری : مقادیر آهن، سرب، نیکل، روی و مس در خاک کشاورزی در منطقه کمتر از حد مجاز سازمان جهانی بهداشت (WHO) بوده است و از این نظر مشکلی در سلامت خاک وجود ندارد.}, keywords_fa = {فلزات سنگین, خاک کشاورزی, آلودگی خاک}, doi = {10.18869/acadpub.jehe.2.1.46}, url = {http://jehe.abzums.ac.ir/article-1-122-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-122-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2014} } @article{ author = {Zarei, Salman and Dehvari, Mahboubeh and Jamshidi, Behzad and Sadani, Mohse}, title = {Investigation of Acorn fruit Ash Efficiency in Cadmium Removal from Aqueous Solutions: Adsorption Isotherm and Kinetic Studies}, abstract ={Background: Heavy metals are known as significant pollutants because of toxicity and nonbiodegradable characteristics. Cadmium is one of the heavy metals that have carcinogen potential. So, this study carried out in order to investigate the acorn fruit ash efficiency in cadmium removal from aqueous solutions. Methods: This study was done in the batch laboratory conditions. In this study, the effect of different parameters including pH, contact time, adsorbent dose, and initial cadmium concentration were evaluated. The Langmuir, Freundlich and Temkin isotherm models were used for analysis of the equilibrium isotherm. Adsorption kinetics of cadmium by different models were also investigated. The measurement of residual cadmium in the samples was determined by atomic absorption spectrophotometry at 228.8 nm. The SPSS-16 software was used for analysis of data. Results: According to the results, the maximum adsorption capacity of cadmium was 9.29 mg/g at pH=7 and 8 g/L adsorbent dose. The removal efficiency was increased with increasing contact time and decreased with increasing of cadmium initial concentration. Investigation of achieving data showed that the adsorption process followed better by Freundlich isotherm and the pseudo-second order kinetic. Conclusions: According to the results of this study, it could be concluded that the acorn fruit ash had high ability in cadmium adsorption and could be used as a cheap adsorbent in the removal of cadmium.}, Keywords = {Heavy metals, Adsorption process, Acorn fruit ash}, volume = {2}, Number = {1}, pages = {54-64}, publisher = {alborz university of medical sciences}, title_fa = {بررسی کارایی خاکستر میوه بلوط در حذف کادمیوم از محلول‌های آبی: مطالعات ایزوترم و سینتیک جذب}, abstract_fa ={زمینه و هدف: فلزات سنگین به دلیل سمیت و عدم تجزیه بیولوژیکی، به عنوان آلاینده‌های حائز اهمیت شناخته شده‌اند. کادمیوم از جمله فلزات سنگین بوده که دارای پتانسیل سرطانزایی است. لذا این مطالعه با هدف بررسی کارایی خاکستر میوه بلوط در حذف کادمیوم از محلول‌های آبی انجام شده است. مواد و روش‌ها: این مطالعه در شرایط آزمایشگاهی و به صورت ناپیوسته انجام گرفت. طی این مطالعه، تأثیر پارامترهایی نظیر pH، زمان تماس، جرم جاذب و غلظت اولیه کادمیوم ارزیابی شد. مدل‌های ایزوترم لانگمویر، فروندلیچ و تمکین برای آنالیز نتایج ایزوترم تعادلی مورد بررسی قرار گرفت. سینتیک‌های جذب کادمیوم نیز توسط مدل‌های مختلف بررسی گردید. اندازه‌گیری مقدار باقیمانده کادمیوم در نمونه‌ها با استفاده از روش طیف‌سنجی جذب اتمی در طول موج 8/228 نانومتر انجام شد. جهت آنالیز داده ها از نرم افزار SPSS16 استفاده گردید. یافتهها: مطابق با نتایج به دست آمده، حداکثر ظرفیت جذب کادمیوم برابر با mg/g29/9 در 7=pH و جرم جاذب g/l 8 به دست آمد. نتایج نشان داد که با افزایش زمان تماس، راندمان حذف کادمیوم افزایش یافته و با افزایش غلظت اولیه کادمیوم راندمان حذف کاهش یافت. بررسی داده‌های به دست آمده نشان داد که فرآیند جذب، از ایزوترم فروندلیچ تبعیت می‌کند و با سینتیک شبه درجه دوم تطابق بهتری دارد. نتیجهگیری: با توجه به نتایج این تحقیق، مشخص شد که خاکستر میوه بلوط توانایی بالایی در جذب کادمیوم داشته و می‌تواند به عنوان یک جاذب ارزان قیمت در حذف کادمیوم مورد استفاده قرار گیرد.}, keywords_fa = {فلزات سنگین, فرآیند جذب, خاکستر میوه بلوط}, doi = {10.18869/acadpub.jehe.2.1.54}, url = {http://jehe.abzums.ac.ir/article-1-123-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-123-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2014} } @article{ author = {Amoei, Abdoliman and Asgharnia, Hosein Ali and Karimian, Kamaleddin and Mahdavi, Yosef and Balarak, Davoud and Ghasemi, Seyed Mehdi}, title = {Efficiency of Response Surface Methodology for Optimizing Removal of Crystal Violet (CV) from Aqueous Solutions by Modified Barley Straw}, abstract ={Background: One of the most important sources of environmental pollution is dye from industrial wastewater which is harmful for human health and environment. Therefore, the aim of this study was to evaluate removal of Crystal violet (CV) dye from aqueous solutions by citric acid modified barley straw using response surface methodology. Methods: This research was an experimental-laboratory study. The batch experiment was conducted to evaluate the effect of pH, dye concentration, adsorbent dosage, and contact time on dye removal from aqueous solution. Response surface methodology was applied to appraise the effect of these different variables. The dye concentration in the solutions was measured by spectrophotometer at the wavelength of 594 nm. Results: The result of this research showed that dye removal efficiency was increased by increasing of adsorbent dosage, pH, and contact time, whilst decreased by increasing of initial dye concentration. The Maximum and minimum dye removal were obtained 94 and 35 percent, respectively. Analysis of variances test showed that the linear model was the best model to explain the interaction of variables. Conclusion: According to the obtained results, modified barley straw appears to be used as a suitable, low cost, and efficient adsorbent for removal crystal violet dye from aqueous solutions.}, Keywords = {Barley straw, Crystal violet dye, Adsorption process, Response surface methodology}, volume = {2}, Number = {1}, pages = {65-75}, publisher = {alborz university of medical sciences}, title_fa = {کارایی روش پاسخ سطح در بهینه‌سازی حذف کریستال ویوله از محیط‌های آبی به وسیله کاه جو اصلاح‌شده}, abstract_fa ={زمینه و هدف: یکی از مهمترین منابع آلودگی محیط زیست رنگ ناشی از فاضلاب صنایع رنگ می‌باشد که برای انسان و محیط‌زیست مخاطراتی ایجاد می کند. لذا هدف از این مطالعه، بررسی کارایی حذف رنگ کریستال ویوله از محیط‌های آبی با استفاده از کاه جو اصلاح شده با اسید سیتریک توسط روش پاسخ سطح می‌باشد. مواد و روش کار: این مطالعه، یک پژوهش تجربی-آزمایشگاهی می‌باشد. از آزمایشات ناپیوسته به منظور ارزیابی اثر pH، غلظت رنگ، دوز جاذب و زمان تماس در حذف رنگ از محیطهای آبی استفاده شد. در آزمایشات از روش پاسخ سطح به منظور ارزیابی اثرات متقابل این متغیرها استفاده شد. غلظت رنگ نمونه‌ها با استفاده از اسپکتروفتومتر در طول موج 594 نانومتر اندازه‌گیری شد. یافته‌ها: نتایج این تحقیق نشان داد که با افزایش مقدار جاذب، pH و زمان تماس، راندمان حذف رنگ افزایش یافت در حالی که با افزایش غلظت اولیه رنگ، راندمان حذف کاهش یافت. بیشترین و کمترین درصد حذف رنگ به ترتیب 94 و 35 درصد حاصل شد. آزمون آنالیز واریانس نشان دادکه مدل خطی، بهترین مدل برای تبیین برهمکنش متغیرهای مطالعه می‌باشد. نتیجه‌گیری: بر مبنای نتایج حاصل از این مطالعه به نظر می‌رسد که کاه جو اصلاح شده می‌تواند به عنوان یک جاذب مناسب، ارزان قیمت و کارا در حذف رنگ کریستال ویوله از محلول‌های آبی مورد استفاده قرارگیرد.}, keywords_fa = {کاه جو, رنگ کریستال ویوله, فرآیند جذب سطحی, روش پاسخ سطح}, doi = {10.18869/acadpub.jehe.2.1.65}, url = {http://jehe.abzums.ac.ir/article-1-124-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-124-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2014} } @article{ author = {Kahrizi, Hoda and Farasati, Masumeh and Bafkar, Ali}, title = {Batch Experiment of Cu Removal from Aquous Solution by Phragmites Australis Nanostructure}, abstract ={Background: Water and soil pollution by heavy metals is a serious threat to environment and human health. Therefore finding an effective method for removing heavy metals from water is very important. The main objective of this research is to investigate the possibility of removing Cu (II) from aqueous solution using Phragmites australis micro and nanoparticles. Methods: Phragmites australis natural adsorbents were prepared from Khuzestan canebrakes and characterized by PSA, IDEX, SEM and FTIR. The effects of various parameters such as pH, pHpzc, contact time, adsorbent dosage, and primary copper ion concentration on cu removal were studied. Results: The results indicated that the maximum removal of Cu (II) was equal to 80.22 and 90.85% for phragmites australis micro and nanosorbent. Amongst studied kinetic models, the most consistent and the least errors amount was accordance with Elovich model and the correlation coefficient for micro and nanosorbent was 85% and 99%, respectively. The adsorption isotherm data were fitted to Langmuir model and the Langmuir adsorption capacity for micro and nanosorbent was equal to 5.23 and 8.59 mg g−1, recpectively. Conclusion: Overally, the results revealed that Phragmites australis nanosorbent can be an attractive option for copper removal from contaminated waters.}, Keywords = {Copper Removal, Aqueous Solution, Phragmites Australis Micro and Nanosorbent, Adsorption Isotherm}, volume = {2}, Number = {2}, pages = {76-88}, publisher = {alborz university of medical sciences}, title_fa = {آزمایش ناپیوسته حذف مس از محلول آبی توسط نانوساختار نی}, abstract_fa ={زمینه و اهداف: آلودگی آب و خاک به فلزات سنگین، تهدیدی جدی برای محیط زیست و سلامت بشر است. یافتن روشی مؤثر برای پالایش این فلزات از آب اهمیت فراوانی دارد. هدف از انجام این پژوهش، استفاده از جاذب گیاه نی در مقیاس میکرو و نانو به عنوان جاذب گیاهی و بررسی کارایی آن برای حذف فلز مس از محلول های آبی بود. مواد و روش ها: جاذب طبیعی نی، از نیزارهای خوزستان تهیه گردید و ویژگی های جاذب با استفاده از آنالیز PSA، IDEX، SEM و FTIR تعیین شدند. اثر پارامترهای مختلف مانند pH، pH در نقطه بار صفر، زمان تماس، دز جاذب و غلظت اولیه یون مس بر حذف مس بررسی گردید. یافته ها: نتایج نشان داد بالاترین راندمان حذف مس، در 6=pH برای میکرو و نانو جاذب نی به ترتیب 22/80 و 85/90 درصد اتفاق می افتد. از بین مدل های سینتیک مورد مطالعه، بیشترین همخوانی و کمترین مقدار خطا مطابق با مدل الوویچ و مقدار ضریب همبستگی برای میکرو و نانو جاذب نی به ترتیب برابر با 85/0 و 99/0 بود. برازش داده های متناسب با مدل لانگمویر بود و ظرفیت جذب لانگموئر برای میکرو و نانوذرات 25/5 و 59/8 میلی گرم بر گرم بود. نتیجه گیری: به طور کلی نتایج این پژوهش نشان داد نانو جاذب نی می تواند به عنوان یک گزینه مناسب برای حذف مس از آبهای آلوده مد نظر قرار بگیرد.}, keywords_fa = {حذف مس, محلول آبی, میکرو و نانو جاذب نی, ایزوترم جذب}, doi = {10.18869/acadpub.jehe.2.2.76}, url = {http://jehe.abzums.ac.ir/article-1-125-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-125-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Bahmani, Pegah and Maleki, Afshin and Salimi, Mohammad and Sadeghi, Shahram}, title = {Survey Physico-Chemical and Microbial Quality of Sanandaj City Swimming Pools Water}, abstract ={Background: Health of swimming pools is important to maintain health of swimmers that in case of failure to comply of health standards, can be lead to health problems and the transmission of infectious diseases to swimmers. The purpose of this study was to evaluate the water quality of swimming pools in Sanandaj city and compare of their results with the national standards. Methods: In this cross – sectional study, 108 water samples were collected from 9 swimming pools of Sanandaj city. Some parameters including residual chlorine, pH, turbidity, hardness, alkalinity, temperature and also microbial parameters such as heterotrophic bacteria, staphylococcus aureus, pseudomonas aeruginosa, fecal streptococcus, total coliform, and fecal coliform were evaluated. Results: The results of the study showed that residual chlorine, pH, turbidity, hardness, alkalinity, and temperature in 80.5%, 72.2%, 60.1%, 52.7%, 30.5%, and 100% of samples, respectively, which were in desirable limit. Also the population of total coliform, fecal coliform, and Staphylococcus aureus in 32.4%, 45.3%, and 96.3% of samples, respectively, were in desirable ranges. Conclusion: Based on the results, turbidity, hardness, alkalinity, and also population of total coliform and fecal coliform of some samples didn’t have conformity with standards that indicates the need for continuous monitoring of swimming pools water quality.}, Keywords = {Swimming pool, Physicochemical parameters, Microbial parameters}, volume = {2}, Number = {2}, pages = {89-97}, publisher = {alborz university of medical sciences}, title_fa = {بررسی کیفیت فیزیکو شیمیایی و میکروبی آب استخرهای شنای شهر سنندج}, abstract_fa ={زمینه و هدف: بهداشت استخرهای شنا جهت حفظ سلامت شناگران، از اهمیت ویژه ای برخوردار است که در صورت عدم رعایت موازین بهداشتی می تواند منجر به بروز مشکلات بهداشتی و انتقال بیماریهای عفونی به شناگران شود. هدف از این مطالعه، بررسی کیفیت آب استخرهای شنای شهر سنندج و مقایسه نتایج آن با استانداردهای ملی بود. مواد و روش ها: در این مطالعه توصیفی – تحلیلی، 108 نمونه آب از 9 استخر شنای شهر سنندج جمع آوری شده است. پارامترهای کلر آزاد باقیمانده، pH، کدورت، سختی، قلیائیت و دما و همچنین پارامترهای میکروبی نظیر باکتریهای هتروتروف، استافیلوکوک اورئوس، سودوموناس آئروژینوزا، استرپتوکوک مدفوعی، کلیفرم کل و کلیفرم مدفوعی مورد آنالیز قرار گرفتند. یافته ها: نتایج مطالعه نشان داد که به ترتیب مقدار کلر آزاد باقیمانده، pH، کدورت، سختی، قلیائیت و دما در %5/80، %2/72، %1/60، %7/52، %5/30 و %100 نمونه در حد مطلوب بوده است. همچنین جمعیت کلیفرم کل، کلیفرم مدفوعی و استافیلوکوک اروئوس به ترتیب در 4/32، 3/45 و %3/96 در محدوده مطلوب بودند. نتیجه گیری: بر اساس نتایج، کدورت، سختی و قلیائیت و همچنین جمعیت باکتریهای کلیفرم کل و کلیفرم مدفوعی در برخی نمونهها با استانداردها مطابقت نداشت که نشاندهنده ضرورت پایش مداوم کیفیت آب استخرهای شنا می باشد.}, keywords_fa = {استخر شنا, پارامترهای فیزیکوشیمیایی, پارامترهای میکروبی}, doi = {10.18869/acadpub.jehe.2.2.89}, url = {http://jehe.abzums.ac.ir/article-1-126-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-126-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Faraji, Hossein and Naseri, Simin and Amouei, Abdoliman and Mohammadi, Farzad and soُSoheilarezomand, Hamidreza and Mahvi, Amir hossei}, title = {Survey Electrocoagulation Process in Removal of Acid Blue 113 Dye from Aqueous Solutions}, abstract ={Background: Treatment of textile industry wastewaters, due to having color and many pollutants, is one of the most important environmental issues. Acid Blue 113 dyes because of having benzene ring, which is not biodegradable, is toxic and carcinogen. The main objective of this study was determination of electrochemical process efficacy for removal acid blue 113 from aqueous solutions by using aluminum electrodes in batch reactor. Methods: This study performed in lab-scale in batch reactor. The effect of different parameters such as voltages (10, 20, and 40 volt), electrode distance (0.5 and 1 cm), and electrolysis times (5 to 80 min) was investigated. Results: The results of experiments demonstrated that with applying voltage 40V, 0.5 cm distance between electrodes, electrolyte concentration equal to 5 g/l, and 20 minutes electrolysis time, the color and COD removal rate was 99 and 78%, respectively. By increasing voltage and reaction time and reducing distance between the electrodes, power consumption is reduced and also final pH and dye removal efficiency increased. Conclusion: According to the results, the best removal efficiency of dye was obtained after 20 minutes contact time on the electric potential of 40 V, which was 99%. This process is environmental friendly and can be economically acceptable. Therefore, it can be results that electrocoagulation process by using aluminum electrode is an efficient and suitable method for acid blue 113 dye removal from aqueous solutions.}, Keywords = {Acid Blue 113 Dye, Aqueous Solutions, Electrocoagulation, Aluminum Electrodes}, volume = {2}, Number = {2}, pages = {98-107}, publisher = {alborz university of medical sciences}, title_fa = {بررسی کارایی فرآیند الکتروکواگولاسیون در حذف رنگزای اسیدبلو 113 از محیط‌های آبی}, abstract_fa ={زمینه و هدف: تصفیه پساب های صنایع نساجی به علت داشتن رنگ و آلاینده های زیاد، یکی از مهمترین مسائل محیط زیستی می‌باشد. رنگزای اسید بلو113، به دلیل داشتن حلقه بنزنی که غیر قابل تجزیه بیولوژیکی است، سمی و سرطانزا می‌باشد. هدف اصلی این تحقیق، بررسی کارایی فرآیند الکتروکواگولاسیون در حذف رنگزای اسید بلو 113 از محیطهای آبی با استفاده از الکترودهای آلومینیومی در راکتور ناپیوسته می‌باشد. روش کار: این مطالعه در مقیاس آزمایشگاهی به صورت پایلوت در سیستم ناپیوسته انجام شد. تاثیر پارامترهای مختلف از قبیل ولتاژ (10، 20 و40 ولت)، فاصله الکترودها (5/0 و 1 سانتی متر) و زمان الکترولیز (5 تا 80 دقیقه) بررسی شد. یافته ها: نتایج آزمایشها نشان داد که با اعمال ولتاژ 40 ولت، در فاصله الکترود 5/0 سانتی متر، 5 گرم الکترولیت و در زمان الکترولیز 20 دقیقه، میزان حذف رنگ و COD به ترتیب برابر 99 و 78% بود. با افزایش ولتاژ و زمان واکنش و با کاهش فاصله بین الکترودها، میزان مصرف انرژی کاهش یافت و همچنین pH نهایی پساب و راندمان حذف رنگزا افزایش یافت. نتیجه گیری: با توجه به نتایج، بهترین راندمان حذف رنگ بعد از 20 دقیقه زمان تماس، در پتانسیل الکتریکی 40 ولت حاصل شد که برابر 99 درصد بود. این فرآیند از نظر زیست محیطی ایمن بوده و از لحاظ اقتصادی می‌تواند قابل توجیه باشد. لذا می‌توان نتیجه گرفت که روش انعقاد الکتریکی با استفاده از الکترودهای آلومینیومی، یک روش مفید و مناسب برای حذف رنگزای اسید بلو 113 از محیطهای آبی می‌باشد.}, keywords_fa = {رنگزای اسید بلو 113, محلولهای آبی, انعقاد الکتریکی, الکترود آلومینیومی}, doi = {10.18869/acadpub.jehe.2.2.98}, url = {http://jehe.abzums.ac.ir/article-1-129-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-129-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Shokohi, Reza and Sadeghi, Shahram and Karimian, Kamal Adin and Saghi, Mohammad Hossie}, title = {Removal of Acid Cyanine 5R Dye by Surface Biosorption Process Using Dried Activated Sludge}, abstract ={Background: Dyes have complex molecular structures that are often toxic, carcinogenic, mutagenic, nonbiodegradable, and stable. Activated sludge is an adsorbents that basically in the biosorption process is an attractive technology for the separation and recycling of pollutants. Using sludge producing from wastewater treatment plants due to having low cost, availability, and reusability is growing. Methods: In this study, the dried activated sludge used for removal of Acid Cyanine 5R with concentrations of 25, 50, 75 and 100 mg/L. Effect of adsorbent concentration in weight of 0.2, 0.4, 0.8, 1.2, and 1.6 g/L, contact time, and pH were studied. Results: The results of the experiments showed that by increasing contact time up to 180 min increases dye removal efficiency and then remains constant. Also by increasing adsorbent dose, removal efficiency increased whilst by increasing pH, dye removal decreased. The results also show that the adsorption process follow pseodo second-order kinetic model with R2=0.9988. Conclusions: Due to the low cost and availability of dried activated sludge, it can be used as adsorbent in removal of dye from aqueas solutions.}, Keywords = {Biosorption, Dried Activated sludge, Acid Cyanine 5R Dye, Industrial Wastewater}, volume = {2}, Number = {2}, pages = {108-118}, publisher = {alborz university of medical sciences}, title_fa = {حذف رنگ Acid Cyanine 5R توسط فرآیند بیوجذب سطحی با کاربرد لجن فعال خشک شده}, abstract_fa ={زمینه و هدف: رنگ ها دارای ساختار پیچیده مولکولی که غالباً سمی، سرطانزا، جهش زا، غیر قابل تجزیه بیولوژیک و پایدار می باشند. لجن فعال یک جاذب بوده که اساساً در فرآیند جذب زیستی، یک تکنولوژی قابل توجه برای جداسازی و بازیافت آلاینده ها می باشد. استفاده از لجن تصفیه خانه های فاضلاب در فرآیند جذب زیستی ، به علت هزینه کم، در دسترس بودن و قابلیت استفاده مجدد، رو به گسترش است. مواد و روشها: در این مطالعه از لجن فعال خشک شده به عنوان جاذب در حذف رنگ اسیدی Acid Cyanine 5R با غلظت های 25، 50، 75 و 100میلی گرم در لیتر، استفاده شد. تاثیر غلظت جاذب در وزن های 2/0، 4/0، 8/0، 2/1 و 6/1 گرم در لیتر، تغییرات زمان تماس و pH مورد بررسی قرار گرفت. یافته ها: نتایج حاصل از آزمایشات نشان داد که با افزابش زمان تماس تا 180 دقیقه، راندمان حذف رنگ افزایش و پس از آن ثایت باقی می ماند. همچنین با افزایش دوز جاذب، میزان حذف رنگ افزایش یافت. این در حالی است که با افزایش pH، میزان حذف رنگ کاهش یافت. نتایج همچنین نشان می دهد که فرآیند جذب از مدل سینتیکی درجه دو کاذب با ضریب همبستگی 9988/0R2= تبعیت می کند. نتیجه گیری: با توجه به ارزان بودن و در دسترس بودن لجن فعال خشک، می توان از آن به عنوان جاذب در حذف رنگ از محیطهای آبی استفاده کرد.}, keywords_fa = {بیوجذب, لجن فعال خشک شده, رنگ Acid Cyanine 5R, فاضلاب صنعتی}, doi = {10.18869/acadpub.jehe.2.2.108}, url = {http://jehe.abzums.ac.ir/article-1-130-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-130-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Hosseini, Mehdi and Mazloomi, Sajad and HajiBagherTehrani, Sahba and Nazari, Fatemeh}, title = {Determine the Intensity of UV Radiation and H2O2 on the Removal of Methylene Blue from Synthetic Wastewater}, abstract ={Background: There is a tremendous amount of color in textile wastewater that discharge it to the environment can cause a lot of environmental problems. The aim of this study is to evaluate the photocatalytic process UV/H2O2 to remove methylene blue dye from synthetic wastewater. Methods: UVC lamp was used as light source. In this study the effect of UV light intensity, irradiation distance, hydrogen peroxide concentration, and reaction time on the removal of methylene blue from aqueous solutions were studied. Data was analyzed by SPSS 18 and excel software. Results: The result showed that with increasing concentration of hydrogen peroxide, the color removal increases. Color removal changes were negligible at H2O2 concentration more than 5 mM. After 10 minutes reaction time at H2O2 concentration of 1 mm, efficiency of UVC/H2O2 is equal to 36.6%. Whilst at 5 mM concentration, removal efficiency is 89.2%. By increasing intensity of UV radiation, dye removal measure is also was increased, as the highest percentage of dye removal was obtained at 24 W radiation intensity. Conclusion: in present study, type of radiation and measure of hydrogen peroxide were the main factors in removal of methylene blue. Due to high efficiency of UVC/H2O2 process in removal of dye from aqueous solution, this method can use as an efficient process for removal of dye.}, Keywords = {methylene blue Dye, Synthetic wastewater, UV radiation, Hydrogen peroxide}, volume = {2}, Number = {2}, pages = {119-127}, publisher = {alborz university of medical sciences}, title_fa = {تعیین اثر شدت تابش UV و H2O2بر حذف رنگزای متیلن بلو از فاضلاب سنتتیک}, abstract_fa ={زمینه و هدف: در فاضلاب صنایع نساجی، مقادیر بسیار زیادی رنگ وجود دارد که تخلیه آن به محیط می تواند مشکلات زیست محیطی زیادی را ایجاد کند. هدف از این مطالعه بررسی قابلیت فرآیند فتوکاتالیستی UV/H2O2 جهت حذف رنگ متیلن بلو از فاضلاب مصنوعی می‌باشد. مواد و روش ها: از لامپ UVC به عنوان منبع نور استفاده شد. در این مطالعه اثر پارامترهای شدت تابش نور UV، فاصله تابش، غلظت پراکسید هیدروژن و زمان واکنش بر راندمان حذف رنگ از محلولهای آبی مورد بررسی قرار گرفت. سپس داده‌ها ‌با استفاده از نرم افزار SPSS 18 و Excel مورد تجزیه و تحلیل قرار گرفت. یافته ها: نتایج نشان داد که با افزایش غلظت پراکسید هیدروژن، میزان حذف رنگ نیز افزایش می یابد. بعد از غلظت 5 میلی مول H2O2، در راندمان حذف تغییری چندانی دیده نشد. پس از 10 دقیقه زمان واکنش با H2O2 در غلظتmM 1، راندمان فرآیند UVC /H2O2 برابر با 6/36 درصد می باشد در حالی که در غلظت 5 میلی مول، راندمان حذف به 2/89 درصد رسید. لازم به ذکر است که هر چه شدت تابش بیشتر می شود، مقدار حذف رنگ نیز افزایش یافت. به طوری که در شدت تابش w24، بیشترین درصد حذف رنگ حاصل شد. نتیجه گیری: در این مطالعه نوع تابش و مقدار پراکسید هیدروژن، مهمترین عوامل موثر در حذف رنگ متیلن بلو می باشند. در نتیجه کارایی بالای فرآیند UVC/H2O2 در حذف رنگ از محیطهای آبی، این روش می تواند به عنوان یک فرآیند کارا و موثر در حذف رنگ استفاده شود.}, keywords_fa = {رنگزای متیلن بلو, فاضلاب سنتتیک, تابش UV, پراکسید هیدروژن }, doi = {10.18869/acadpub.jehe.2.2.119}, url = {http://jehe.abzums.ac.ir/article-1-131-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-131-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Samarghandi, Mohammad Reza and Tarlaniazar, Monireh and Mehranpoor, Razieh and Ahmadian, Mahnaz}, title = {Survey the Efficiency of Iron- Coated pumice in Fluoride Removal from Aqueous Solutions}, abstract ={Background: Shortage of fluoride in water sources leads to numerous health problems. Also excess fluoride concentration is a more serious threat for health of community. Thus investigating of various physical, chemical, and biological processes for excess fluoride reduction from water supplies is considerable. This study aimed to reduce fluoride ion concentration from aqueous solutions by adsorption process by iron-coated pumice. Methods: Firstly, the pumice pieces were grinded and sized. After several preparation stages pumice particles were covered by 0.5 N iron nitrates (III) solution. Then the effect of parameters including pH (2-10), reaction time (5-120 min), initial fluoride concentration (3– 20 mg/L), and the adsorbent dose (0.1-1.5 g/L) on removal efficiency of fluoride were investigated in a batch system. Finally adsorption isotherms and kinetics models were determined. Results: The results showed that the removal of fluoride increased by increasing of reaction time and adsorbent dose, and reduced by increasing of initial fluoride concentration. The Iron coated pumice exhibited the best performance for fluoride removal (84.3%) at fluoride concentration 3 mg/L, adsorbent dose 0.5 g/L, pH= 6, and contact time 30 min. The adsorption equilibrium data fitted well with the Langmuir model (R2= 0.9989), and kinetic adsorption study showed that pseudo-second order kinetic is more favorable. Conclusion: According to results, the iron-coated pumice is an efficient, low cost and available adsorbent that can be considered for eliminating of fluoride ions from aqueous solutions.}, Keywords = {Fluoride, Iron-Coated Pumice, Adsorption Process, Adsorption isotherm}, volume = {2}, Number = {2}, pages = {128-140}, publisher = {alborz university of medical sciences}, title_fa = {بررسی کارایی پامیس با پوشش آهن در حذف فلوراید از محلول‌های آبی}, abstract_fa ={سابقه و هدف: کمبود فلوئور در منابع آب، مشکلات بهداشتی متعددی را در پی دارد. همچنین غلظت­های بالای آن نیز تهدید جدی­تری برای سلامت جامعه می­باشد. بنابراین بررسی فرآیندهای مختلف فیزیکی، شیمیایی و بیولوژیکی به منظور کاهش غلظت­های بالای فلوئور از منابع آبی مورد توجه می­باشد. این پژوهش، با هدف کاهش غلظت یون فلوئور از محلول­های آبی توسط فرآیند جذب سطحی با پامیس با پوشش آهن انجام پذیرفت. مواد و روش­ها: ابتدا تکه­های پامیس خرد و سایزبندی گردید. پس از چند مرحله آماده­­سازی، ذرات پامیس با محلول نیترات آهن (III) 5/0 نرمال پوشش داده شد. سپس تأثیر پارامترهای مؤثر بر کارایی حذف فلوراید شامل pH محلول (10-2)، زمان واکنش (min 120-5)، غلظت اولیه فلوراید (mg/L20-3) و دوز جاذب (g/L 15-1) در سیستم ناپیوسته بررسی گردید. در نهایت مدل­های ایزوترمی و سینتیک­های واکنش تعیین شد.   یافته ها: نتایج نشان داد کارایی حذف فلوراید با افزایش دوز جاذب و زمان واکنش افزایش و با افزایش غلظت اولیه فلوراید کاهش می­یابد. بهترین عملکرد حذف فلوراید (3/84 درصد) در غلظت فلوراید mg/L 3، دوز جاذب g/L 5/0، 6 pH= و زمان تماس 30 دقیقه مشاهده شد. داده­های تعادلی جذب از مدل لانگمویر(99/0R2=) تبعیت ­نمود و مطالعه سینتیک جذب نشان داد واکنش با رابطه شبه درجه دوم مطابقت بیشتری دارد. نتیجه­گیری: با توجه به نتایج، پامیس با پوشش آهن به عنوان جاذب مؤثر، ارزان قیمت و در دسترس می­تواند در حذف یون فلوراید از محیط‌های آبی مورد توجه قرار گیرد.}, keywords_fa = { فلوراید, پامیس با پوشش آهن, فرآیند جذب سطحی, ایزوترم جذب}, doi = {10.18869/acadpub.jehe.2.2.128}, url = {http://jehe.abzums.ac.ir/article-1-132-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-132-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Aslani, Hassan and AliMohammadi, Mahmood and Mahmoodi, Babak and Ghoreishi, Bahareh and Khazaei, Mohammad and Ghani, Maryam and Askari, Masoomeh}, title = {Optimization of Coagulation Process Using Alum and Ferric Chloride for Surface Water Treatment}, abstract ={Background: Water scarcity and increasing demand for various applications has led to more attention to the treatment and using potential resources. Surface water is one of water resources in the societies. In the present study, the performance of two coagulants, Alum and Ferric chloride, was considered to determine turbidity, color, COD, and microbial reduction in the surface waters in Tehran. Methods: Sampling was carried out from two surface waters named Sorkhehesar and Salehabad, during summer, fall, and winter. After optimization of coagulant dosage and pH, jar test experiments were conducted, and turbidity, COD, color, and microbial changes were considered. Results: Turbidity range in Sorkhehesar and Salehabad was between 91 and 500 NTU, and 35 to 400 NTU, respectively. Optimized dose of alum for summer, fall, and winter was 45, 100, and 35 mg/L, respectively, while in case of ferric chloride the optimized dose for three studied seasons was 5, 70, and 10 mg/L. Optimized dose of alum and ferric chloride in Salehabad, was determined as 28, 115, 2 and 30, 65, and 5 mg/L. Turbidity removal efficiency using both coagulants was higher than 95 percent, and color was totally removed in all experimented conditions. Conclusion: From the stand point of turbidity, color, and COD removal both alum and ferric chloride showed the same results, however, ferric chloride dose was lower than alum. In case of turbidity removal alum showed higher removal efficiency, while for COD reduction upon the conditions, e.g. seasonal variation, alum and ferric chloride performance was not the same and was varied accordingly.}, Keywords = {Coagulation, Alum, Ferric chloride, jar test, turbidity, coliform}, volume = {2}, Number = {2}, pages = {141-153}, publisher = {alborz university of medical sciences}, title_fa = {بهینه سازی فرآیند انعقاد با آلوم و کلرور فریک برای تصفیه آب‌های سطحی}, abstract_fa ={زمینه و هدف: کمبود منابع آبی کشور و افزایش تقاضا برای مصارف مختلف در سال‌های اخیر سبب شده تا تصفیه و استفاده از منابع بالقوه، مورد توجه ویژه‌ای قرار گیرد. آب‌های سطحی یکی از منابع تامین آب جوامع است. در این مطالعه، کارایی دو منعقد کننده آلوم و کلرور فریک در کاهش کدورت، رنگ، COD و عوامل میکروبی از آب‌های سطحی اطراف شهر تهران مورد مطالعه قرار گرفت. مواد و روش‌ها: نمونه‌برداری در سه فصل تابستان، پاییز و زمستان از دو آب سطحی سرخصه حصار و صالح آباد صورت گرفت. پس از تعیین دوز و pH بهینه مواد منعقد کننده، آزمایش جارتست بر روی نمونه‌ها صورت گرفته و میزان تغییر کدورت، COD، رنگ و عومل میکروبی مورد بررسی قرار گرفت. یافته‌ها: میزان کدورت آب رودخانه سرخه حصار، در محدوده 91 تا NTU 500 و کدورت رودخانه صالح آباد در محدوده 35 الی NTU 400 قرار داشت. دوز بهینه آلوم برای سه فصل تابستان، پاییز و زمستان به ترتیب برابر 45، 100 و mg/L 35 بوده، در حالی که دوز بهینه کلرور فریک برابر 5، 70 و mg/L 10 به دست آمد. دوز بهینه آلوم و کلرور فریک در رودخانه صالح آباد برای سه فصل به ترتیب برابر 28، 115، 2 و 30، 65 و mg/L 5 تعیین گردید. راندمان حذف کدورت توسط هر دو منعقد کننده در اغلب موارد، بالاتر از %95 و راندمان حذف رنگ در همه شرایط 100 بوده است. نتیجه گیری: از نظر حذف کدورت، رنگ و COD هر دو منعقد کننده کارایی مشابهی نشان دادند، با این حال دوز مصرفی کلرور فریک نسبت به آلوم کمتر بوده است. برای حذف کدورت آلوم بعنوان منعقد کننده نتایج بهتری را نشان داد، در حالی که برای حذف COD بسته به شرایط موجود (تغییرات شرایط فصلی) کارایی آلوم و کلرور فریک یکسان نبوده و تغییر پیدا می‌کرد.}, keywords_fa = {انعقاد, آلوم, کلرورفریک, جارتست, کدورت, کلیفرم}, doi = {10.18869/acadpub.jehe.2.2.141}, url = {http://jehe.abzums.ac.ir/article-1-133-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-133-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Baneshi, Mohammad Mehdi and RezaeiKalantary, Roshanak and JonidiJafari, Ahmad and Nasseri, Simin and Jafarzadeh, Nemat and Dehghanifard, Em}, title = {The Effect of Phytoremediation and Bioaugmentation on the Removal of Phenanthrene and Pyrene from Contaminated Soil}, abstract ={In this study, the efficiency of phytoremediation on soils contaminated by Phenanthrene and Pyrene as well as the impact of bioaugmentation and nonionic surfactant Tween80 on its performance was evaluated by sorghum and Onobrychis sativa. Soils collected from the pastures of Kohkiluyeh and Boyerahmad province in Iran, with concentrations of 100 and 300 mg per kg of Phenanthrene and Pyrene, which were separately and combined (9 levels) contaminated, and 1.5 kg of soil was poured in each pot in different conditions of natural, bioaugmented and surfactant separately and combined (12 cases), were a total of 108 cases, with three replications (324 pot) for 120 days were considered in a similar condition to the field. At last, the concentration of Phenanthrene and Pyrene of soil samples was measured by HPLC to determine the amount and rate of removal. Also, microbial population of soil and Rhizosphere was counted. The results showed that both plants significantly improved the removal of Phenanthrene and Pyrene from soil. Bioaugmentation and nonionic surfactant Tween80 increased the removal efficiency. In the composition of plants, bioaugmentation and the surfactant showed significant increase, so as removal of 99.4% and 98% for Onobrychis sativa, and 96.5% and 99% with sorghum were achieved for the Phenanthrene and Pyrene, respectively. The study showed that both sorghum and Onobrychis sativa had a good performance in phytoremediation of contaminated soils by Phenanthrene and Pyrene, and addition of bioaugmentation and surfactants improved the removal of Phenanthrene and Pyrene to nearly complete.}, Keywords = {Phytoremediation, bioaugmentation, Phenanthrene, Pyrene, sorghum and Onobrychis sativa, contaminated soils}, volume = {2}, Number = {2}, pages = {154-165}, publisher = {alborz university of medical sciences}, title_fa = {تأثیر گیاه پالایی و زیست افزایی بر حذف فنانترن و پایرن از خاک آلوده}, abstract_fa ={در این تحقیق، کارایی گیاه پالایی خاکهای آلوده به فنانترن و پایرن و همچنین تاثیر زیست افزایی و سورفاکتانت غیر یونی Tween80 بر کارایی آن توسط دو گیاه سورگوم و اسپرس مورد بررسی قرار گرفت. خاکهای جمع آوری شده از مراتع استان کهکیلویه و بویراحمد در ایران، با غلظت های 100 و 300 میلی گرم در کیلوگرم خاک خشک از فنانترن و پایرن به صورت مجزا و ترکیبی (9 سطح) آلوده شده، و در هر گلدان 5/1 کیلوگرم خاک ریخته شد و در حالات مختلف طبیعی، زیست افزایی و سورفاکتانت به صورت مجزا و ترکیبی (12 حالت) که مجموعا 108 حالت می گردید با سه تکرار (324 گلدان) به مدت 120روز، در شرایط مشابه فیلد قرار گرفت. در پایان، مقدار فنانترن و پایرن خاک با HPLC تعیین مقدار و درصد حذف مشخص گردید. جمعیت میکروبی خاک و ریزوسفر نیز شمارش گردید. نتایج نشان داد که هر دو گیاه به طور چشمگیری باعث بهبود حذف فنانترن و پایرن از خاک می گردند. زیست افزایی و سورفاکتانت غیریونیTween80 نیز باعث افزایش راندمان حذف گردیدند. در حالت ترکیبی گیاه، زیست افزایی و سورفاکتانت حذف به طور قابل توجهی افزایش نشان داد؛ به طوری که حذف 4/99% و 98%با اسپرس و 5/96% و 99% با سورگوم، به ترتیب برای فنانترن و پایرن به دست آمد. این تحقیق نشان داد که هر دو گیاه سورگوم و اسپرس، دارای عملکرد مناسبی در فرآیند گیاه پالایی خاکهای آلوده به فنانترن و پایرن می‌باشند و افزایش سورفاکتانت و زیست افزایی، کارایی فرآیند گیاه پالایی را تا نزدیک به حذف کامل فنانترن و پایرن از خاک، بهبود می‌دهد.}, keywords_fa = {گیاه پالایی, زیست افزایی, فنانترن, پایرن, گیاه سورگوم و اسپرس, خاک‌های آلوده}, doi = {10.18869/acadpub.jehe.2.2.154}, url = {http://jehe.abzums.ac.ir/article-1-134-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-134-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Ebrahimi, Mehdi and Farrokhi, Mehrdad and Taghavi, Kamran and ShirzadSiboni, Mehdi}, title = {Survey Removal Efficiency of Cadmium from Aqueous Solutions Using Commercial Aluminum nano oxide: Kinetic Study of the Equilibrium}, abstract ={Background: Human activities often diffuse heavy metal to the environment, which bring hazards up for human health when the concentration of these metals reaches high levels. The purpose of this study is evaluation effect of aluminum oxide Nano particles on cadmium removal from aquatic environment. Methods: This is a fundamental applied study which has been performed in order to investigation cadmium removal by using gamma aluminum nano oxide commercially prepared. In present study effects of pH, nano aluminum oxide concentration, initial concentration of cadmium, and contact time on kinetics and adsorption isotherm of cadmium by gamma Nano aluminum oxide were studied. Results: The results of experiments showed that cadmium ion had maximum adsorption over nano aluminum oxide on pH=3. Also by increasing adsorbent dose, adsorption efficiency was increased as by addition nano aluminum oxide from 0.5 g up to 4 g, the adsorption efficiency reached to 33%. By increasing cadmium initial concentration from 5 to 10 mg, removal efficiency was decreased from 29% to 25%. However the best time for adsorption was obtained at 60 minutes and the remaining time had no more effect on the removal efficiency. Data related to isotherm test for nano aluminum oxide has more conformity with Freundlich isotherm model (R2=0.9998). The results of cadmium adsorption kinetic showed that nano aluminum oxide has followed second order kinetic model (R2=0.9879). Conclusion: Nano Gamma-aluminum oxide adsorbent can introduce as an adsorbent for removal of cadmium from aquatic environment.}, Keywords = {Adsorption, Cadmium, Nano Aluminum Oxide, Al2O3}, volume = {2}, Number = {3}, pages = {166-176}, publisher = {alborz university of medical sciences}, title_fa = {بررسی کارایی حذف کادمیوم از محلول های آبی با استفاده از نانو اکسید آلومینیوم تجاری: مطالعه تعادلی سینتیکی}, abstract_fa ={زمینه و هدف: فعالیت های انسانی اغلب فلزات سنگین را در سراسر محیط زیست پراکنده می کند که خطراتی برای سلامتی انسان هنگامی که غلظت این فلزات به سطوح بالا می رسد دربر دارد. هدف از انجام این تحقیق ارزیابی تاثیر نانو ذره اکسید آلومینیوم در حذف کادمیوم از محیط آبی می باشد. مواد و روش‌ها: مطالعه مورد نظر یک مطالعه بنیادی–کاربردی است که هدف آن بررسی حذف کادمیوم با استفاده از نانو اکسید آلومینیوم گاما که بصورت تجاری تهیه شده می باشد. تأثیر متغیرهایpH ، غلظت نانو اکسید آلومینیوم، غلظت اولیه کادمیوم، زمان تماس، بر روی سینتیک و ایزوترم جذب کادمیوم بوسیله نانو اکسید آلومینیوم گاما مطالعه شد. یافته‌ها: نتایج حاصل از آزمایشات نشان می دهد که یون کادمیوم در 3pH= بیشترین جذب را بر روی نانو اکسید آلومینیوم داشت. همچنین با افزایش مقدار جاذب، راندمان جذب افزایش یافت به طوری که با افزایش نانو اکسید آلومینیوم از 5/0گرم به 4 گرم، راندمان جذب به 33% رسید. با افزایش میزان غلطت اولیه کادمیوم از 5 میلی گرم به 10 میلی گرم، کارایی حذف نیز از %29 به %25 کاهش یافت. به هر حال بهترین زمان جذب 60 دقیقه به دست آمد و زمان ماند بیش از این، تاثیر چندانی در کارایی حذف نداشت. داده های مربوط به آزمایشات ایزوترمی نانو اکسید آلومینیوم مطابقت بیشتری با مدل ایزوترمی فروندلیچ ( 9998/0=2 R) دارند. نتایج حاصل از سینتیک جذب کادمیوم نشان داد که نانو اکسید آلومینیوم، از مدل سینتیکی درجه دوم (9879/0 =2 R) پیروی کرده است. نتیجه‌گیری: نانو اکسید آلومینیوم گاما می تواند به عنوان یک جاذب در حذف کادمیوم از محیطهای آبی معرفی شود.}, keywords_fa = {جذب سطحی, کادمیوم, نانو اکسید آلومینیوم}, doi = {10.18869/acadpub.jehe.2.3.166}, url = {http://jehe.abzums.ac.ir/article-1-170-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-170-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Farzadkia, Mahdi and Azari, Hossein and Ahmadi, Ehsan and Kakavandi, Babak and Dehghanifard, Emad and Nazari, Shahram}, title = {Survey the Waste Management of Qom City in 2014}, abstract ={Background and objectives: Lack of proper management, increasing waste production and non-normative disposal of waste in addition to misspend the national capital, cause loss of precious natural resources. To address this problem we need a coherent and dynamic management program. The goal of this project is to reduce environmental pollution, cost saving, promoting citizen participation, revenue and reduce land loss. Methods: In this study, check lists, interviews and field report were used to collect data at period of one year. To determine the waste components, sampling technique was used then sampling data was imported into Excel software and was analyzed. Results: At the beginning of the project, the average per capita of generated waste was 580 g/day and at the end of the project will 660 g/day. The waste materials determined as %66.8 putrescible, %4.3 paper and cardboard, %7.2 plastic, %2.3 glass, %2 textiles, %0.2 metals, %1.6 wood, and also, hospital waste was equal to 4400 Kg. According to estimates made annual cost of solid waste management services per capita in Qom is 70 Rial and the cost of collection, transportation, separation and disposal of garbage for every Kilogram per day is 280 Rial. Conclusion: Amount of waste per capita in Qom was less than of Tehran, Delijan and Mallayer cities, and more than Esfahan and Kashan cities. Hospital waste was desirable as compared to the average of Iran.}, Keywords = {Waste Management, Qualitative and Quantitative Analysis, Solid Waste, Qom City}, volume = {2}, Number = {3}, pages = {177-185}, publisher = {alborz university of medical sciences}, title_fa = {بررسی وضعیت مدیریت پسماند شهر قم در سال1390}, abstract_fa ={زمینه و هدف: عدم مدیریت صحیح، افزایش تولید پسماند و دفع غیر اصولی آن علاوه بر هدر دادن سرمایه ملی، موجب نابودی منابع طبیعی نیز می شود. برای رفع این مشکل نیازمند یک برنامه مدیریتی منسجم و پویا هستیم تا از خسارات احتمالی جلوگیری به عمل آوریم. هدف از اجرای این طرح کاهش آلودگی محیطی، ارتقاء مشارکت شهروندان، درآمد زایی و کاهش اتلاف زمین می باشد. مواد و روش‌ها: در این مطالعه از چک لیست ها و مشاهده میدانی در بازه زمانی 1 ساله برای جمع آوری اطلاعات استفاده شد. چک لیست های تهیه شده دارای 33 سوال می باشد که بر اساس استاندادهای ایران تهیه شده است. برای تعیین اجزای تشکیل دهنده پسماند نیز از روش نمونه برداری استفاده شده است، اطلاعات مربوط به نمونه برداری ها وارد نرم افزار Excel گردیده و مورد تجزیه و تحلیل قرارگرفتند. یافته‌ها: متوسط سرانه تولید پسماند در ابتدای طرح g/day 580 بوده و در انتهای طرح بهg/day 660 می رسد. میزان مواد موجود در پسماند شامل مواد فساد پذیر 8/66 %، کاغذ و مقوا 3/4 %، پلاستیک2/7 %، شیشه3/2 %، منسوجات2 %، فلزات 2/0 %، چوب 6/1 % تعیین شد و همچنین میزان پسماندهای بیمارستان برابر4400 کیلوگرم می باشد. طبق برآورد‌های انجام شده هزینه سرانه خدمات مدیریت پسماند به ازاء هر نفر در قم سالانه 70 ریال و هزینه جمع‌آوری، انتقال، تفکیک و دفن هر کیلوگرم پسماند نیز روزانه 280 ریال برآورد شد. نتیجه‌گیری: مقدار سرانه پسماند قم از شهرهای تهران، دلیجان و ملایر کمتر و نسبت به شهر های اصفهان و کاشان بیشتر می‌باشد. پسماندهای بیمارستانی نیز نسبت به میانگین ایران در حد مطلوبی قرار دارد.}, keywords_fa = {مدیریت پسماند, آنالیز کمی وکیفی, مواد زاید جامد, شهر قم}, doi = {10.18869/acadpub.jehe.2.3.177}, url = {http://jehe.abzums.ac.ir/article-1-171-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-171-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {RayganShirazinezhad, Alireza and Zare, Morteza and Zare, Fahime and Baneshi, Mohammad Mehdi and Rezaei, Soheil}, title = {Application of Statistical Model in Wastewater Treatment Process Modeling Using Data Analysis}, abstract ={Background: Wastewater treatment includes very complex and interrelated physical, chemical and biological processes which using data analysis techniques can be rigorously modeled by a non-complex mathematical calculation models. Materials and Methods: In this study, data on wastewater treatment processes from water and wastewater company of Kohgiluyeh and Boyer Ahmad were used. A total of 3306 data for COD, TSS, PH and turbidity were collected, then analyzed by SPSS-16 software (descriptive statistics) and data analysis IBM SPSS Modeler 14.2, through 9 algorithm. Results: According to the results on logistic regression algorithms, neural networks, Bayesian networks, discriminant analysis, decision tree C5, tree C & R, CHAID, QUEST and SVM had accuracy precision of 90.16, 94.17, 81.37, 70.48, 97.89, 96.56, 96.46, 96.84 and 88.92, respectively. Discussion and conclusion: The C5 algorithm as the best and most applicable algorithms for modeling of wastewater treatment processes were chosen carefully with accuracy of 97.899 and the most influential variables in this model were PH, COD, TSS and turbidity.}, Keywords = {Wastewater Treatment Process Modeling, Data Analyzing, Classification, Kohgiluyeh and Boyer Ahmad}, volume = {2}, Number = {3}, pages = {186-194}, publisher = {alborz university of medical sciences}, title_fa = {بررسی مدل‌های آماری در مدل‌سازی فرآیند تصفیه فاضلاب با استفاده از روش داده کاوی}, abstract_fa ={زمینه و هدف: تصفیه فاضلاب شامل فرآیندهای فیزیکی، شیمیایی و بیولوژیکی بسیار پیچیده و وابسته به هم می باشد، با استفاده از روش های داده کاوی می توان با دقت زیاد و بوسیله مدل های بدون محاسبات پیچیده ریاضی  فرآیندهای تصفیه فاضلاب را مدلسازی کرد. مواد و روش‌ها: در این پژوهش از داده های مربوط به فرآیندهای تصفیه فاضلاب موجود در شرکت آب و فاضلاب استان کهگیلویه و بویر احمد استفاده گردید. در مجموع 3306 داده مربوط به COD، TSS،  PHو کدورت جمع آوری گردید. در نهایت داده های گردآوری شده با استفاده از نرم افزار های تحلیل آماری SPSS-16 (آمارتوصیفی) و داده کاوی Ibm Spss Modeler 14.2 و از طریق 9 الگوریتم مورد تجزیه و تحلیل قرار گرفتند. نتایج: با توجه به نتایج بدست آمده بر روی الگوریتم های رگرسیون لجستیکی، شبکه عصبی، شبکه بیزی، تحلیل تفکیکی، درخت تصمیم C5، درخت C&R ، CHAID، QUESTو SVM به ترتیب دارای درصد دقت درستی 16/90، 17/94 ، 37/81 ، 48/70 ، 89/97 ، 56/96 ، 46/96 ، 84/96 ، 92/88 بودند. بحث ونتیجه‌گیری: در این مطالعه، الگوریتم C5 به عنوان بهترین و کارآمدترین الگوریتم در جهت مدلسازی فرآیندهای تصفیه فاضلاب با دقت 899/97 درصد انتخاب گردید و موثرترین متغیر ها در این مدل به ترتیب PH، COD، TSS و کدورت بودند.}, keywords_fa = {مدلسازی فرآیند تصفیه فاضلاب, داده کاوی, دسته بندی, کهگیلویه و بویر احمد}, doi = {10.18869/acadpub.jehe.2.3.186}, url = {http://jehe.abzums.ac.ir/article-1-172-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-172-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Rahmani, Ali Reza and Samadi, Mohammad Taghi and Shokoohi, Reza and ZolghadrNasab, Hass}, title = {Investigation of Heterognous Fenton with nZVI Perfomance in Dimethylphthalate Removal from Aqueous Solutions}, abstract ={Background and purpose: Stability of new synthetic compounds such as Dimethyl phthalate increased their concentration in the environment and food chain and caused health risks. Therefore, achieve effective and efficient methods to removal of pollutants are one of the environmental researchers concern. This study investigates efficiency of heterognous Fenton process using  nZVI in dimethylphthalate removal from aqueous solutions. Materials and Methods: This experimental study was conducted in batch reactor in laboratory scale and the efficiency of heterognous Fenton process was analyzed in a batch system with the effect of changes in operating parameters such as reaction time (15 to 120 min), pH (2 to10), H2O2 concentration (0.01 to 1 mmol/L), nZVI dose (0.01 to 0.5 mg/L) and initial concentration of Dimethyl phthalate (2 – 50 mg /L). Then the effect of each heterogeneous Fenton regent in dimethyl phthalateremoval was determined. Results: The results showed that the maximum efficiency of heterognous Fenton process in removal of Dimethyl phthalate is at pH=4. Also in optimal conditions, the parameters affecting reaction was determined  as H2O2 concentration 0.1 mmol/L, nZVI dose 0.05 gr/L, Dimethyl phthalate concentration 2 mg/L and 120 minute, amount of Dimethyl phthalate removal was 92.8%. Conclusion: According to the results, heterognous Fenton process using  nZVI has an optimal efficiency in removal of Dimethyl phthalate from aquatic solutions and can be considered as an acceptable and low Cost method for the removal of similar compounds.}, Keywords = {Dimethyl phthalate, Heterogeneous Fenton, Nanoscale zero-valent iron, Aqueous solutions}, volume = {2}, Number = {3}, pages = {195-197}, publisher = {alborz university of medical sciences}, title_fa = {بررسی کارایی فرآیند فنتون هتروژن با نانوذرات آهن صفردر حذف دی‌متیل‌فتالات از محیط‌های آبی}, abstract_fa ={مقدمه و هدف: ثبات و پایداری ترکیبات مصنوعی نوظهوری همچون دی­متیل­ فتالات موجب افزایش روزافزون غلظت آنها در محیط زیست و چرخه مواد غذایی و ایجاد مخاطرات بهداشتی شده است. بنابراین دستیابی به روش­های مؤثر و کارآمد جهت حذف این آلاینده­ها از دغدغه­های محققین محیط زیست می­باشد. این پژوهش با هدف بررسی کارایی فرآیند فنتون هتروژن با نانوذرات آهن صفر در حذف دی­متیل­ فتالات از محیط­های آبی انجام شده است. مواد و روش­ها: مطالعه تجربی حاضر در مقیاس آزمایشگاهی، در راکتور با جریان منقطع انجام شد و کارایی فرآیند فنتون هتروژن با بررسی تأثیرتغییرات پارامترهای عملیاتی زمان واکنش (5 تا 120 دقیقه)، pH (2 تا10)، غلظت پراکسید هیدروژن (01/0 تا 1 میلی­مول بر لیتر)، میزان نانوذرات آهن صفر (01/0 تا 5/0 گرم بر لیتر) و غلظت اولیه دی­متیل فتالات (2 تا 50 میلی­گرم بر لیتر) مورد مطالعه قرار گرفت. سپس تأثیر هر یک از عوامل فنتون هتروژن در حذف دی­متیل فتالات تعیین شد. یافته­ها: نتایج حاصل نشان داد بیشترین کارایی فرآیند فنتون هتروژن در حذف دی­متیل فتالات در 4pH= می­باشد. همچنین در شرایط بهینه پارامترهای مؤثر بر واکنش شامل غلظت پراکسید هیدروژن 1/0 میلی­مول بر لیتر، مقدار نانوذرات آهن صفر 05/0 گرم بر لیتر، غلظت اولیه 2 میلی­گرم بر لیتر آلاینده و زمان تماس 60 دقیقه، میزان حذف دی‌متیل فتالات برابر 8/92 درصد تعیین شد.  نتیجه­گیری: براساس نتایج حاصل شده، فرآیند فنتون هتروژن با نانوذرات آهن صفر، کارایی مطلوبی در حذف دی­متیل فتالات از محیط­های آبی دارد و می­تواند به عنوان یک روش مؤثر و کم هزینه در حذف ترکیبات مشابه مد نظر قرار گیرد.}, keywords_fa = {دی متیل‌فتالات, فنتون هتروژن, نانوذرات آهن صفر, محیط‌های آبی}, doi = {10.18869/acadpub.jehe.2.3.195}, url = {http://jehe.abzums.ac.ir/article-1-173-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-173-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Salari, Mehdi and Changani, Fazlollah and DarvishMotevali, Mohamad and Akbari, Saee}, title = {Evaluation of the Removal of 2،4 Dichlorophenol by Chitosan from Aqueous Solutions}, abstract ={Background: 2،4 dichlorophenol (DCP), one of the most chlorophenol compounds family with highly toxic effect, exists in agricultural areas, chlorinated waters, discharging wastewater of pulp industries and paper factories. Chlorophenols can cause damages to the kidneys, liver, pancreas and weaken the central nervous system (CNS). In the current study we would evaluate the adsorption of DCP by chitosan in aqueous environments. Materials and Methods: In this study we evaluated the effect of operational parameters such as time (15-90min), pH values (3-9), initial concentration of DCP(15-100mg/l)and the dose of chitosan (0.1-0.9g) in a batch reactor. A spectrophotometer at wavelength of 280nm was used to measure the concentration of DCP. Freundlich and Langmuir isotherm models and Pseudo-first order kinetic models and Pseudo-second-order kinetic was drawn by using of the results obtained in the absorption process. Results: Equilibrium time in the adsorbtion process was estimated to be 75 minutes (DCP Concentration- 15mg/l, Chitosan Concentration – 0.5g and pH- 6.5) with 76% removal efficiency. PH=3 was calculated as the optimal PH in absorption process (DCP Concentration- 15mg/l, Chitosan Concentration- 0.5g and Time Equilibrium-75 min) with efficiency 79% and the value of efficiency decreased by increasing PH. In 15 mg/l concentration of DCP maximum adsorption with an efficiency of 79% was observed. (Chitosan Concentration – 0.5g, Time Equilibrium -75 min and pH-3) and the maximum 87% adsorption efficiency of DCP was observed at the 0.08mg/l absorbent dose of chitosan. (DCP Concentration - 15mg/l, time equilibrium-75 min and pH=3). Adsorption process follows of Freundlich isotherm with correlation coefficient of 0.9599 and the pseudo second order kinetic model with correlation coefficient of 0.9649. Conclusion: According to results of the study, chitosan can be used to remove of DCP from industrial wastewater due to of its perfect characteristics such as biodegradability, resurgent ability, low cost and adsorption acceptable efficiency.}, Keywords = {2,4 dichlorophenol, Chitosan, Industrial Wastewater, Absorption process}, volume = {2}, Number = {3}, pages = {198-210}, publisher = {alborz university of medical sciences}, title_fa = {بررسی حذف 2و4 دی کلروفنل (DCP) با استفاده از کیتوزان از محیط های آبی}, abstract_fa ={زمینه و هدف: 2و4 دی کلروفنل (DCP) یکی از ترکیبات بسیار سمی کلروفنل ها می باشد که در مناطق کشاورزی، آب ضدعفونی شده توسط کلر، فاضلاب خروجی صنایع خمیر کاغذ و کارخانه های کاغذ دیده می شود. کلروفنل ها باعث آسیب بر روی کلیه ها، کبد، پانکراس و تضعیف سیستم اعصاب مرکزی می شود. در این مطالعه به بررسی جذب DCP توسط کیتوزان در محیط های آبی خواهیم پرداخت. روش بررسی: در این مطالعه پارامترهای زمان جذب (min100- 15)، pH (9-3)، غلظت های اولیهDCP (mg/l100- 15) و دوز جاذب کیتوزان (g9/0-1/0) در راکتور ناپیوسته مورد بررسی قرار گرفت و برای سنجش غلظت DCP از دستگاه اسپکتروفتومتری در طول موج nm280 استفاده گردید. با استفاده از نتایج بدست آمده در فرآیند جذب، مدل های ایزوترمی فروندلیخ، لانگمویر و مدل های سینتیکی شبه درجه اول و دوم بررسی شد. یافته ها: زمان تعادل در فرآیند جذب 75 دقیقه (5/6=pH، mg/l15- غلظتDCP و g5/0- غلظت کیتوزان) با 76% حذف بدست آمد. 3=pH بعنوان pH بهینه در فرآیند جذب (mg/l15- غلظتDCP، g5/0- غلظت کیتوزان و min75- زمان تعادل) با راندمان 79% بدست آمد و با افزایش pH راندمان کاهش یافت. درغلظت mg/l15 از DCP (3=pH، g 5/0- غلظت کیتوزان و min75- زمان تعادل) بیشترین حذف با راندمان 79% مشاهده گردید و دوز g8/0جاذب کیتوزان (3= pH، mg/l15- غلظت DCP و min75- زمان تعادل) با راندمان 87% بیشترین حذف DCP را بهمراه داشت. فرآیند جذب از ایزوترم فروندلیخ با ضریب همبستگی 9599/0 و از مدل سینتیکی شبه درجه دوم با ضریب همبستگی 9649/ 0پیروی می کند. نتیجه گیری: با استناد به نتایج مطالعه انجام شده، می توان از کیتوزان بدلیل ویژگی هایی از جمله تجزیه پذیری، قابلیت احیا مجدد، ارزان قیمت بودن و راندمان قابل قبول در جذب، برای حذف DCP از فاضلاب صنایع استفاده نمود.}, keywords_fa = {2و4 دی کلروفنل, کیتوزان, فاضلاب صنایع, فرآیند جذب}, doi = {10.18869/acadpub.jehe.2.3.198}, url = {http://jehe.abzums.ac.ir/article-1-174-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-174-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Farzadkia, Mahdi and FallahJokandan, Sevda and YeganeBadi, Mojtab}, title = {Compost Management in Iran: Opportunities and Challenges}, abstract ={Background: According to report of the World Food and Agriculture Organization (FAO), between 33 to 60 percent increase in agricultural production in the world due to the use of chemical fertilizers. Negative effects of fertilizers on the environment and health of living organisms, especially humans, has encountered the country whit challenges such as increasing the number of cancer. Therefore, it is necessary to replace chemical fertilizers whit biofertilizers such as compost. Compost Causes increases in productivity and controls soil erosion. Methods: In order to achieve the objectives of the research, literature review was conducted and to investigate the status of chemical fertilizers and compost in Iran and developed countries through internal and external databases, documents were collected. Results: Use of fertilizers in Europe forecasted to decline 16 million tons in 2030, while in the Iran, rate of fertilizer forecast increases to 6700 thousand tons in 2020. Total supply of compost in the country is 164 thousand tons in 2009 and will be to 590 thousand tons in 2016. The total demand is 472 thousand tons in 2009 and will be to 661 thousand tons in 2016. This indicates that there is 71 thousand tons deficiency in the supply until 2016. Conclusion: Use more of compost in the country, need to a multi-faceted management issue that Ministries, municipalities and recycle of organizations must be working together. Therefore necessary awareness aboute the adverse effects of indiscriminate use of fertilizers and also promote the use compost, in addition to reducing the use of chemical fertilizers, will be cause more demand for consumption of compost.}, Keywords = {Compost, Fertilizer, Waste Management, Iran}, volume = {2}, Number = {3}, pages = {211-223}, publisher = {alborz university of medical sciences}, title_fa = {مدیریت کمپوست در ایران: فرصت‌ها و چالش‌ها}, abstract_fa ={زمینه و هدف: بنا به گزارش سازمان خواروبار جهانی، بین 33 تا 60 درصد افزایش تولیدات کشاورزی در جهان مرهون مصرف کود‌های شیمیایی بوده ‌است. اثرات منفی کود‌‌های شیمیایی بر محیط زیست و سلامت موجودات زنده به ویژه انسان، کشور را با چالش‌هایی نظیر افزایش آمار سرطان مواجه کرده ‌است. بنابراین جایگزینی کود‌‌های شیمیایی با کمپوست ضروری می‌باشد. کمپوست باعث افزایش بازدهی محصول و کنترل فرسایش خاک می‌گردد. مواد و روش‌ها: به‌منظور دستیابی به اهداف تحقیق، مطالعات کتابخانه‌ای انجام شد و جهت بررسی وضعیت کود‌های شیمیایی و کمپوست در ایران و کشور‌های پیشرفته جهان، مطالبی از طریق پایگاه‌های معتبر داخلی و خارجی جمع‌آوری گردید. یافته‌ها: پیش‌بینی می‌شود مصرف کود‌های شیمیایی در اروپا تا سال 2030 تا 16 میلیون تن کاهش یابد. درحالی‌که طبق پیش‌بینی‌ها در ایران تا سال 2020 به 6700 هزار تن افزایش می‌یابد. کل عرضه کمپوست در کشور در سال 88، 164 هزار تن و تا سال 95 به 590 هزار تن و کل تقاضا در کشور در سال 88، 472 هزار تن و تا سال 95،661 هزار تن خواهد‌ بود. این امر نشان می‌دهد که 71 هزار تن کمبود در عرضه کمپوست تا سال 95 وجود‌ دارد. نتیجه‌گیری: استفاده بیشتر کمپوست در کشور منوط به مدیریت چند وجهی این موضوع دارد که باید وزارت خانه‌ها، شهرداری‌ها و سازمان بازیافت با هم همکاری لازم را داشته ‌باشند. با دادن آگاهی‌های لازم در رابطه با اثرات سوء مصرف بی رویه کود‌های شیمیایی و همچنین ترویج مصرف کود کمپوست علاوه بر کاهش مصرف کود شیمیایی، موجب تقاضای بیشتر برای مصرف کود کمپوست خواهد شد.}, keywords_fa = {کمپوست, کود شیمیایی, مدیریت پسماند, ایران}, doi = {10.18869/acadpub.jehe.2.3.211}, url = {http://jehe.abzums.ac.ir/article-1-175-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-175-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Balarak, Davoud and Bazrafshan, Edris and KordMostafapour, Ferdos}, title = {Investigation of Pb(II) Removal from Synthetic Wastewater by Using Azolla Filiculoides Biomass}, abstract ={Background and Aim: Discharge of industrial wastewater containing Pb into the environment can have harmful effects in the live organisms. Therefore, Pb must be removed from polluted water using an effective method before being discharged into the environment. The purpose of the present study was to examine Pb removal using alga Azolla biomass. Materials and Methods: In this experimental study, removal of Pb(II) was performed using Azolla biomass considering changes in time, pH, adsorbent dose, initial concentration of Pb and mixing speed. Experiments were performed in batch reactor in flasks on Shaker. , Atomic absorption spectrophotometry was used for Pb determination. All experiments were conducted in triplicate and the mean removal percent was reported. Finally, biosorption kinetic and equilibrium isotherms of adsorbent was investigated. Results: It was found that the higher removal efficiency of Pb occurred in pH 6 and aoptimum dsorbent dose 7 g/L. With increase in the initial concentration of Pb, removal efficincy decreased and with increasing of contact time and mixing speed,efficincy increased. Data also showed that the Langmuir isotherm and pseudo second-order kinetic are compliance. Conclusion: Azolla biomass is an efficient and low-cost adsorbent for removing of Pb (II) from water and wastewater.}, Keywords = {Synthetic Wastewater, Isotherm Adsorption, Pb (II), Azolla biomass}, volume = {2}, Number = {3}, pages = {224-237}, publisher = {alborz university of medical sciences}, title_fa = {بررسی حذف سرب (II) با استفاده از بیومس آزولا فیلیکولیدس از فاضلاب سنتتیک}, abstract_fa ={زمینه و هدف: تخلیه پساب صنایع حاوی سرب به داخل محیط می‌تواند اثرات مضری را برای انواع موجودات زنده به همراه داشته باشد، بنابراین سرب باید با یک روش مؤثر قبل از تخلیه به محیط از آب­های آلوده حذف گردد. هدف از این مطالعه، بررسی حذف سرب با استفاده از بیومس آزولا بوده است. روش بررسی: در این مطالعه تجربی، حذف سرب با استفاده از بیومس آزولا، با تغییر در زمان تماس،pH ، دوز جاذب، غلظت اولیه سرب و سرعت اختلاط انجام گردید. آزمایش‌ها به صورت ناپیوسته در فلاکس­هایی بر روی شیکر انجام گرفت. برای سنجش غلظت باقیمانده سرب از دستگاه جذب اتمی استفاده شد. آزمایشات به صورت سه بار تکرار و میانگین درصد حذف ارائه شد. در نهایت، سینتیک جذب و ایزوترم­های تعادلی ماده جاذب مورد بررسی قرار گرفت. یافته‌ها: بیشترین میزان حذف سرب در pH برابر با 6 و دوز بهینه جاذب 7 گرم در لیتر به دست آمد. با افزایش غلظت اولیه سرب، راندمان حذف کاهش می‌یابد و با افزایش زمان تماس و سرعت اختلاط، راندمان افزایش می‌یابد. نتایج نشان داد که داده‌های حاصل، از ایزوترم جذب لانگمیر و سینتیک درجه دو کاذب تبعیت می‌کند. نتیجه‌گیری: بیومس آزولا، یک جاذب کارآمد و کم هزینه برای حذف سرب  از آب و فاضلاب است.}, keywords_fa = {فاضلاب سینتیک, ایزوترم جذب, سرب, بیومس آزولا}, doi = {10.18869/acadpub.jehe.2.3.224}, url = {http://jehe.abzums.ac.ir/article-1-176-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-176-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Khodadadi, Maryam and Mahvi, Amir Hossein and Vazieni, Hossien and Khosravi, Rasoul and Dorri, Hadigheh and Saghi, Mohammad Hossie}, title = {Investigation of Fluoride Removal Efficiency from Aqueous Solution by Pistachio and Almonds Crust}, abstract ={Introduction: Fluoride and its compounds are widely used in industries and then through effluent are released into the environment. The purpose of this study was to evaluate Efficiency of low cost adsorbents (pistachios coal) in the removal of fluoride from aqueous solutions.  Methods: For the preparation of adsorbent, crust of pistachios deride, then washed with distilled water, then powder in the furnace for burning for 2 hours at temperatures of 500, 600, and 700 °C. The effect of changing pH, burning temperature of adsorbent, stirring speed, initial concentration of fluoride, retention time and adsorbent dose was studied. Concentration of fluoride measured according to standard method using spectrophotometer the data were analyzed using Excel software. Results: The results of these experiments showed that the burning adsorbent, temperature 500 ° C, PH of solution in the neutral range (pH = 7), adsorbent dose of 2 g/L for absorbing almonds and adsorbent dose of 3 g pistachio, contact time of 40 minutes for both adsorbent, initial fluoride concentration (5ppm) for both absorbent without mixing, the optimal conditions for the efficiency of the absorber is as much as 90-80 percent. Discussion: According to the results, pistachio coal can be used with high efficiency for fluoride removal. }, Keywords = {Pistachio coal, Fluoride, Aquatic environments, Adsorbent}, volume = {2}, Number = {3}, pages = {238-248}, publisher = {alborz university of medical sciences}, title_fa = {بررسی کارآیی کربن حاصل از پوست پسته در حذف فلوراید از محیط‌های آبی}, abstract_fa ={زمینه و هدف: فلوراید و ترکیبات آن به شکل گسترده ای در صنایع مورد استفاده قرار می گیرد که از طریق پساب به محیط زیست منتشر می شود. .هدف از این تحقیق بررسی کارایی استفاده از جاذب های ارزان قیمت در حذف فلوراید از محیط های آبی حاوی فلوراید می باشد. روش کار: پودر حاصل از پوست پسته را در داخل بوته چینی به درون کوره انتقال داده و به مدت 2 ساعت در دمای 500،600 و700 درجه سانتی گراد سوزانده می شود. اثر متغیر های pH، دمای سوزاندن جاذب، سرعت هم زدن، غلظت اولیه فلوئور، مدت زمان تماس و دوز جاذب مورد بررسی قرار گرفت.ا ندازه گیری غلظت اولیه فلوئور و غلظت باقیمانده بر اساس استاندارد متد و با کمک دستگاه اسپکتروفتومتری انجام گرفت و در نهایت تجزیه و تحلیل داده ها با استفاده از نرم افزار EXCEL صورت گرفت. یافته ها: نتایج حاصل از این آزمایشات نشان داد که سوزاندن جاذب ها(زغال پوسته پسته) دردمای500 درجه سانتی گراد، تنظیم PH محلول در محدوده خنثی(pH=) ،دوز جاذب g/L2 برای جاذب بادام و دوز جاذب 3 گرم در لیتربرای جاذب پسته ، زمان تماس 40 دقیقه برای جاذب، غلظت اولیه فلوراید ppm5 راندمان حذفی به میزان 90-80 درصد را دارا می باشد. نتیجه‌گیری: بر مبنای نتایج حاصل از این مطالعه می توان اظهار نمود که زغال پوست پسته و بادام یک روش کارآمد و با راندمان نسبتا بالا برای حذف فلوراید از محیط های آبی است.}, keywords_fa = {زغال پوست پسته , فلوراید, محیط های آبی, جذب}, doi = {10.18869/acadpub.jehe.2.3.238}, url = {http://jehe.abzums.ac.ir/article-1-177-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-177-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Mahvi, Amir Hossein and Moradi, Mahbobeh and Moradi, Bigard and Fakhri, Yadolah}, title = {Determination of Radon-222 and Thoron Concentration in Decorative Stone Warehouses Indoor Air and the Received Effective Dose by Staff}, abstract ={Background: Radon is a colorless, odorless, and radioactive gas that can be emitted from decorative stones such as granite, marble, etc. Inhaling radon gas in a long period may cause for incidence of lung cancer among peoples. Material and Methods: In this cross-sectional descriptive study, Radon 222 and Thoron concentrations in background and indoor air were measured in four decorative stones warehouse using portable radon meter(RTM1688-2 model). Totally, 24 samples of 24- hours concentrations in indoor air and 24 samples of 4-hours concentrations of Radon 222 and thoron in the background air at three stages were measured. Then, received effective dose of Radon 222 and Thoron was calculated by UNSCEAR equations. Results: The mean radon concentrations for indoor and background air were 74±37 and 34±16 Bq/m3, respectively. The mean radon concentrations for indoor air in decorative stones warehouses for DSW1, DSW2, DSW3 and DSW4 were 72.50±34, 98.25±43, 34.42±18 and 88.92±51 Bq/m3, respectively. The received effective dose mean of Radon 222 and Thoron by the staff at 8 working hours was 0.53±0.18 and 0.05±0.03 mSv/y and in 16 working hours was 1.05±0.36 and 0.11±0.07 mSv/y, respectively. Generally, the mean received effective dose by staff from Radon at 8 and 16 working hours was 0.58±0.2  and 1.16±0.41 mSv/y, respectively. Conclusions: Radon concentration mean in indoor air and the received effective dose mean by staff was lower than the standards level. Decorative stone warehouses were the resources for accumulation of Radon gas that can be reduced by corrective actions.}, Keywords = {Decorative stone warehouses, Effective dose, Radon-222, Thoron}, volume = {2}, Number = {4}, pages = {249-258}, publisher = {alborz university of medical sciences}, title_fa = {تعیین غلظت رادن 222 و تورن هوای داخلی انبارهای سنگ های زینتی و دز موثر دریافتی کارگران}, abstract_fa ={زمینه و هدف: رادن یک گاز بی رنگ، بی بو و رادیو اکتیو است که می تواند از سنگ های زینتی مانند گرانیت، مرمر و غیره منتشر گردد. استنشاق گاز رادن در طولانی مدت می تواند باعث بروز سرطان ریه در انسان شود. مواد و روش‌ها : در این مطالعه مقطعی توصیفی در سه مرحله، غلظت رادن222 و تورن هوای داخلی و زمینه، در 4 انبار نگهداری سنگهای زینتی توسط دستگاه رادن سنج پرتابل 2-1688RTM مورد اندازه گیری قرار گرفت. در مجموع سه مرحله، 24 غلظت 24ساعته هوای داخلی و 24 غلظت 4 ساعته رادن 222 و تورن هوای زمینه مورد اندازه گیری قرار گرفت. سپس دز موثر دریافتی توسط معادلات UNSCEAR محاسبه شد. یافته ها: میانگین غلظت رادن 222 هوای داخلی و زمینه به ترتیب 37±74 و 3Bq/m 16±34 است. میانگین غلظت رادن هوای داخلی در انبارهای سنگ های زینتی DSW1، DSW2، DSW3 و DSW4 به ترتیب 34±5/74، 43±25/98، 18±42/34 و 3Bq/m 51±92/88 است. دز موثر دریافتی کارگران ناشی از رادن222 و تورن در 8 ساعت کاری به ترتیب 18/0±53/0 و mSv/y 03/0±05/0 و در 16 ساعت کاری 36/0±05/1 و mSv/y 07±11/0 است. به طور کلی میانگین دز موثر دریافتی کارکنان ناشی از رادن 222 در 8 و 16 ساعت کاری به ترتیب 2/0±58/0 و mSv/y 41/0±16/1 بود.   نتیجه گیری: میانگین غلظت رادن هوای داخلی و دز موثر دریافتی کارگران کمتر از استاندارد است. انبارهای سنگ های زینتی از منابع تجمع گاز رادن می باشند که می توان با انجام اقدامات اصلاحی، غلظت رادن هوای داخلی را کاهش داد. }, keywords_fa = {رادن 222, تورن, دز موثر, انبارهای سنگ های زینتی}, doi = {10.18869/acadpub.jehe.2.4.249}, url = {http://jehe.abzums.ac.ir/article-1-255-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-255-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Rahmani, Ali Reza and Samadi, Mohammad Taghi and Shokoohi, Reza and ZolghadrNasab, Hass}, title = {Application of Heterognous Fenton Process Using Zero-Valent Iron Nanoparticles in Dimethylphthalate Removal from Aqueous Solutions}, abstract ={Background and purpose: Stability and sustainable [s1] of emerging synthetic compounds such as Dimethyl phthalate lead to increasing their concentrations in environment and food chain and health risks. Therefore, researchers are concern to achieve effective and efficient methods for removal these pollutions. This aim of this study was to evaluation of the efficiency of heterognous Fenton using Zero-valent iron nanoparticles in dimethylphthalate removal from aqueous solutions. Materials and Methods: This experimental study was conducted in laboratory scale in batch reactor. The effects of operational parameters such as reaction time (15 to 120 min), pH (2 to10), H2O2 concentrations (0.01 to 1 mmol/L), nZVI dose (0.01 to 0.5 mg/L) and initial concentrations of Dimethyl phthalate (2 – 50 mg /L) determined by one at a time method. Then effect of each heterogeneous Fenton regent was determined in dimethyl phthalate removal. Results: The results showed that maximum efficiency of heterognous Fenton process in dimethylphthalate removal occur at pH=4. Also at H2O2 concentration 0.1 mmol/L, nZVI dose 0.05 g/L, Dimethyl phthalate concentration 2 mg/L and reaction time 120 minute, amount of Dimethyl phthalate removal was 92.8%. Conclusion: According to the results, nZVI- heterognous Fenton process has appropriate efficiency in Dimethyl phthalate removal from aquatic solutions and can be assumed as an effective and applied method for removal similar compounds from industrial wastewater.}, Keywords = {Dimethyl phthalate, heterogeneous Fenton, zero-valent iron Nanoparticles, aqueous solutions}, volume = {2}, Number = {4}, pages = {259-269}, publisher = {alborz university of medical sciences}, title_fa = {کاربرد فرآیند فنتون هتروژن با نانوذرات آهن صفر در حذف دی‌متیل‌فتالات از محیط‌های آبی}, abstract_fa ={مقدمه و هدف: ثبات و پایداری ترکیبات مصنوعی نوظهوری همچون دی­متیل­فتالات، موجب افزایش روزافزون غلظت آنها در محیط زیست و چرخه غذایی و ایجاد مخاطرات بهداشتی شده است. بنابراین دستیابی به روش­های مؤثر و کارآمد جهت حذف این آلاینده­ ها، از دغدغه­های محققین می­باشد. این پژوهش با هدف بررسی کارایی فرآیند فنتون هتروژن با نانوذرات آهن صفر در حذف دی­متیل­فتالات از محیط­های آبی انجام شده است. مواد و روش­ها: مطالعه تجربی حاضر در مقیاس آزمایشگاهی، در راکتور با جریان منقطع انجام شد. تأثیر تغییرات پارامترهای عملیاتی همچون زمان واکنش (5 تا 120 دقیقه)، pH (2 تا10)، غلظت پراکسید هیدروژن (01/0 تا 1 میلی­مول بر لیتر)، دز نانوذرات آهن صفر (01/0 تا 5/0 گرم بر لیتر) و غلظت اولیه دی­متیل فتالات (2 تا 50 میلی­گرم بر لیتر) به صورت یک متغیر در هر لحظه (One at a time) بررسی شد. سپس تأثیر هریک از عوامل فنتون هتروژن در حذف دی­متیل فتالات تعیین شد. یافته­ها: نتایج حاصل نشان داد بیشترین کارایی فرآیند فنتون هتروژن در حذف دی­متیل فتالات در 4pH= می­باشد. همچنین در غلظت پراکسید هیدروژن 1/0 میلی­مول بر لیتر، دز نانوذرات آهن صفر 05/0 گرم بر لیتر، غلظت اولیه 2 میلی­گرم بر لیتر آلاینده و زمان واکنش 60 دقیقه، میزان حذف دی­متیل فتالات برابر 8/92 درصد تعیین شد. نتیجه­ گیری: براساس نتایج حاصل فرآیند فنتون هتروژن با نانوذرات آهن صفر کارایی مطلوبی در حذف دی­متیل فتالات از محیط­های آبی داشته و می­تواند به عنوان یک روش مؤثر و کاربردی در حذف ترکیبات مشابه از فاضلاب‌های صتعتی مد نظر باشد. }, keywords_fa = {دی متیل‌فتالات, فنتون هتروژن, نانوذرات آهن صفر, محیط‌های آبی}, doi = {10.18869/acadpub.jehe.2.4.259}, url = {http://jehe.abzums.ac.ir/article-1-188-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-188-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Hassanpour, Mehri and Khezri, Mostafa and Dehghanifard, Em}, title = {Evaluation of Nano-Magnet Chitosan Performance in Nitrate Removal from Aqueous Solutions}, abstract ={Background & Objective: Nitrate is one of the hazardous contaminants in the aquatic environment that causes health problems. The nitrate concentrations higher than permitted potable water limit(10 mg/l) cause Methemoglobinema disease, Nitrosamine production, intestinal cancer, and etc. In the present study, removal of nitrate from aquatic solution using the nano-magnet chitosan was investigated. Materials and methods: Magnetic chitosan was prepared by co-precipitation method.  Effects of parameters such as pH(4-8), initial concentrations of nitrate and contact time(0,5,10,15,10,30,45,60,90,120,min) on nitrate removal from aqueous solution was studied. For nitrate removal mechanism study, Langmuir and freundlich isotherms and first order and second order kinetics were used. Results: The structure of the synthesis materials was characterized by SEM,XRD  and FTIR. According to the SEM method, the nano-magnet chitosan was about 50-100nm. The FTIR analysis show that nano-magnet chitosan is able to absorb nitrate and according to the XRD, there is iron at absorbent compound. The optimum nitrate adsorption occurred at pH 7, 6 g/l of adsorbent and 100 mg/l of initial nitrate concentration that higher of adsorption capacity was also attained at contact time 60 min, it was found high adsorption capacity (141/92 mg/g) and removal percentage (85/16%) for removal of nitrate anion. Conclusion: The results of the present study showed that nano-magnet chitosan adsorbent can be used as an suitable adsorbent for removing nitrate anions from aquatic environments.}, Keywords = {Chitosan, Nano-magnet chitosan, Nitrate, Adsorption.}, volume = {2}, Number = {4}, pages = {270-282}, publisher = {alborz university of medical sciences}, title_fa = {بررسی کارایی کیتوزان نانومغناطیسی شده در حذف نیترات از محلول‌های آبی}, abstract_fa ={زمینه و هدف:  نیترات یکی از آلاینده های خطرناک محیط های آبی است که منجر به بروز مشکلات بهداشتی فراوانی می شود. وجود نیترات بالاتر از حد مجاز شرب (10 میلیگرم در لیتر) یکی از دلایل بیماری متهموگلوبین، تشکیل نیتروزآمین، سرطان دستگاه گوارش و ... است. این پژوهش با هدف حذف نیترات از محلولهای آبی با استفاده از کیتوزان نانو مغناطیسی انجام شد. روش کار: کیتوزان مغناطیسی شده توسط روش هم ترسیبی تهیه شد. اثر متغیرهای pH (8-4)، غلظت جاذب (3 ،4 ،5، 6 و7 گرم در لیتر)، غلظت اولیه نیترات و زمان ماند (0، 5، 10، 15، 20، 30، 45، 60، 90 و 120 دقیقه) بر حذف آلاینده نیترات از نمونه های آب بررسی شد. برای بررسی مکانیسم جذب نیترات، از ایزوترم لانگمویر و فروندلیخ و همچنین روابط سینتیکی درجه اول و دوم استفاده گردید.  یافته ها:  برای شناسائی مواد سنتز شده، از آنالیزهای XRD,SEM و FTIR استفاده شد. نتایج  SEM نشان داد که ابعاد کریستال کیتوزان نانومغناطیسی، اغلب در محدوده 50 تا 100 نانو متر می باشد. آنالیز FTIR مشخص نمود که کیتوزان نانو مغناطیسی پس از تماس با محلول‌ آبی محتوی نیترات، قادر به جذب نیترات می باشدو طبق آزمون XRD ، اکسید آهن در ترکیب جاذب وجود دارد. شرایط بهینه جذب نیترات در pH برابر7، جاذب 6 گرم در لیتر و غلظت اولیه آنیون نیترات100 میلی گرم در لیتر بدست آمده که بالاترین میزان جذب در زمان 60 دقیقه و درصد حذف آنیون نیترات توسط این جاذب 16/85 درصد بدست آمد. در این شرایط، ظرفیت جذب نیترات برابر 92/141میلی گرم بر گرم بدست آمد. نتیجه گیری: نتایج بدست آمده نشان داد که جاذب کیتوزان نانو مغناطیسی می تواند به عنوان جاذبی مناسب برای حذف آنیونهای نیترات از محیطهای آبی مورد استفاده قرار گیرد. }, keywords_fa = {کیتوزان, ذرات اکسید آهن نانومغناطیسی, نیترات, جذب.}, doi = {10.18869/acadpub.jehe.2.4.270}, url = {http://jehe.abzums.ac.ir/article-1-189-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-189-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Mohseni-Bandpei, Anoushiravan and Fattahzadeh, Masoud and RezaeiKalantary, Roshanak and Eslami, Akbar}, title = {Evaluation of Diazinon Adsorption from Water Solutions Using Magnetic Carbon Nano-Tubes with Fe3O4}, abstract ={Background and objective: Insecticides are one of the most important pollutants in water. Diazinon is one of the phosphorus pesticides that can be found in aquatic ecosystems in Iran. The toxic effect of diazinon is inhibition of the enzyme acetyl cholinesterase (Ache). In this study, MWCNT/ Fe3O4 efficiency was investigated. Materials and Methods: In this study, co-precipitation method was used for the Fe3O4 synthesis on multiwall carbon nanotube. The pH, contact time, adsorbent dose, pollutant concentrations and temperature parameters were investigated. Diazinon was measured by Gas chromatography method. Results: The results showed that the optimum conditions for diazinon removal were pH 6, contact time of 15 minutes, and  adsorption dose of 0.6 g/l. So, the absorption efficiency increases with increasing of temperature and decresing of pollutant concentration. The diazinon adsorption corresponded with Freundlich isotherm (R2> 0.99) more than Langmuir isotherm model (R2> 0.90). Conclusion: The results show that the magnetic carbon nanotubes with Fe3O4 can be suitable adsorbent for diazinon removal from aquatic environment. }, Keywords = {Diazinon, Carbon nanotube, Fe3O4, Adsorption}, volume = {2}, Number = {4}, pages = {283-293}, publisher = {alborz university of medical sciences}, title_fa = {بررسی میزان جذب دیازینون از محلول های آبی با استفاده از نانو لوله‌های کربنی مغناطیسی شده با Fe3O4}, abstract_fa ={زمینه و هدف: سموم حشره کش یکی از مهمترین آلاینده های آبی هستند. دیازینون یک آفت کش فسفره است که در اکوسیستم های آبی ایران یافت می شود. اثر سمی دیازینون در ارتباط با بازدارندگی آنزیم استیل کولین استراز می باشد. در این مطالعه کارایی نانولوله های کربنی مغناطیسی شده با Fe3O4  مورد بررسی  قرار گرفت. مواد و روشها: در این مطالعه از روش هم ترسیبی برای سنتز Fe3O4  بر روی نانولوله های کربنی چند جداره استفاده شد. پارامترهای pH، زمان تماس، دز جاذب، غلظت آلاینده و دمای محلول  مورد بررسی قرار گرفت. غلظت دیازینون باقی مانده با استفاده از دستگاه کروماتوگرافی گازی اندازه­گیری شد. یافته ها: نتایج این تحقیق نشان داد که  شرایط بهینه برای حذف دیازینون 6=pH، زمان تماس 15 دقیقه، دز جاذب 6/0 گرم بر لیتر است. همچنین با افزایش دما و کاهش غلظت آلاینده، میزان جذب افزایش پیدا می کرد و فرآیند جذب تطابق بیشتری با مدل ایزوترم فروندلیچ (R2>0.99) نسبت به ایزوترم لانگمویر (R2>0.90) داشته است. نتیجه گیری: نتایج این تحقیق نشان داد که نانولوله های کربنی مغناطیسی شده با Fe3O4  می تواند به عنوان جاذب مناسبی برای حذف دیازینون از محیط های آبی باشد.}, keywords_fa = {دیازینون, نانولوله های کربنی, Fe3O4, جذب}, doi = {10.18869/acadpub.jehe.2.4.283}, url = {http://jehe.abzums.ac.ir/article-1-190-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-190-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Rahmani, Kourosh and Rahmani, Ayat and Rahmani, Hasan and Zare, Mohammad Rez}, title = {Tetracycline Removal from Aqueous Solution by Nano Zero Valent Iron/UV/H2O2 Process}, abstract ={Background & Objectives: Nowadays, antibiotic residue presence in environment is a world concern, so there discharge control necessity is unavoidable.  The objective of this research was the study of Tetracycline removal from aqueous solution by Nano Zero Valent Iron/UV/H2O2 process. Methods: This research was a lab-scale experimental study that conducted in laboratory temperature. Synthetics wastewater with concentration of 15, 30, 45, and 60 mg/l prepared from stock solution (500 mg/l). The effect of operational parameters such as pH, nano zero valent iron concentration, Tetracycline antibiotic concentration , UV Radiation , H2O2  concentration and contact time determined by one at  a time method. Tetracycline antibiotic concentrations determined by UV-HPLC equipment and COD variation analyzed during the study.  Results: The results showed that tetracycline antibiotics removal efficiency in optimum conditions and initial concentrations of 15, 30, 45, and 60 mg/l were 85, 94, 100, and 78 percent, respectively. So COD removals were 35.4, 55.58, 60.3, and 33.85. Conclusion: Nano Zero Valent Iron/UV/H2O2 process is a efficient process to the removal of tetracycline antibiotic from the wastewater. So efficiency of this method can be evaluated in removal of other resistant antibiotics to biological treatment. }, Keywords = {Fenton-like processes, UV Radiation, Nano Zero Valent Iron, Tetracycline Antibiotic}, volume = {2}, Number = {4}, pages = {294-304}, publisher = {alborz university of medical sciences}, title_fa = {حذف تتراسایکلین از محلول های آبی طی فرآیند Nano Zero Valent Iron/UV/H2O2}, abstract_fa ={زمینه و هدف: حضور باقیمانده آنتی بیوتیک ها در محیط زیست امروزه به عنوان یکی از نگرانی های جهانی مطرح شده است و لزوم کنترل تخلیه آنها نیز بعنوان امری اجتناب ناپذیر مطرح شده است. این تحقیق، با هدف بررسی کارایی فرآیند تلفیقی شبه فنتون (UV/H2O2/nZVI) جهت تجزیه آنتی بیوتیک تتراسایکلین از محیط های آبی صورت گرفت. مواد و روشها: این تحقیق یک مطالعه تجربی بود که در مقیاس آزمایشگاهی و در دمای محیط انجام گرفت. برای این منظور، فاضلاب سنتتیک در 4 غلظت 45-30-15 و 60 میلی گرم در لیتر از محلول 500 میلی گرم در لیتر محلول مادر تهیه گردید و در ادامه، تاثیر تغییرات غلظت پراکسید هیدروژن، نانو ذرات آهن صفر، آنتی بیوتیک تتراسایکلین، pH، شدت پرتو فرابنفش و زمان تماس ارزیابی و شرایط بهینه برای هر یک از پارامترها با روش یک عامل در زمان تعیین گردید. در پایان نیز غلظت خروجی آنتی بیوتیک تتراسایکلین توسط دستگاه  UV-HPLCو تغییرات COD  آنالیز گردید. یافته ها: نتایج نشان داد که راندمان حذف آنتی بیوتیک تتراسایکلین در شرایط بهینه و در غلظت های 45-30-15 و 60 میلی گرم در لیتر به ترتیب 85-94-100 و 78 درصد و میزان حذف COD، 4/35-58/55-3/60 و 85/33 درصد است. نتیجه گیری: یافته های تحقیق نشان دهنده کارایی مـوثر فرآیند شبه فنتون در حضور نانو ذرات آهن صفر و پرتو فرابنفش در حـذف فاضـلاب حـاوی آنتی بیوتیک تتراسایکلین می باشد. همچنین کارایی این روش در حذف سایر آنتی بیوتیک های مقاوم به تصفیه بیولوژیکی نیز می تواند مورد بررسی قرار گیرد.}, keywords_fa = {فرآیند شبه فنتون, پرتو فرابنفش, نانو ذرات آهن صفر ظرفیتی, آنتی بیوتیک تتراسایکلین.}, doi = {10.18869/acadpub.jehe.2.4.294}, url = {http://jehe.abzums.ac.ir/article-1-191-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-191-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {YeganeBadi, Mojtaba and Esrafili, Ali and RezaeiKalantary, Roshanak and Azari, Ali and Ahmadi, Ehsan and Mokhtari, Ahmad and Gholami, Mitr}, title = {Efficacy of Persulfate-Based Advanced Oxidation Process (UV / Na2S2O8 / Fe2+) for Dimethyl Phtalate (DMP) Removal from Aqueous Solutions}, abstract ={Background and objective: The chemical industries develepment causes discharge of synthetic chemical compounds such as organic esters and plasticizers into the environment. Phthalic acid esters (PAEs) are refractory, hazardous, and emerging compounds that they produce dysfunction in hormones and endocrine, reproductive problems and cancer. Also this compounds enter into the environment through industrial effluent and causing environmental problems. The purpose of this study was evaluating the the application of UV/ Na2S2O8 / Fe2+ for DMP removal from aqueous solution. Materials and Methods: In the present study, effects of variables including, pH, persulfate concentration, Fe2+ concentration and time were studied as laboratory scale in batch method. Residual concentrations of DMP were determined by HPLC at 254 nm. The impacts of in dependent parameters on DMP removal percent were evaluated with Multi simplex and the response level(box Behnken method). Results: In this study, pH = 11, persulfate concentration of 0.51 Mmol/L, Fe2+ concentration 0.08 Mmol/L for 90 minutes, as conditions were optimized. The results showed that the DMP removal by UV/ Na2S2O8 / Fe2+ process follows first order reaction. Conclusion: The obtained results showed that UV/ Na2S2O8 / Fe2+ process for removing DMP from aquatic environments, has high efficiency (98% removal under optimal conditions). According to the results of study, the UV/ Na2S2O8 / Fe2+ can be used as an effective method for removing DMP from the chemical industries.}, Keywords = {Dimethyl phthalate, UV, Persulfate radical, Fe (II)}, volume = {2}, Number = {4}, pages = {305-318}, publisher = {alborz university of medical sciences}, title_fa = {بررسی کارآیی فرآیند اکسیداسیون پیشرفته بر پایه پرسولفات (UV/Na2S2O8/Fe2+) برای حذف دیمتیلفتالات (DMP) از محلولهای آبی}, abstract_fa ={سابقه و هدف: گسترش روز افزون صنایع شیمیایی باعث تخلیه ترکیبات شیمیایی سنتتیک مانند استرهای آلی و پلاستی سایزرها به محیط زیست شده است. استرهای اسید فتالیک (PAEs)از جمله این ترکیبات سخت تجزیه پذیر، خطرناک و نوپدید هستند که توانایی ایجاد اختلال در عملکرد هورمون ها و غدد درون ریز، مشکلات تولید مثلی و سرطان را دارند. همچنین این ترکیبات از طریق فاضلاب خروجی از صنایع وارد محیط پیرامون شده و موجب مشکلات زیست محیطی می­گردند. هدف از این تحقیق ارزیابی کاربرد فرآیند UV/Na2S2O8/Fe2+ در حذف DMP از محلول های آبی بوده است. مواد و روش‌ها: در مطالعه حاضر اثر متغیر­ها شامل pH، غلظت پرسولفات، غلظت Fe2+ و زمان در مقیاس آزمایشگاهی و به روش ناپیوسته مورد بررسی قرار گرفت. غلظت باقیمانده DMP توسط دستگاه HPLC در طول موج 254 نانومتر تعیین شد. تاثیر پارامترهای مستقل بر درصد حذف DMP با روشsimpelex  Multi و سطح پاسخ (روش باکس بانکن) مورد ارزیابی قرار گرفت. یافته‌ها: در این مطالعه 11pH=، غلظت پرسولفات برابر 51/0 میلی مول بر لیتر، غلظت آهن 08/0 میلی مول بر لیتر و زمان 90 دقیقه، به عنوان شرایط بهینه به دست آمد. نتایج نشان داد که حذف DMP به وسیله فرآیند UV/Na2S2O8/Fe2+ از واکنش های درجه اول تبعیت می نماید. نتیجه گیری: نتایج به دست آمده نشان داد که فرآیند UV/Na2S2O8/Fe2+ برای حذف DMP از محیط­های آبی، بازده بالایی (98 درصد حذف در شرایط بهینه) دارد. با توجه به نتایج مطالعه، فرآیند UV/Na2S2O8/Fe2+ را می توان به عنوان یک روش موثر در حذف DMP از صنایع شیمیایی عنوان کرد.}, keywords_fa = {دی متیل فتالات, UV, رادیکال پرسولفات, آهن(II).}, doi = {10.18869/acadpub.jehe.2.4.305}, url = {http://jehe.abzums.ac.ir/article-1-192-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-192-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {Godini, Hatam and Taheri, Fatemeh and Kamarehie, Bahram and Mostafaei, Parvin and Saeedi, Seddigheh}, title = {Removal of P-chloro Phenol from Aqueous Solutions Using Chestnut Shell Modified by Sulfuric Acid: Study of Adsorption Kinetic and Isotherm}, abstract ={Background: Present of p-chloro phenol in the environment due to high toxicity, mutagenic and carcinogenic effects, powerful odor production and stability in the environment caused to be categorized as priority pollutants. The aim of this study was to investigate the removal of p-chloro phenol from aqueous solution using chestnut shell modified by sulfuric acid. Methods: This study was an experimental study and chestnut shell (Quercus brantii Var. persica) was used as an adsorbent. The effects of pH, contact time, adsorbent dosage, and initial concentration on the adsorption process were evaluated, in a batch scale. The characterizations of the raw and modified adsorbent were investigated by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray diffractometer (XRD). Langmuir and Fruindlich isotherm models and pseudo-first order kinetic, pseudo-second order kinetic were evaluated by experimental data. Results: The results showed that the removal efficiency of p-chloro phenol increased with increasing of the contact time and adsorbent dosage, and had a reverse effect with increasing of pH and p-chloro phenol initial concentration. The maximum adsorption capacity of p-chloro phenol by modified chestnut shell adsorbent was achieved of 3.33 mg/g and the maximum removal efficiency of p-chloro phenol was 87 percent at pH=4. The experimental data were well descripted by Freundlich isotherm (R2>0.92) and pseudo-second order kinetic (R2>0.94). Conclusion: This study showed that the chestnut shell could be effectively used at removal of p-chloro phenol from aqueous solutions. As the chestnut shell is a waste, so it can be applied as an adsorbent for removal of pollutants such as p-chloro phenol.}, Keywords = {Chestnut shell, Isotherm, Kinetic, P-chloro phenol, Water solution}, volume = {2}, Number = {4}, pages = {319-331}, publisher = {alborz university of medical sciences}, title_fa = {حذف پاراکلروفنل از محلول‌های آبی با استفاده از پوست بلوط اصلاح شده با اسید سولفوریک: بررسی سینتیک و ایزوترم‌ جذب}, abstract_fa ={زمینه و هدف: حضور پاراکلروفنل در محیط زیست به دلیل سمیت بالا، سرطان­زایی و جهش­ زا بودن، ایجاد بوی قوی و پایداری در محیط زیست به عنوان آلاینده­ دارای تقدم می­باشد. هدف از این مطالعه ارزیابی حذف پاراکلروفنل از محلول­های آبی با استفاده از پوست بلوط اصلاح شده توسط اسیدسولفوریک می­باشد. مواد و روش­ها: این پژوهش یک مطالعه تجربی بوده و از پوست بلوط از جنس Quercus persica گونه ایرانی به عنوان جاذب استفاده شده است. اثر پارامترهای pH، زمان تماس، دوز جاذب و غلظت اولیه پاراکلروفنل بر روی جذب به صورت آزمایش­های ناپیوسته مورد بررسی قرار گرفت. ویژگی­های جاذب خام و اصلاح شده با اسید سولفوریک توسط اسپکتروسکوپیFTIR ، تصویر میکروسکوپ الکترونی رویشی(SEM) و پراش اشعه ایکس(XRD) بررسی گردید. مدل­های ایزوترمی لانگمویر، فروندلیچ و سینتیک درجه اول و دوم کاذب برای بررسی تطابق داده­های تجربی بررسی شد. یافته­ها: نتایج آزمایش نشان داد که کارایی حذف پاراکلروفنل با افزایش زمان تماس و دوز جاذب ارتباط مستقیم و با افزایش pH و غلظت اولیه پاراکلروفنل رابطه معکوس دارد. حداکثر ظرفیت جذب پاراکلروفنل توسط جاذب اصلاح شده با اسیدسولفوریک mg/g 33/3 و حداکثر راندمان حذف پاراکلروفنل به میزان 87 درصد در pH برابر4 به­دست آمد. جذب پاراکلروفنل با مدل ایزوترمی فروندلیچ (92/0< ) و سینتیک درجه دوم کاذب با (94/0< ) تطابق بیشتری داشت. نتیجه­گیری: این مطالعه نشان داد که پوست بلوط اصلاح شده با اسید سولفوریک کارایی نسبتاً مناسبی در حذف پاراکلروفنل دارد. با توجه به این­که پوست بلوط ماده ای زائد است، استفاده از این جاذب می­تـواند در حذف آلاینده پاراکلروفنل از فاضلاب مفید باشد.}, keywords_fa = {پاراکلروفنل, پوست بلوط, اسیدسولفوریک, ایزوترم, سینتیک.}, doi = {10.18869/acadpub.jehe.2.4.319}, url = {http://jehe.abzums.ac.ir/article-1-193-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-193-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} } @article{ author = {DehghaniTafti, Maedeh and ParvaneAval, Ehsan and Akhavan, Ehs}, title = {Compilation the Optimal Strategies of Electrical and Electronic (WEEE) Waste Management by Using SWOT, Effective Step in Protecting the Environment, Case Study: Yazd City}, abstract ={Background and objective: The most important environment issues that have been raised about the increase of industry electronics waste in last two decade. Development of countries, electronic services and the use of electrical appliances in life are to increase production of electronic waste. Electronic waste with compounds such as toxic heavy metals (cadmium and lead) and precious and recyclable metals (gold and copper) are in priority management. The aim of this study was to determine optimal strategies for the management of electronic waste using the SWOT model. Methods: SWOT is effective way to determine the direction and management of solid waste management system. This method based on the analysis of internal and external affecting management factors in terms of strengths, weaknesses, opportunities and threats. In this study, identification of the intended area and obtain basic information through a literature review and institutional visits and data collection was conducted through face to face with experts and field observations. In the form of a matrix analysis, internal and external factors that affecting on the condition of Yazd electrical and electronic waste management were analyzed by SWOT. Results and Conclusion: The study showed that the Yazd waste management system in using strengths to avoid threats and overcoming weaknesses and maximum use of opportunities to act weak. The precious metals can be considered as an important factor in waste management strategies. Lack of electrical and electronic waste production and quality knowledge can be considered as effective factors in the management of these wastes in Yazd.}, Keywords = {Eectrical and electronic waste, SWOT, City of Yazd}, volume = {2}, Number = {4}, pages = {332-348}, publisher = {alborz university of medical sciences}, title_fa = {تدوین استراتژی‌های بهینه‌ی مدیریت پسماندهای الکتریکی و الکترونیکی (WEEE) با استفاده از روش SWOT، گامی موثر در حفاظت از محیط زیست، مطالعه‌ی موردی: شهرستان یزد}, abstract_fa ={زمینه و هدف: افزایش پسماندهای الکترونیکی صنایع از مهم‌ترین مسائل محیط‌زیست در دو دهه‌ی اخیر بوده است. توسعه‌ی کشورها، گسترش خدمات الکترونیکی و گسترش استفاده از لوازم الکتریکی موجب افزایش تولید آن‌ها گردیده‌است. پسماند‌های الکترونیکی با ترکیباتی مانند فلزات سنگین سمی (کادمیوم و سرب) و فلزاتی با‌ ارزش و قابل بازیافت (طلا و مس) در اولویت مدیریتی قراردارند. هدف از این بررسی تعیین استراتژی‌های بهینه‌ی‌ مدیریت پسماندهای الکترونیکی با استفاده از مدل SWOT بود.  روش­­ها:­ SWOT روشی موثر برای تعیین جهت‌گیری‌های انواع سیستم‌های مدیریت مانند سیستم مدیریت پسماند می‌باشد، که اساس آن تجزیه و تحلیل عوامل درونی و بیرونی موثر بر مدیریت در قالب نقاط قوت و ضعف، فرصت‌ها و تهدید‌ها می‌باشد. در این مطالعه شناسایی منطقه‌ی مورد نظر و کسب اطلاعات پایه از طریق مطالعات کتابخانه‌ای و مراجعات سازمانی بوده و جمع‌آوری داده‌ها از طریق مراجعه‌ی حضوری به کارشناسان و مشاهدات میدانی انجام گرفته است. تجزیه و تحلیل ماتریس عوامل داخلی و خارجی عناصر موثر در مدیریت پسماندهای الکترونیکی شهرستان یزد با استفاده از روش SWOT صورت پذیرفت. یافته‌ها و نتیجه‌گیری: مطالعه‌ی حاضر نشان داد که سیستم مدیریت پسماند شهرستان یزد در استفاده از نقاط قوت به منظور اجتناب از تهدیدها و برطرف نمودن ضعف‌ها و استفاده‌ی حداکثری از فرصت‌ها ضعیف عمل می‌نماید. وجود فلزات گرانبها می‌تواند به‌عنوان عامل مهم در استراتژی‌های مدیریت پسماند درنظر گرفته شود. نبود دانش از تولید و کیفیت پسماندهای الکتریکی و الکترونیکی را می‌توان به عنوان عاملی تاثیرگذار در مدیریت پسماند و حفاظت از محیط زیست در شهرستان یزد در نظر گرفت.}, keywords_fa = {پسماند الکتریکی و الکترونیکی, SWOT, شهرستان یزد}, doi = {10.18869/acadpub.jehe.2.4.332}, url = {http://jehe.abzums.ac.ir/article-1-195-en.html}, eprint = {http://jehe.abzums.ac.ir/article-1-195-en.pdf}, journal = {Journal of Environmental Health Enginering}, issn = {2383-3211}, eissn = {2588-4239}, year = {2015} }