OTHERS_CITABLE بررسی شاخص کیفیت هوا و کمی سازی میزان مرگ‌ومیر ناشی از مواجه با ذرات معلق کمتر از 5/2 میکرون شهر بوکان در سال 1394 زمینه و هدف: هجوم ریز گردها به شمال غرب ایران از دهه اخیر به‌صورت تهدیدی جدی برای سلامت و اقتصاد مردم منطقه تبدیل‌شده است و خسارت جانی و مالی زیادی را ایجاد می‌کند. هدف از این تحقیق، کمی سازی میزان مرگ‌ومیر ناشی از ذرات معلق کمتر از 5/2 میکرون شهر بوکان در سال 1394 با استفاده از نرم‌افزارAirQ 2,2,3 می‌باشد. مواد و روش ها: این مطالعه توصیفی–تحلیلی در شهر بوکان انجام شد. سنجش غلظت ذرات 2.5 PM توسط دستگاه MP101M مانیتور بتامیرایی در طول سال 1394 به‌صورت 24 ساعته انجام شد و درمجموع داده‌های 321 روز توسط دستگاه ثابت سنجش آلودگی هوای شهر ثبت‌شده است. اطلاعات هواشناسی ازجمله سرعت و جهت باد و رطوبت نسبی از اداره هواشناسی اخذ گردید. نرم‌افزار با استفاده از داده‌های پردازش‌شده توسط اکسل، خطر نسبی، نرخ بروز پایه و جز منتسب را محاسبه نموده، نتیجه کار را به‌صورت مرگ‌ومیر نشان می‌دهد. یافته‌ها: بر اساس آمار ایستگاه سنجش آلودگی هوا بیشترین غلظت ساعتی 2.5 PM 52/400 میکروگرم بر مترمکعب ثبت‌شده و تعداد کل مرگ ناشی از تماس با 2.5 PM در سال94، 50 نفر بوده است. نتیجه‌گیری: تعداد مرگ‌ومیر ناشی از مواجه با آلاینده2.5 PM در اثر هجوم ریز گردها، لزوم اقدامات فوری و اساسی را برای رفع مشکل گردوغبار، همچنین به‌کارگیری تمامی امکانات و رسانه‌های عمومی در راستای آموزش مردم در خصوص نحوه برخورد با این پدیده خطرناک را می‌طلبد.   http://jehe.abzums.ac.ir/article-1-408-fa.pdf 2017-11-11 269 278 10.18869/acadpub.jehe.4.4.269 گردوغبار بوکان مرگ‌ومیر 2.5 PM و Air Q A Survey of Air Quality Index and Quantification of Cardiovascular Mortality due to Exposure to Particulate Matter Smaller than 2.5 Micron in Boukan in 2015 Background: The influx of dust to the North West of Iran during past decade has become a serious threat to the health and economy of the region and has created many human and financial damages. So, the aim of this study is to quantifying cardiovascular mortality resulted from exposure to Particulate matter smaller than 2.5 micron in Bokan in 2015 using Air Q software. Methods: This descriptive-analytic study was carried out in Bokan. The measurement of PM2.5 Concentration was done using MP101M Device around the clock in 2015, which yielded data collected for 321 days. Meteorological data, including wind speed and direction, and relative humidity were obtained from office of Meteorology. The software, using data processed with Excel, calculated Relative Risk, baseline incidence and attributable proportion and showed the output in terms of mortality. Results: Based on the statistics of air pollution monitoring station, maximum hourly PM2.5 concentration was 400.52 micrograms per cubic meter and the number of total mortality attributed to exposure to PM2.5 in 2015 was 50 cases. Conclusion: The number of total mortality attributed to exposure to PM2.5 resulted from the influx of dust, necessitates immediate action to solve the dust problem, as well as dissemination of all facilities and information through public media in order to educate people about how to deal with this dangerous phenomenon. http://jehe.abzums.ac.ir/article-1-408-en.pdf 2017-11-11 269 278 10.18869/acadpub.jehe.4.4.269 Dust Bokan Mortality PM2.5 AirQ model Majid Kermani 1 Associate Professor, Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran. Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran. AUTHOR Khaled Azarshab 2 M.S. Student of Environmental Engineering, School of Electrical, Computer and Environmental Engineering, West Tehran Branch, Islamic Azad University, Tehran, Iran AUTHOR Mohsen Dowlati 3 M.S. Student of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran AUTHOR Ghaderpoori Mansour 4 Department of Environmental Health Engineering, School of Health and Nutrition, Lorestan University of Medical Sciences, Khorramabad, Iran AUTHOR
OTHERS_CITABLE شبیه‌سازی غلظت و نحوه پراکنش گاز سولفید هیدروژن (H2S) ناشی از کوره‌های زباله‌سوز واحد بازیافت گوگرد در یک پالایشگاه گازی در عسلویه زمینه و هدف: پالایشگاه‌ها یکی از منابع اصلی آلودگی محیط‌زیست هستند که آلاینده‌های متعددی ازجمله H2S به محیط وارد می‌کنند. بنابراین نحوه انتشار و فرایند کنترل آن از حیث رعایت استانداردهای زیست‌محیطی از مسائل مهم واحدهای صنعتی است. این تحقیق به‌منظور بررسی غلظت و نحوه پراکنش گاز H2S از کوره‌های زباله‌سوز واحدهای بازیافت گوگرد در یک پالایشگاه گازی واقع در منطقه عسلویه انجام‌شده است. مواد و روش‌ها: در این مطالعه غلظت آلاینده‌های منتشره از 2 دودکش کوره‌های زباله‌سوز و همچنین غلظت آلاینده H2S در 5 ایستگاه پایش محیطی در محدود پالایشگاه و اطراف آن طی چهارفصل از تابستان 1393 تا پایان بهار 1394 اندازه‌گیری شد. سپس میزان غلظت‌های محیطی و نحوه انتشار آلاینده H2S ناشی از عملکرد این کوره‌ها با استفاده از مدل AERMOD برای متوسط‌های زمانی یک‌ساعته و 8 ساعته به‌صورت فصلی در مقیاس 50×50 کیلومترمربعی شبیه‌سازی گردید و نتایج شبیه‌سازی‌شده با مقادیر اندازه‌گیری‌های میدانی مقایسه گردید و سپس ترازهای هم غلظت و نیز نواحی حساس در محیط GIS نمایش داده شد. یافته‌ها: بررسی غلظت‌های بیشینه نشان داد حداکثر غلظت در دوره زمانی یک‌ساعته رخ‌داده است. ارزیابی عملکرد مدل بر اساس آنالیز آماری با مقایسه غلظت‌های شبیه‌سازی‌شده H2S و مقادیر اندازه‌گیری شده میدانی انجام شد. نتایج نشان داد ضرایب همبستگی در فصول تابستان93 ، پاییز 93 ، زمستان 93  و بهار 94 به ترتیب 77/0 ، 89/0 ، 75/0 و 80/0 بوده است. نتیجه‌گیری: نتایج نشان داد که روند تغییرات غلظت‌های اندازه‌گیری شده با روند تغییرات نتایج حاصل از اجرای مدل همخوانی داشته است. همچنین سهم صنایع همسایه نیز تعیین گردید. مقایسه حداکثر غلظت 8 ساعته با استانداردهای OSHA و NIOSH نشان داد که در کلیه موارد غلظت‌ها پایین‌تر از حد استاندارد بوده است.   http://jehe.abzums.ac.ir/article-1-409-fa.pdf 2017-11-11 279 288 10.18869/acadpub.jehe.4.4.279 پالایشگاه گاز مدل‌سازی انتشار سولفید هیدروژن واحد بازیافت گوگرد مدل AERMOD Simulation of Concentrations and Dispersion of Hydrogen Sulfide (H2S) Due to Incinerators of Sulfur Recovery Units in a Gas Refinery in Asaluyeh Background and Goal: Refineries are the main source of various pollutants, including Hydrogen Sulfide (H2S). Therefore distribution and control processing to meet the environmental standard limits is an important issue in industrial units.The present study was carried out to investigate H2S concentrations and dispersion patterns originating from incinerators of sulfur recovery units in a gas refinery located in Asaluyeh. Materials and Methods: In this study, H2S concentrations exhausted from two incinerators’ stacks and also ambient H2S concentrations at five monitoring stations in and around the refinery were measured in four seasons from summer 2014 to spring 2015. Moreover, the ambient concentrations and dispersion of H2S were simulated at average times of 1-hr and 8-hr on 50×50 km2 scale using  AERMOD model and the simulated results were compared with the measured ones. Meanwhile, the concentration contour plots and the sensitive regions were determined using GIS. Results: The simulation results indicated that maximum ambient H2S concentrations were in 1-h average. Assessment of model performance was performed by comparison of H2S simulated and measured concentrations using statistical analysis and showed that the correlation coefficients in summer 2014, autumn 2014, winter 2014 and spring 2015 were 0.77, 0.89, 0.75 and 0.8, respectively. Conclusion: The results of this study showed that the variations of measured concentrations were consistent with those of simulated ones. Meanwhile, the contribution of neighbor industries was determined. Comparision of 8-h H2S concentrations with OSHA and NIOSH standard limits indicated that there was no significant health risk in this refinery. http://jehe.abzums.ac.ir/article-1-409-en.pdf 2017-11-11 279 288 10.18869/acadpub.jehe.4.4.279 Gas Refinery Dispersion Patterns Hydrogen Sulfide Sulfur Recovery Unit AERMOD Model Azam Minabi 1 Department of Environmental Engineering, Graduate School of Environment and Energy, Science and Research Branch, Islamic Azad University, Tehran, Iran AUTHOR Farideh Atabi 2 Department of Environmental Engineering, Graduate School of Environment and Energy, Science and Research Branch, Islamic Azad University, Tehran, Iran AUTHOR Faramarz Moattar 3 Department of Environmental Engineering, Graduate School of Environment and Energy, Science and Research Branch, Islamic Azad University, Tehran, Iran AUTHOR Mmohammad Javad Jafari 4 . Department of Occupational Health, School of Public Health, Shahid Beheshti University of Medical Science, Tehran, Iran AUTHOR
OTHERS_CITABLE تصفیه فاضلاب مصنوعی حاوی کادمیوم (ІІ) توسط نانو کامپوزیت جدید مغناطیسی EDTA/کیتوزان/ TiO2 زمینه و هدف: کادمیوم به‌عنوان یک فلز سنگین به دلیل سمیت بالا، آسیب‌های جدی بر سلامت انسان و اثرات تجمع زیستی آن در اکولوژی، توجه زیادی را به خود جلب کرده است. در مطالعه حاضر، یک روش آسان و اقتصادی برای آماده‌سازی نانو کامپوزیت جدید مغناطیسی EDTA/کیتوزان/TiO2 (MECT) برای حذف گستره وسیعی از آلاینده‌ها به‌خصوص یون‌های کادمیوم (ІІ) از محلول آبی شرح داده‌شده است. مواد و روش‌ها: در این روش نانو کامپوزیت جدید مغناطیسی EDTA/کیتوزان/TiO2 تهیه و مورفولوژی، ساختار و ویژگی‌های آن توسط FE-SEM، EDX و XRD شناسایی و تأثیر پارامترهای مختلف نظیر pH، زمان تماس و غلظت اولیه کادمیوم  در راندمان سیستم موردبررسی قرار گرفت. یافته‌ها: نتایج حاکی از آن است که نانو ذرات MECT  با میانگین قطر کمتر از 40 نانومتر، بهترین عملکرد جذب کادمیوم را در pH بهینه 6-5 در مدت‌زمان 120 دقیقه داشته است. همچنین ایزوترم لانگمویر با ماکزیمم ظرفیت جذب mg/g 765/212، بهترین مطابقت را با داده‌های آزمایشگاهی داشت. در انتها، قابلیت استفاده مجدد نانو کامپوزیت توسط احیاکننده Na2EDTA مورد آزمایش قرار گرفت و راندمان احیا در 5 سیکل جذب و واجذب، بالای 90% مشاهده شد. نتیجه‌گیری: نانو کامپوزیت مغناطیسی MECT به‌عنوان جاذبی دوستدار محیط‌زیست، اقتصادی و قابل بازیافت، پتانسیل بالایی در تصفیه فاضلاب مصنوعی حاوی کادمیوم دارد.   http://jehe.abzums.ac.ir/article-1-410-fa.pdf 2017-11-11 289 298 10.18869/acadpub.jehe.4.4.289 نانو کامپوزیت مغناطیسی کیتوزان EDTA کادمیوم Treatment of Synthetic Wastewater Containing of Cd(II) Using Novel Magnetic EDTA/Chitosan/TiO2 Nanocomposite Background: Cadmium, as a heavy metal, has received considerable attention due to its high toxicity, causing excessive damage to health and the biomagnification effects on ecology. In present study, a facile and economic approach has been described for preparing a novel magnetic EDTA/Chitosan/TiO2 (MECT) nanocomposite to remove a wide range of pollutants, especially Cd(ІІ) ions, from aqueous solution. Methods: In this method, not only EDTA has a cheap and environmentally friendly cross-linker function, embeds Fe3O4 nanoparticles in chitosan surface, but also participates in the chelating process of metal ions, caused by functional groups. The morphology, structure, and property of the MECT were characterized by FE-SEM, EDX, and XRD techniques and the effect of different parameters including pH, contact time, and initial cadmium concentration were evaluated. Results: The results represented that MECT nanoparticles with an average diameter less than 40 nm had the best performance in adsorption of Cd(II) at optimum pH values of 5-6 and contact time of 120 min. Moreover, Langmuir adsorption isotherm is the best fit for the experimental data, in which maximum capacity of Cd(II) adsorption has been achieved 211.416 mg g-1. Finally, reusability of the nanocomposite was measured using Na2EDTA as an elution agent and regeneration efficiency of MECT was observed more than 90% in five successive sorption-desorption cycles. Conclusions: Thus, magnetic MECT nanocomposite as an environmentally friendly, economical, and recyclable adsorbent has a great potential to develop the industry of water and wastewater treatment.   http://jehe.abzums.ac.ir/article-1-410-en.pdf 2017-11-11 289 298 10.18869/acadpub.jehe.4.4.289 Magnetic nanocomposite Chitosan EDTA Cd(II) Bahareh Alizadeh 1 Department of Civil Engineering, Faculty of Engineering, Kharazmi University, Tehran, Iran AUTHOR Mohammad Delnavaz 2 Department of Civil Engineering, Faculty of Engineering, Kharazmi University, Tehran, Iran AUTHOR Alireza Shakeri 3 Faculty of Chemistry, Tehran University, Tehran, Iran AUTHOR
OTHERS_CITABLE بررسی میزان مصرف رنگ‌های خوراکی مجاز و غیرمجاز در مواد غذایی عرضه‌شده در شهرستان نظرآباد در سال 1395 زمینه و هدف: امروزه فنّاوری پردازش مواد غذایی برای افزایش ماندگاری یا بهتر نمودن ظاهر، ترکیب، بافت، طعم، رنگ، بو و ارزش غذا رو به‌سوی استفاده از افزودنی­های مواد غذایی آورده است. افزایش فراوان استفاده از رنگ‌های مصنوعی و مواد افزودنی علاوه تحریک اشتها و خوش‌طعمی غذا و بهبود شکل ظاهری آن و پنهان کردن نواقص ماده غذایی، ممکن است منجر به اثرات جانبی خطرناک احتمالی در مصرف‌کنندگان ­گردد. لذا هدف این مطالعه، بررسی کیفیت و فراوانی رنگ‌های مصنوعی مصرفی و غیرمجاز در مواد غذایی عرضه‌شده در شهرستان نظرآباد می­باشد. مواد و روش‌ها: در این مطالعه توصیفی- مقطعی، شیرینی­های خشک، جوجه‌کباب خام و سس جوجه‌کباب در قنادی­ها، رستوران­ها و اغذیه‌فروشی‌ها شهرستان نظرآباد ازنظر مقدار رنگ مصنوعی موردمطالعه گرفت. تعداد 25 نمونه از واحدهای موجود به‌صورت تصادفی بر اساس بیشترین احتمال وقوع نمونه­گیری شد و به آزمایشگاه مواد غذایی انتقال یافت پس از استخراج رنگ احتمالی، مقدار رنگ موجود در نمونه‌ها با روش کروماتوگرافی مورد شناسایی قرار گرفت. یافته‌ها: بر اساس نتایج به‌دست‌آمده 88 درصد نمونه‌ها حاوی رنگ‌های مصنوعی غیرمجاز و 12درصد نمونه­ها حاوی رنگ‌های مصنوعی مجاز بودند. از این میزان 58/92 درصد از نمونه­های شیرینی­های خشک و81/81 درصد از نمونه­های جوجه‌کباب خام و سس جوجه‌کباب از رنگ‌های مصنوعی غیرمجاز استفاده کرده بودند. و 14/7 درصد از نمونه­های شیرینی­های خشک و 18/18 درصد از نمونه­های جوجه‌کباب خام و سس جوجه‌کباب از رنگ‌های مصنوعی مجاز استفاده کردند. نتیجه‌گیری: نتایج نشان می‌دهد که فراوانی استفاده از رنگ‌های مصرفی مصنوعی، می‌تواند ناشی از ضعف دانش بهداشتی و ایمنی فروشندگان مواد غذایی، قیمت پایین این رنگ‌های و دسترسی آسان می­باشد.   http://jehe.abzums.ac.ir/article-1-411-fa.pdf 2017-11-11 299 306 10.18869/acadpub.jehe.4.4.299 روش کروماتوگرافی عوامل رنگ‌زا افزودنی‌های خوراکی Survey the Authorized and Unauthorized Food Colorings Consumption in the Food Supply of Nazarabad Township in 1395 Background: Nowadays food processing technology to extend life or improve the appearance, composition, texture, taste, color, smell, and nutrition value of the food is brought to the use of food additives. A significant increase in the use of synthetic colors and additives in addition to stimulate appetite and food palatability and improve its appearance and hide flaws food, it may lead to probable dangerous side effects in consumers. The aim of this study was to evaluate the quality and frequency of unauthorized and synthetic dyes consumption in supplied food of city Nazarabad Township. Materials and Methods: In this descriptive cross-sectional study, the measure of synthetic dye in dried sweets, raw barbecue chicken and barbecue chicken sauce of confectionaries, food shops, and restaurants of the Nazarabad Township was studied. A total of 25 random samples of the existing units based on the highest probability was taken and were transferred to the food laboratory. After extraction probable dye, the measure of the dye were quantified using chromatography. Then, the Food colorings were compared with the national standard. Results: According to the obtained results, 88% and 12% of the total samples were contained unauthorized synthetic and authorized synthetic dyes, respectively. The amount of 92.58% of the dried sweets samples, 81.18% of the raw barbecue chicken and barbecue chicken sauce samples were used unauthorized synthetic dyes, and 7.14% of dried sweets samples and 18.18% of the raw barbecue chicken and barbecue chicken sauce samples were used authorized synthetic dyes, respectively. Conclusion: the results show that the frequency use of synthetic dyes might be due to lack of health knowledge and safety of food vendors, low price and easy access of dyes.   http://jehe.abzums.ac.ir/article-1-411-en.pdf 2017-11-11 299 306 10.18869/acadpub.jehe.4.4.299 Chromatography Method Coloring Agents Food Additives Sakineh Molaei Tavani1 1 MSc of Environmental Health Engineering, School of Public Health, Alborz University of Medical Sciences, Karaj, Iran. AUTHOR Somayeh Nobari 2 BS of Environmental health, Health Department of Alborz University of Medical Sciences, Karaj, Iran AUTHOR Rokhsareh Ghasemi 3 BS of Environmental health, Health Department of Alborz University of Medical Sciences, Karaj, Iran AUTHOR Sajad Mazloomi 4 Department of Environmental Health Engineering, School of Public Health, Ilam University of Medical Sciences, Ilam, Iran AUTHOR
OTHERS_CITABLE بررسی کارایی فرآیند نانو/ پرسولفات (nZVI/PS) در حذف مترونیدازول از محیط‌های آبی زمینه و هدف: محصولات دارویی به‌ویژه آنتی‌بیوتیک‌ها ازجمله آلاینده‌های نوپدیدی می‌باشند که به دلیل خاصیت تجمعی، اثرات سوء مختلف و ایجاد مقاومت‌های دارویی، نگرانی‌های عمده‌ای را در کنترل محیط‌زیست ایجاد نموده‌اند. ازاین‌رو هدف این پژوهش، بررسی راندمان حذف مترونیدازول (MNZ) از محلول آبی با استفاده از فرایند نانو/ پرسولفات (nZVI / PS)، تعیین گردید مواد و روش‌ها: این مطالعه تجربی در مقیاس آزمایشگاهی و در سیستم بسته انجام گرفت. در این مطالعه تأثیر فاکتورهایی مثل pH محلول (۱۱-۳)، زمان واکنش (5-150 دقیقه)، دوز نانوذره (025/0-2 گرم در لیتر)، غلظت پرسولفات (1/0- 33/3 میلی مول) و غلظت اولیه مترونیدازول (1-120 میلی‌گرم در لیتر) بر روی راندمان حذف موردمطالعه قرار گرفتند. سنجش میزان مترونیدازول با استفاده از دستگاه‌ HPLC صورت گرفت. یافته‌ها: نتایج این مطالعه نشان داد که در pH بهینه 3 بیشترین راندمان حذف مترونیدازول به دست آمد. همچنین نتایج نشان داد که در زمان تماس 30 دقیقه و غلظت اولیه آنتی‌بیوتیک مترونیدازول 25 میلی‌گرم در لیتر راندمان حذف برابر 3/90درصد می‌باشد. دوز بهینه و اقتصادی کاتالیست برابر با 0.5 گرم در لیتر و پرسولفات نیز برابر با 85/1 میلی مول به دست آمد. نتیجه‌گیری: نتایج حاصل از این مطالعه کارایی قابل‌قبول فرآیند نانو/پرسولفات در تجزیه آنتی‌بیوتیک مترونیدازول را نشان دادند و افزایش راندمان 4/62 درصدی تائید کننده تأثیر خوب نانو ذرات آهن صفر ظرفیتی بر فعال‌سازی پرسولفات می‌باشد. http://jehe.abzums.ac.ir/article-1-413-fa.pdf 2017-11-12 307 320 10.18869/acadpub.jehe.4.4.307 فرآیندهای اکسیداسیون پیشرفته پرسولفات نانوذره آهن صفر مترونیدازول Efficiency of Nano/Persulfate Process (nZVI / PS) in Removing Metronidazole from Aqueous Solution Background& Objective: Pharmaceuticals, especially antibiotics, are newborn contaminants Due to its cumulative nature, adverse effects and drug resistance; it has created a major concern for environmental control. An example of these antibiotics is metronidazole (MNZ). Therefore, the purpose of this study was to determine the efficiency of removal of MNZ from aqueous solution using the nano/persulfate process (nZVI/PS). Materials and Methods: This experimental study was conducted on a laboratory scale and in a batched system. The effects of factors such as pH of solution (3-11), reaction time (5-150 min), dose of nanoparticle (0.025-2 g/L), the concentration of persulfate (0.1-3.33 mmol), and the initial concentration of metronidazole (1-120 mg/L) were studied on the removal efficiency. Metronidazole was measured by HPLC device. Results: The results of this study showed that at the optimal pH 3, the highest removal efficiency of metronidazole was obtained. With a 30 minute contact time and 25 mg/L initial concentration of metronidazole, the removal efficiency was 90.3%. The optimal and economical dose of nZVI was also obtained at 0.5 g/L and persulfate was 1.85 mM. Conclusion: The results of this study showed the acceptable performance of nano/persulfate process in the removal of metronidazole. And an increase of 62.4%, confirms the good effect of zero valent-iron nanoparticles on persulfate activation. http://jehe.abzums.ac.ir/article-1-413-en.pdf 2017-11-12 307 320 10.18869/acadpub.jehe.4.4.307 Advanced Oxidation Processes (AOPS) Persulfate Nano Zero-Valent Iron Particle Metronidazole. Asghar Hamzehzadeh 1 M.Sc. Student of Environmental Health Engineering, School of Health, Ardabil University of Medical Sciences, Ardabil, Iran AUTHOR Mehdi Fazlzadeh 2 Department of Environmental Health Engineering, School of Health, Ardabil University of Medical Sciences, Ardabil, Iran AUTHOR Kourosh Rahmani 3 Department of Environmental Health Engineering, School of Health, Ardabil University of Medical Sciences, Ardabil, Iran AUTHOR
OTHERS_CITABLE مقایسه تأثیر مساحت و ظرفیت استخرهای شنا در افزایش آلودگی کلیفرم ها و باکتری‌های هتروتروف زمینه و هدف: شنا یکی از ورزش‌ها و سرگرمی‌های بسیار مناسب و لذت‌بخش برای کلیه‌ی افراد در سنین مختلف، به‌ویژه در فصل گرما محسوب می‌شود. توجه به مسائل و جوانب بهداشتی استخرهای شنا برای تأمین سلامت و رفاه افراد شناگر بسیار مهم است. لذا در این تحقیق ارتباط ظرفیت و مساحت استخر با میزان آلودگی میکروبی و هتروتروف ها موردبررسی قرار گرفت. مواد و روش‌ها: پژوهش حاضر، پژوهشی کاربردی و از دسته مطالعات توصیفی- تحلیلی، پیمایشی و همبستگی هست که به‌صورت مقطعی انجام گرفت. در اجرای این طرح 35 استخر موجود در شهر کرج موردمطالعه قرار گرفت. بدین منظور نمونه‌برداری هرماه یک نمونه به مدت 9 ماه از استخرهای شنا صورت گرفت و سنجش کدورت، pH ، کلر باقیمانده آزاد در هنگام نمونه‌برداری و آزمایش کلیفرم ها و شمارش هتروتروفها در آزمایشگاه آب و فاضلاب صورت گرفت. درنهایت اطلاعات به‌دست‌آمده با استفاده از نرم‌افزار SPSS و آزمون همبستگی پیرسان مورد تجزیه‌وتحلیل قرار گرفتند. یافته‌ها: از مجموع 315 مورد آزمایش کلیفرم، 2/90درصد پاک گزارش گردید. از مجموع 315 مورد آزمایش HPCمیزان 7/99 درصد در محدوده پاک به دست آمد. حداقل HPC گزارش‌شده صفر، حداکثر 250 با میانگین 18/11 و انحراف معیار 698/26 هست. با استفاده از آزمون همبستگی پیرسان بین باکتری‌های هتروتروف با کدورت آب و مساحت به شناگر نیز ارتباط معنی‌داری وجود داشته است. در این مطالعه بین آلودگی آب استخرشنا با مساحت استخر ارتباط معنی‌داری وجود نداشت. نتیجه‌گیری: با توجه به نتایج به‌دست‌آمده، رعایت آیین‌نامه مقررات بهداشتی استخر و مسائل فنی می‌تواند در کاهش آلودگی میکروبی و هتروتروف ها مؤثر باشد. http://jehe.abzums.ac.ir/article-1-414-fa.pdf 2017-11-12 321 326 10.18869/acadpub.jehe.4.4.321 ظرفیت استخر مساحت استخر آلودگی میکروبی Comparison of the Effect of Area and Capacity of Swimming Pools on the Coliforms and Heterotrophic Contamination Background& Objective: Swimming is great exercise and entertainment and enjoyment for people of all ages, especially in the hot season. Due to health issues and ways to ensure the health and welfare of people, swimming pools are very important. Therefore, in this study, relationship between the capacity and area of the pool with microbial contamination and heterotrophs were investigated. Materials and Methods: This study, based on applied research and analytical - descriptive, correlational, cross-sectional survey was conducted. In this project, we studied 35 swimming pools in the city of Karaj. For this purpose, samples were collected every month for 9 months, turbidity, pH, free residual chlorine was measured at the sampling time and testing for total coliform, E.coli coliform and counting of hetrotrophic organisms in the laboratory of water and wastewater was performed. Data was analyzed by using SPSS software and peyerson analytical. Results: Frome the 315 coliform samples about 90.2% was pure. Of the 315 tested HPCs, 99.7 percent was found in the clean range. The minimum HPC reported is zero, at most 250 with an average of 18/11 and a standard deviation of 266.68. Peyerson correlation test between heterotrophic bacteria with water turbidity and area to swimmer also has a significant relationship. In this study, there was no significant relationship between swimming pool pollution with pool area. Conclusion: According to the results, observance of the sanitary regulations of the pool and technical issues can be effective in reducing microbial and heterotrophs contamination http://jehe.abzums.ac.ir/article-1-414-en.pdf 2017-11-12 321 326 10.18869/acadpub.jehe.4.4.321 Pool Capacity Pool Area Microbial Contamination Maghsoud Jafarinia 1 Environmental Health Department, Health Vice-chancellor, Alborz University of Medical Sciences, Karaj, Iran AUTHOR Mohammad Noorisepehr 2 Environmental Health Department ,School of Public Health, Alborz University of Medical Sciences, Karaj, Iran AUTHOR Somayeh Akbari 3 Environmental Health Department, Health Vice-chancellor, Alborz University of Medical Sciences, Karaj, Iran AUTHOR Negin Valaei 4 . Environmental Health Department, Health Vice-chancellor, Alborz University of Medical Sciences, Karaj, Iran AUTHOR Hosein Najafi 5 . Environmental Health Department, Health Vice-chancellor, Alborz University of Medical Sciences, Karaj, Iran AUTHOR Kourosh Kabir 6 Community Medicine Department, School of Medicine, Alborz University of Medical Sciences, Karaj, Iran AUTHOR
OTHERS_CITABLE بررسی کارایی کربن فعال مغناطیسی سنتز شده در حذف فسفات از محیط‌های آبی زمینه و هدف: تخلیه فسفر به آب­های سطحی منجر به رشد بیش‌ازحد جلبک و گیاهان آبزی شده و درنتیجه یوتریفیکاسیون رودخانه و دریاچه را به دنبال دارد. ازاین‌رو حذف این ماده به‌منظور جلوگیری نمودن از مغذی شدن منابع آب­های سطحی اهمیت یافته است. هدف از این مطالعه استفاده از جاذب کربن فعال مغناطیسی در حذف فسفات در محیط­های آبی آلوده است. جوش‌کار: در این تحقیق تأثیر عوامل مؤثر در این فرآیند از قبیل pH  ،غلظت اولیه فسفات، دوز جاذب  و مدت‌زمان در حذف فسفات از محلول­های سنتتیک در سیستم ناپیوسته بررسی گردید. یافته­ها: نتایج نشان دادند که با افزایش غلظت اولیه فسفات، و همچنین افزایش دوز جاذب کربن فعال مغناطیسی و زمان تماس و pH تا 7، کارایی فرآیند به‌طور چشمگیری افزایش یافت. به‌طوری‌که حذف فسفات از محلول در غلظت 5 میلی‌گرم بر لیتر، تحت شرایط 7pH=، دوز جاذب 8/0 گرم بر لیتر و زمان تماس 30 دقیقه تا 70/98 درصد افزایش یافت. نتیجه­گیری: کارایی بالای 98 درصدی فرآیند جذب در این مطالعه نشان داد که کربن فعال مغناطیسی قابلیت خوبی در حذف فسفات دارد و می‌تواند به‌عنوان یک روش پیشنهادی مناسب و نوین جهت حذف فسفات از محیط‌های آبی مورداستفاده قرار گیرد.  http://jehe.abzums.ac.ir/article-1-415-fa.pdf 2017-11-12 327 334 10.18869/acadpub.jehe.4.4.327 کربن فعال مغناطیسی فسفات جذب Synthesized Magnetic Activated Carbon for Phosphate Removal from Aqueous Solutions   Background & Objective: Discharge of phosphorous into surface water causes excessive growth of algae and aquatic plants followed by Eutrophication in lakes and rivers. Thus eliminating it from water supply is important. The aim of the present study is application of magnetic activated carbon to remove phosphate from aqueous solutions. Materials & Methods: Effects of operational parameters such as pH, initial concentration of phosphate, adsorbent dose and reaction time to remove phosphate was investigate in a batch reactor. Results: Adsorption efficiency increased significantly by increasing the initial concentration of phosphate, reaction time, adsorbent dose and pH to 7. On the other hand, the maximum removal of phosphate (98.7%) occurred at 5 mg/L of phosphate concentration, pH=7, adsorbent dosage of 0.8 g/L and contact time of 30 min. Conclusion: The high efficacy of the adsorption process in this study showed that magnetic activated carbon had good capability in the removal of phosphate and can be used as an appropriate and new method for phosphate removal from aqueous solutions http://jehe.abzums.ac.ir/article-1-415-en.pdf 2017-11-12 327 334 10.18869/acadpub.jehe.4.4.327 Activated carbon Magnetic. Phosphate Adsorption Emad Dehghanifard 1 Department of Environmental Health Engineering, Faculty of Health, Alborz University of Medical Sciences, Karaj, Iran AUTHOR Roghayeh Noroozi 2 Department of Environmental Health Engineering, Faculty of Health, Alborz University of Medical Sciences, Karaj, Iran AUTHOR Bahare MirzaHedayat 3 MSc of Environmental Health Engineering, Department of Environmental Health Engineering, Faculty of Health, Alborz University of Medical Sciences, Karaj, Iran AUTHOR
OTHERS_CITABLE تجزیه آموکسی سیلین با استفاده از فرآیند الکتروفنتون گرافیت فلت اصلاح‌شده و نانو کاتالیست Fe3 O4 سابقه و هدف: آموکسی­سیلین پرمصرف­ترین آنتی­بیوتیکی‌ است که به دلیل ایجاد مقاومت در باکتری­ها موردتوجه خاصی قرارگرفته است. این ترکیب از مسیرهای مختلفی مانند دفع مستقیم فاضلاب و زائدات پزشکی، دامپزشکی و صنعت می‌تواند، وارد محیط­های آبی ­شود. هدف از این مطالعه، حذف آموکسی سیلین به‌وسیله فرآیند الکتروفنتون با استفاده از گرافیت فلت اصلاح‌شده و نانو ذرات Fe3O4  از محلول‌های آبی بود. مواد و روش­ها:  نانو ذرات Fe3O4 به‌وسیله روش هم ترسیبی شیمیایی سنتز شد. گرافیت فلت نیز به­منظور اجتناب از هوادهی، اصلاح شد. مشخصات ساختاری و فیزیکی نانوکاتالیست و گرافیت فلت اصلاح­شده با تکنیک­های SEM، EDS و BET آنالیز شد. بعد از بهینه‌سازی دو متغیر pH و زمان، پارامتر­های شدت‌جریان، غلظت آموکسی­سیلین، دوز کاتالیست و فاصله بین الکترودها با استفاده از نرم‌افزار Design Expert 7 طراحی و با استفاده از روش سطح پاسخ بهینه­سازی گردید. یافته­ها: اصلاح گرافیت فلت منجر به افزایش سطح موثرآن از 89/0 به  m2/g92/1 شد. حداکثر میزان حذف آموکسی سیلین ( 11/97 درصد )، در 3 =pH، زمان 60 دقیقه، شدت‌جریان mA 180، غلظت آموکسی سیلین mg/L 20، غلظت کاتالیست g/L1 و فاصله بین الکترودها cm 2 به دست آمد. استنتاج: نتایج این مطالعه نشان داد، فرایند الکتروفنتون با نانو ذرات Fe3O4 و گرافیت اصلاح­شده،  بدون  هوادهی خارجی یک فرایند مؤثر در حذف آموکسی­سیلین است.   http://jehe.abzums.ac.ir/article-1-416-fa.pdf 2017-11-12 335 348 10.18869/acadpub.jehe.4.4.335 آموکسی‌سیلین الکتروفنتون محلول‌های آبی گرافیت اصلاح‌شده Fe3O4 Degradation of Amoxicillin Using Modified Graphite Felt and Fe3 O4 Nanocatalyst As Electro-Fenton Process Background: Amoxicillin is the most commonly used antibiotics that draws more attractions due to induce bacterial resistance. This compound can enter the aquatic environment through different routes including sewage and waste disposal of medical health centers, veterinary and industries. The aim of this study was removal of amoxicillin from aqueous environments by Electro-Fenton process using modified graphite felt and synthesized Fe3O4 nanoparticles. Methods: Fe3O4 nanoparticles were synthesized by co- precipitation method. Graphite felt also modified due to avoid aeration. The structural and physical characteristics of nanocatalyst and also modified graphite felt were analyzed by SEM, EDS and BET techniques. After optimization of pH and time variables, the parameters of applied current, amoxicillin concentration, catalyst load and the distance between electrodes were designed using Design Expert 7.0 software and optimized by the response surface method. Results: The graphite felt modification resulted in increase in surface area from 0.89 to 1.92 m2/g. The maximum removal of amoxicillin (97.11%) was obtained in optimal operational conditions (pH=3, time=60 min, applied current =180 mA, amoxicillin concentration=20 mg/L, catalyst load 1 g/L, the distance between electrodes =2 cm) Conclusion: The result of this study indicated that electro-Fenton process using Fe3O4 nanoparticles and modified Graphite felt without external aeration is an effective method for amoxicillin removal http://jehe.abzums.ac.ir/article-1-416-en.pdf 2017-11-12 335 348 10.18869/acadpub.jehe.4.4.335 Amoxicillin Electro-Fenton modified graphite felt Fe3O4 Masume Rahmatinia 1 . Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran AUTHOR Roshanak Rezaei Kalantari 2 Professor, Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran , -Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran AUTHOR Mehdi Farzadkia 3 Professor, Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran , -Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran AUTHOR Majid Kermani 4 -Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran , -Associate Professor, Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran AUTHOR