OTHERS_CITABLE
بررسی شدت میدان الکتریکی و چگالی شار مغناطیسی در پستهای برق فشارقوی (230 کیلوولت) استان گلستان
مقدمه: تحولات صنعتی اخیر در جوامع بشری باعث پیشرفت سریع فناوری های تولید و توزیع برق شده است که بهنوبه خود منجر به تقویت شبکه های برق و استفاده از ولتاژهای بالا میشود. اثرات ناشی از میدانهای الکترومغناطیسی بر موجودات زنده مدتهاست که تحت بررسی پژوهشگران بوده و در بسیاری از موارد به دلیل درازمدت بودن مطالعات وکندی تأثیر میدانها بر فرآیندهای چرخه حیات، اظهارنظر قطعی امکانپذیر نیست. با توجه به اثرات مضر مواجهه با امواج الکترومغناطیس این مطالعه باهدف بررسی شدت میدان الکتریکی و چگالی شار مغناطیسی در پستهای برق فشارقوی (KV220) استان گلستان شکل گرفت.
مواد و روشها: این پژوهش به روش مقطعی(توصیفی–تحلیلی) در پستهای برق 230 کیلوولت استان گلستان در سال 1395انجامگرفته است. میدان الکتریکی و چگالی شار مغناطیسی توسط دستگاه مدل TM-190 در 5 پست استان گلستان اندازهگیری و با استانداردها مقایسه گردید.
یافته ها: 100 درصد شدت میدان الکتریکی و چگالی شار مغناطیسی اندازهگیری شده در پستهای برق 230 کیلوولت استان گلستان کمتر از استانداردها هست.
نتیجه گیری: شدت میدانهای الکتریکی و مغناطیسی در پست های برق در دامنه حدود مجاز شغلی قرارداد.
http://jehe.abzums.ac.ir/article-1-738-fa.pdf
2020-04-27
111
118
10.29252/jehe.7.2.111
پست های برق
میدان الکتریکی
چگالی شار مغناطیسی
Survey of Electric Field Intensity and Magnetic Density at High Voltage Substations (230 kV) in Golestan Province
Introduction: Recent industrial developments have led to the rapid development of electricity production successively; it leads to power grids and high voltage utilization. The effects of electromagnetic fields have been investigated on the organism by researchers. In many cases, it is not possible to conclusively comment, because of the slowness impact of fields of life-cycle processes and the long-term studies. According to the harmful effects of exposure to electromagnetic waves, this study was conducted to investigate the electric field intensity and magnetic field at high voltage substations (230 kv) in Golestan province.
Materials and Methods: This Cross-sectional study (descriptive-analytical) was performed at 230 kv substations in Golestan Province (1396). The electric field and the magnetic field density were measured by instrument model TM-190 at 5 posts in Golestan province and compared with the standards.
Results: 100 % of the measured electric field intensity and magnetic field of the 230 kv substations in Golestan Province is less than the standard.
Conclusion: The magnitude of the electric and magnetic fields is in the occupational limits.
http://jehe.abzums.ac.ir/article-1-738-en.pdf
2020-04-27
111
118
10.29252/jehe.7.2.111
Substation
Electric field
Magnetic field density
Mohamad
Ranjbarian
1
Lecturer , Department of safety and Occupational Health engineering, School of health, shahid beheshti university of medical science, Tehran, Iran
AUTHOR
Jaleledin
Saadi
2
Msc in occupational health, Health Department, golestan university of medical science, Golestan, Iran
AUTHOR
Korosh
Etemad
3
Assistant Professor of Epidemiology Department, Health Faculty, Shahid Beheshti University of Medical Sciences, Tehran, Iran
AUTHOR
Rozita
Farhadi
4
Msc in occupational health, Department of safety and Occupational Health engineering school of health , shahid beheshti university of medical science, Tehran, Iran
AUTHOR
Azar
Musavifard
5
Lecturer , Department of safety and Occupational Health engineering, School of health, alborz university of medical science, Alborz, Iran
AUTHOR
Fatemeh
Zarei
6
Msc in occupational health, school of health, alborz university of medical science, Alborz, Iran
AUTHOR
https://orcid.org/ 0000-0002-8691-0114
OTHERS_CITABLE
بررسی کارایی فرآیند ازن زنی کاتالیزوری با نانوذرات مغناطیسی TiO2/Fe3O4 در حذف آنتی بیوتیک سفتازید از محیطهای آبی
سابقه و هدف: حضور پساب های حاوی ترکیبات آنتی بیوتیکی مانند پساب صنعت داروسازی یکی از مشکلات در رابطه با آلودگی محیط زیست میباشد. برخی از ترکیبات دارویی مورد استفاده در درمان انسان ها به طور کامل در تصفیه خانه های فاضلاب شهری حذف نمی شوند. بنابراین به عنوان آلاینده به آب های پذیرنده تخلیه شده و موجب بروز مشکلات زیست محیطی می گردند. هدف از این مطالعه استفاده از TiO2 به عنوان کاتالیست در فرایند ازن زنی کاتالیزوری غیرهمگن در یک راکتور Semi batch جهت حذف آنتی بیوتیک سفتازید از فاضلاب سنتتیک می باشد.
مواد و روشها: این مطالعه از نوع بنیادی - کاربردی میباشد که در مقیاس پایلوت انجام گردید. روش سل ژل بهمنظور سنتز نانو ذرات دی اکسید تیتانیوم مغناطیسی شده مورد استفاده قرار گرفت و از آنالیز های SEM،XRD و EDXجهت بررسی خصوصیات کاتالیست استفاده گردید. اثر متغیرها شاملpH، دوز کاتالیست، زمان واکنش، غلظت آلاینده بر عملکرد فرایند مورد بررسی قرار گرفت. غلظت باقیمانده سفتازید توسط دستگاه HPLC تعیین گردید.
یافتهها: یافته ها نشان میدهد که بیشترین کارایی حذف سفتازید در شرایط قلیایی رخ میدهد و رابطه مستقیمی بین راندمان حذف و pH برقرار است، دوز کاتالیست 2گرم بر لیتر بهعنوان شرایط بهینه به دست آمد و با افزایش زمان تماس و کاهش غلظت سفتازید راندمان حذف افزایش یافت. نتایج نشان داد که حذف سفتازید بهوسیله این فرآیند از مدل درجه اول تبعیت مینماید.
نتیجهگیری: نتایج نشان داد که فرآیند ازن زنی کاتالیزوری با نانوذرات دی اکسید تیتانیوم مغناطیسی شده برای حذف سفتازید از محیطهای آبی، بازده بالایی دارد. فرایند ازن زنی کاتالیزوری را می توان به عنوان روشی موثر در حذف سفتازید در نظر گرفت.
http://jehe.abzums.ac.ir/article-1-739-fa.pdf
2020-04-28
119
134
10.29252/jehe.7.2.119
سفتازید
ازن زنی
نانوذرات دی اکسید تیتانیوم مغناطیسی
Evaluation the Efficiency of Catalytic Ozonation by Magnetic Nanoparticles TiO2/Fe3O4 in Removal of Ceftazide Antibiotic from Aqueous Solutions
Background & aim: The discharge of pharmaceutical effluent containing antibiotics into water resources is a great of concern associated with environmental pollution. In addition, conventional treatment systems are not capable of eliminating these antibiotics which commonly used in dealing with treatment of humans. Furthermore, over-consuming of antibiotics over the past few decades has forced researchers to find new techniques in order to deal with this environmental issues of great concern. In the present work, TiO2 was employed as a catalyst in the non-homogenous catalytic ozonation process for removal of Ceftazide antibiotics from synthetic sewage.
Materials and Methods: This fundamental-practical study was conducted in a pilot scale. The magnetic TiO2 nano-sized particles were synthesized through a sol-gel method. The properties of magnetized titanium dioxide nanoparticles as catalyst were characterized using SEM, XRD and EDX. The effects of variables: pH, catalyst dose, reaction time, pollutant concentration on the performance of catalytic process were investigated. The residual concentration of Ceftazide was analyzed by a high performance liquid chromatography (HPLC).
Results: The findings of present study indicated that the high removal efficiency of Ceftazide occurs in alkaline conditions and a direct relation was observed between removal efficiency and pH. The catalyst dose of 2 g/l was determined as optimum dosage and the Ceftazide removal efficiency was improved by decreasing the initial concentration as time proceeded. The results showed that the removal of Ceftazide by this catalytic process are fitted with the first-order model.
Conclusion: The results show that the catalytic ozonation process with magnetized titanium dioxide nanoparticles has high efficiency for removal of Ceftazide from aqueous media. The catalytic ozonation process can be considered as an effective way to remove Ceftazide antibiotics from aqueous environment.
http://jehe.abzums.ac.ir/article-1-739-en.pdf
2020-04-28
119
134
10.29252/jehe.7.2.119
Ceftazide
Ozonation
Magnetic Titanium dioxide Nanoparticles
Mojtaba
Yegane Badi
1
PhD Student of Environmental Health Engineering, Faculty of Health, Iran University of Medical Sciences, Tehran, Iran
AUTHOR
Ali
Esrafili
2
Associate Professor, Department of Environmental Health Engineering, Faculty of Health, Iran University of Medical Sciences, Tehran, Iran
AUTHOR
Hasan
Pasalari
3
PhD Student of Environmental Health Engineering, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences, Tehran, Iran
AUTHOR
Sevda
Fallah Jokandan
4
PhD Student of Environmental Health Engineering, Department of Environmental Health Engineering, Faculty of Health, Iran University of Medical Sciences, Tehran, Iran
AUTHOR
Mahdi
Farzadkia
5
Associate Professor, Department of Environmental Health Engineering, Faculty of Health, Iran University of Medical Sciences, Tehran, Iran
AUTHOR
https://orcid.org/0000-0001-7795-9461
OTHERS_CITABLE
بررسی تجمع فلزات سنگین در گیاهان آبیاری شده با آب چاه و فاضلاب تصفیه شدهی شهر بیرجند
زمینه و هدف: در سالهای اخیر در کشورهای خشک و نیمه خشک استفاده از فاضلاب شهری در آبیاری گیاهان مورد توجه قرار گرفته است. با وجود اینکه استفاده از فاضلاب میتواند یک استراتژی پایدار و موثر باشد، اثرات زیست محیطی این کاربرد باید بررسی شود. هدف در این مطالعه بررسی امکان استفاده از فاضلاب شهری تصفیه شده در آبیاری گیاهان زراعی میباشد.
مواد و روشها: در این مطالعه غلظت فلزات سنگین آهن، روی، کروم، مس، منگنز و نیکل در اندامهای مختلف و خاک اطراف ریشه گیاه جو و ذرت بررسی شد. گیاهان مورد بررسی با منابع مختلف آب آبیاری شدند. سپس اثرات منابع مختلف آبیاری بر جذب فلزات در قسمتهای مختلف گیاه به وسیله آزمونهای آماری بررسی شد.
یافتهها: با توجه به نتایج، نوع منبع آب (آب چاه، فاضلاب تصفیه شده) بر میانگین غلظت فلز سنگین مس در برگ جو، فلزات کروم ، مس و نیکل در ریشه جو و فلزات مس و نیکل در خاک اطراف ریشه جو در سطح 5% معنیدار بود. غلظت نیکل در این مطالعه در خاک اطراف ریشه برای هر دو گیاه و هر دو منبع آبیاری به علت وجود نیکل در سنگهای اولترامافیک منطقه بیش از حد بحرانی بود. به علت عملکرد مناسب برکههای تثبیت تصفیه خانه شهر بیرجند در کاهش فلزات سنگین از فاضلاب شهری، غلظت اکثر فلزات سنگین اندامهای گیاهی و خاک اطراف ریشه در حالت آبیاری با فاضلاب تصفیه شده نسبت به حالت آبیاری با آب چاه بطور معنیداری کمتر بود. به علت نزدیکی مزارع به محل تردد خودروهای سنگین غلظت مس در تمام حالات مورد بررسی بالا و نزدیک به محدوده بحرانی بود. غلظت فلز کروم در اندامهای هوایی گیاه نسبت به سایر فلزات مورد بررسی کمتر بود که نشان دهنده، تحرک کمتر این فلز نسبت به سایر فلزات مورد بررسی است.
نتیجهگیری: با توجه به نتایج این مطالعه، غلظت فلزات سنگین در گیاهان مورد بررسی کمتر از حدود بحرانی بود. همچنین غلظت فلزات در خاک اطراف ریشه بیشتر از غلظت در اندام گیاهان بود. بنابراین پایش مستمر غلظت این فلزات در خاک و گیاهان برای جلوگیری از تجمع فلزات سنگین در زنجیره غذایی ضروری است.
http://jehe.abzums.ac.ir/article-1-740-fa.pdf
2020-04-28
135
151
10.29252/jehe.7.2.135
فلزات سنگین
محصولات زراعی
فاضلاب شهری
اندامهای گیاهی
خاک
Study of Heavy Metal Accumulation in Plants Irrigated with Well Water and Wastewater from Birjand Wastewater Plant
Introduction: In the recent years, the use of municipal wastewater for irrigation has attracted the consideration of arid countries. Despite the potential use of municipal wastewater in plants irrigation as sustainable strategy, the environmental impacts need to be investigated. The aim of this study was to evaluate the use of treated wastewater in irrigation crop plants.
Methods: The present study was carried out to assess levels of iron, zinc, chrome, copper, manganese and nickel, in plants irrigated with water from different sources. Impact of different irrigation sources on metals uptake by plants were determined using Statistical tests.
Results: According to the results, the type of water source (well water, treated wastewater) had a significant effect at 5% level on the mean concentration of Cu in barley leaves, Cr, Cu and Ni in barley root and Cu and Ni in soil around barley root. In this study, nickel concentration was higher than critical value in the soil around the roots for both plants and both irrigation sources due to the presence of nickel in the ultramafic rocks. Due to the proper performance of Birjand treatment plant stabilization ponds in reducing heavy metals from municipal wastewater, the concentration of most heavy metals in plant and soil in irrigation with treated wastewater was significantly lower than in irrigation with well water. The proximity of farms to heavy-duty vehicles increased the concentration of copper in all the situations studied which were close to the critical range. The concentration of chromium in shoots of plant was lower than other metals.
Conclusion: As a result, the values of heavy metals in different parts of plants were below the acceptable levels as suggested. In comparison to plants, the soil presented higher concentration of all studied metals. However, the regular monitoring of levels of these metals from well water and treated wastewater, in plants and soil is essential to prevent excessive build-up of these metals in the food chain.
http://jehe.abzums.ac.ir/article-1-740-en.pdf
2020-04-28
135
151
10.29252/jehe.7.2.135
Heavy metals
Crops
Municipal wastewater
Herbal organs
Soil
Mohamad Javad
Zoqi
1
Assistant Professor, Department of Civil Engineering, Faculty of Engineering, University of Birjand, Birjand, Iran
AUTHOR
https://orcid.org/0000-0002-6999-4221
Mohamad Reza
Doosti
2
Associate Professor, Department of Civil Engineering, Faculty of Engineering, University of Birjand, Birjand, Iran
AUTHOR
OTHERS_CITABLE
سنتز نانو ذرات اکسید منیزیم و بررسی کاربرد آن در حذف آنتی بیوتیک تتراسایکلین از محلولهای آبی
زمینه و هدف: اکسید منیزیم از جمله اکسیدهای فلزات قلیایی خاکی می باشد که به دلیل خاصیت کاتالیزوری آن بطور گسترده ای در در تجزیه مواد شیمیایی خطرناک مورد استفاده قرار گرفته است. هدف اصلی در این پژوهش، حذف آنتی بیوتیک تتراسایکلین با استفاده از نانو اکسید منیزیم می باشد.
مواد و روشها: در این پژوهش نانو ذرات اکسید منیزیم به روش همرسوبی و در حضور دترجنت ستیل تری متیل آمونیوم برماید سنتز شد. در نانو ذرات سنتز شده توسط تکنیک های آنالیز پراش اشعه ایکس (XRD)، آنالیز حرارتی (TGA) آنالیز میکروسکوپی انتقالی (TEM)، آنالیز توزیع اندازه ذرات (DLS)، آنالیز اشعه مادون قرمز (FTIR) و میکروسکوب فاز انتشاری الکترونی (FESEM) مورد بررسی قرار گرفت. در مرحله بعد کارایی نانو ذرات سنتز شده در سیستم ناپیوسته و با تغییر دادن یک پارامتر و ثابت نگه داشتن سایر پارامترها در حذف آنتی بیوتیک تتراسایکلین مورد بررسی قرار گرفت.
یافته ها: با افزایش pH از 3 به 7 راندمان افزایش یافته ولی بعد از آن تا رسیدن به 11=pH با کاهش دوباره راندمان مواجه شدیم. با افزایش زمان تماس راندمان افزایش یافته است. این افزایش تا زمان 60 دقیقه شیب تندتری داشته و بعد از 60 دقیقه تقریبا ثابت می شود. با توجه به سایر غلظت های موجود زمان 60 دقیقه به عنوان زمان بهینه انتخاب شد. راندمان بدون حضور یون های مداخله گر در شرایط بهینه برابر 68/81 % بود که با افزودن یون های مداخله گر راندمان در کمترین سطح غلظت مداخله گرها به 29/62%(نیترات)، 11/40 %(سولفات)، 32/55 %(مس) و 56/43% (فلوراید) کاهش یافت. بیشترین کاهش راندمان مربوط به یون سولفات با غلظت ppm 300 بود که راندمانی معادل 15% را نشان داد.
نتیجه گیری: نتایج مطالعه نشان داد که جاذب MgO قادر به حذف مناسب آلاینده تتراسایکلین از منابع آبی میباشد
http://jehe.abzums.ac.ir/article-1-737-fa.pdf
2020-03-17
152
164
10.29252/jehe.7.2.152
نانو ذرات اکسید منیزیم
آنتی بیوتیک تتراسایکلین
محلولهای آبی
جذب سطحی.
Synthesis of Magnesium Oxide Nanoparticles and Their Application in Removal of Tetracycline Antibiotic from Aqueous Solutions
Background: Magnesium oxide is one of the alkaline earth metal oxides which due to its catalytic properties has been widely used in the analysis of hazardous chemicals. The main purpose of this study was to remove tetracycline antibiotics using magnesium nano oxide.
Methods: In this study, magnesium oxide nanoparticles were synthesized in the presence of cetyl trimethyl ammonium bromide. Synthesized nanoparticles were analyzed by X-ray diffraction (XRD), thermal analysis (TGA), transmission microscopic analysis (TEM), particle size distribution analysis (DLS), infrared radiation analysis (FTIR) and electron diffraction (FES) electron microscopy (FES). In the next step, the efficiency of the synthesized nanoparticles in the batch system was investigated by changing one parameter and keeping the other parameters constant in removal of the tetracycline antibiotic.
Results: Increasing the pH from 3 to 7 caused efficiency increase, but decreased again to pH = 11. As the contact time increases, the efficiency increases. This increase was steepest for 60 minutes and is almost constant after 60 minutes. According to other available concentrations,the contact time of 60 minutes was chosen as the optimum time. The efficiency without the presence of interfering ions in optimum condition was 81.68%. By adding the interfering ions the efficiency at the lowest concentration level of the interferers was 62.29% (nitrate), 40.11% (sulfate), 55.32% (Cu) and 43.56% (fluoride) decreased. The highest reduction was obtained with sulfate ion at 300 ppm which showed an efficiency of 15%.
Conclusion: The results of this study showed that MgO adsorbent can efficiently remove tetracycline contaminants from water resources.
http://jehe.abzums.ac.ir/article-1-737-en.pdf
2020-03-17
152
164
10.29252/jehe.7.2.152
Magnesium oxide nanoparticles
Tetracycline antibiotic
Aqueous solutions
Adsorption
Bahareh
Mirzahedayat
1
Department of Environmental Health Engineering, School of Public Health, Alborz University of Medical Sciences, Karaj, Iran
AUTHOR
Masoomeh
Entezari
2
Department of Environmental Health Engineering, School of Public Health, Alborz University of Medical Sciences, Karaj, Iran
AUTHOR
Mansur
Zarrabi
3
Department of Environmental Health Engineering, School of Public Health, Alborz University of Medical Sciences, Karaj, Iran. 2. Research Center for Health, Safety and Environment, Alborz University of Medical Sciences, Karaj, Iran
AUTHOR
Emad
Dehghanifard
4
Department of Environmental Health Engineering, School of Public Health, Alborz University of Medical Sciences, Karaj, Iran. 2. Research Center for Health, Safety and Environment, Alborz University of Medical Sciences, Karaj, Iran
AUTHOR
Mohammad
Noorisepehr
5
Department of Environmental Health Engineering, School of Public Health, Alborz University of Medical Sciences, Karaj, Iran. 2. Research Center for Health, Safety and Environment, Alborz University of Medical Sciences, Karaj, Iran
AUTHOR
https://orcid.org/0000-0002-1207-2939
OTHERS_CITABLE
بررسی اثر سن کمپوست بر کیفیت کمپوست ساخته شده(مطالعه موردی کارخانه کمپوست سازمان مدیریت پسماند شهرداری اصفهان)
مقدمه: امروزه مسئله مواد زائد جامد شهری یا پسماند شهری یکی ازمسایل و مشکلات جدی در کل شهرهای دنیا است. کمپوست کارخانه های بازیافت از زمان تولید و رسیدن تا مرحله فروش و مصرف آن مدت زمان قابل توجهی نگهداری میشود. در این پژوهش بررسی اثر سن کمپوست بر کیفیت آن در کارخانه کمپوست سازمان مدیریت پسماند شهرداری اصفهان انجام شد.
روش کار: جهت انجام این پژوهش یک توده کمپوست به وزن حدودا 300 تن از کمپوست تازه تولید شده و آماده شده برای فروش در محل خاصی از کارخانه بصورت جدا نگهداری شد و در زمان های صفر، چهار و نه هفته انجام شد. در کمپوستها فاکتورهای آمونیاک، نیترات، آمونیوم، فسفر، پتاسیم، نیتروژن کل، نیتروژن معدنی، نیتروژن آلی، سدیم، کلسیم، منیزیم، کربن، چگالی، EC، pH، اکسیژن خواهی شیمیایی و نسبت کربن به نیتروژن در هر مقطع زمانی با سه تکرار آزمایش صورت گرفت.
یافته ها: نتایج این تحقیق نشان داد فاکتورهای آمونیاک، نیترات، آمونیوم، نیتروژن کل، نیتروژن معدنی، نیتروژن آلی، EC، pH، رطوبت، چگالی و نسبت کربن به نیتروژن در کمپوست اولیه به ترتیب 1800، 58/35، 28/2314، 14000، 2400، 11600، 145/7، 245/7، 85/6، 286 و 54/12 بود و در نهایت در هفته نهم 145/873، 325/81، 61/1122، 63/15065، 63/1215، 13850، 71/5، 35/7، 005/5، 5/279 و 04/22 شد که میزان آمونیاک، آمونیوم فسفر، نیتروژن معدنی، EC، رطوبت و چگالی با اختلاف معنی داری کاهش پیدا کرد و بقیه فاکتورها با اختلاف معنی داری افزایش یافت. نتایج فسفر نیز با یکدیگر اختلاف معنی داری نداشتند. همچنین نتایج این تحقیق نشان داد فاکتورهای آمونیاک، آمونیوم، فسفر، نیتروژن کل، نیتروژن معدنی، نیتروژن آلی، EC و COD در شیرابه در هفته صفر 26/244، 05/314، 73/298، 6/1153، 36/325، 2/6289، 088/37 و 24/3635 بود و در هفته نهم به ترتیب 36/110، 89/141، 43/285، 366، 98/148، 217، 728/15 و 76/5733 شد که میزان پارامترهای آمونیاک، نیترات، آمونیوم، نیتروژن کل، نیتروژن معدنی، نیتروژن آلی و EC با اختلاف معنی داری کاهش یافت ولی میزان COD با اختلاف معنیداری افزایش یافت و نتایج فسفر و نیترات با یکدیگر اختلاف معنی داری نداشتند.
نتیجه گیری: در نهایت می توان نتیجه گرفت که کیفیت کمپوست با گذشت زمان کاهش می یابد و هرچه از مدت زمان تولید کمپوست بگذرد به صورت کلی عناصر غذایی مورد مصرف گیاهان در کمپوست کاهش می یابد.
http://jehe.abzums.ac.ir/article-1-744-fa.pdf
2020-04-29
165
178
10.29252/jehe.7.2.165
کمپوست
شیرابه
افزایش سن کمپوست
پارامترهای تاثیرگذار در کیفیت کمپوست
The Study of the Age of Compost on the Quality of the Produced Compost (A Case Study of Compost Municipal Waste Management Organization)
Introduction: Today, the issue of urban solid waste or urban waste is one of the most serious problems in the whole world. Composting plants have a significant amount of time from the production and production stage to the sale and consumption stage. In this study, the effect of compost age on the quality of the compost factory was carried out in Isfahan City waste management organization.
Method: To conduct this study, a compost mass of about 300 tons of newly produced compost and prepared for sale at a particular site from the plant and was done in a special place of four and nine weeks. There are ammonia, nitrate, ammonium, phosphorus, potassium, total nitrogen, mineral nitrogen, organic nitrogen, sodium, calcium, magnesium, carbon, density, EC, pH, oxygen, sulfur, and the ratio of carbon to nitrogen was done at any time with three iterations of the experiment.
Findings: Findings indicate that ammonia, nitrate, ammonium, total nitrogen, mineral nitrogen, EC, pH, moisture, density, and the ration of carbon to nitrogen in the initial compost are respectively as follows: 1800, 58.35, 28.2314, 14000, 2400, 11600, 145.7, 245.7, 85.6, 286, and 54.12. Finally in the 9th week, they changed as follows: 145.873, 325.81, 61.1122, 63.15065, 63.1215, 13850, 71.5, 35.7, 005.5, 5.279 and 04.22. The amount of ammonia, ammonium phosphor, mineral nitrogen, EC, moisture and density was reduced with a significant difference whereas other factors increased with a significant difference. The results of phosphor were not significantly different. Also, the results of the study revealed that ammonia, ammonium, phosphorus, total nitrogen, nitrogen, EC and COD in the zero weeks were respectively as follows: 244.26, 314.05, 298.73, 1153.6, 325.36, 6289.2, 37.088 and 3635.24, whereas in the ninth week, they changed as follows: 110.36, 141.89, 285.43, 366, 148.98, 217, 728.15, 5733.76. The amount of ammonia, nitrate, ammonium, total nitrogen, mineral nitrogen, organic nitrogen, as well as EC reduced with a significant difference, but the amount of COD increased with a significant difference. The results of phosphor and nitrate were not significantly different.
Conclusion: Ultimately it can be concluded that the quality of compost is decreased with time lapse and the more it passes after the compost production, the less the food elements in the compost consumed by vegetarians would be.
http://jehe.abzums.ac.ir/article-1-744-en.pdf
2020-04-29
165
178
10.29252/jehe.7.2.165
Compost
Leachate
Increase the age of compost
Effective parameters in compost quality
Tyeb
Moradi
1
Master of Environmental Science, Islamic Azad University, Isfahan Branch (Khorasgan), Isfahan, Iran
AUTHOR
Mohammad Hadi
Abolhasani
2
Assistant Professor, Department of Environment, Waste and wastewater Research Center, Isfahan Branch, Isfahan, Iran
AUTHOR
https://orcid.org/0000-0003-0780-7256
OTHERS_CITABLE
آلودگی فلزات سنگین در ذرات غبار خیابانی شهر تهران در سال 1397: ارزیابی غنای فلزی و درجه آلودگی
زمینه و هدف: غبار خیابانی یک واسطه زیستمحیطی با ترکیب پیچیده در مناطق شهری است. فلزات سنگین در غبار خیابانی برای مدت طولانی باقی مانده و در اتمسفر بازتعلیق میشوند. هدف از مطالعه حاضر، ارزیابی غنای فلزی و درجه آلودگی فلزات سنگین در غبار خیابانی شهر تهران بود.
مواد و روشها: نمونههای غبار از 9 نقطه از شهر تهران در سال 1397 برداشت شد. فلزات سنگین (کادمیوم، کروم، سرب، روی، آهن و آلومینیوم) در غبار خیابانی با استفاده از دستگاه ICP-MS آنالیز شد. غنای فلزات و درجه آلودگی با استفاده از شاخصهای فاکتور غنیشدگی (EF)، انباشت زمینی (Igeo)، درجه آلودگی (Cd) و درجه آلودگی اصلاحشده (mCd) تعیین شد. از آزمونهای همبستگی پیرسون (PC) و تجزیه خوشهای سلسله مراتبی (HCA) نیز برای تحلیل استفاده شد.
یافتهها: روند میانگین غلظت عناصر به صورت آلومینیوم (54/53486= )> آهن (07/46535= )> روی (14/638= )> سرب (33/200= )> کروم (94/111= )> کادمیوم (49/0= ) میلیگرم بر کیلوگرم بود. بالاترین غنیشدگی فلزی ناشی از عناصر سرب و روی بود. شاخص انباشت زمینی عناصر در ذرات غبار خیابانی نیز نشان داد که عناصر کادمیوم و سرب بالاترین مقادیر را دارا بودند. شاخصهای درجه آلودگی نیز سطوح بالای آلودگی را در غبار خیابانی نشان دادند. همبستگی معنیداری بین عناصر روی با کروم و سرب و عناصر سرب با کادمیوم مشاهده شد. همبستگی منفی معنیداری نیز بین رطوبت نسبی با غلظت عناصر سرب و روی مشاهده شد. خوشهبندی عناصر نیز نشان داد که عناصر سرب، روی، کروم و کادمیوم دارای منابع انسانی و عناصر آهن و آلومینیوم دارای منابع طبیعی انتشار هستند.
نتیجهگیری: نتایج این مطالعه نشان داد که غبار خیابانی شهر تهران دارای درجه آلودگی بالایی است. لذا این محیط واسطه میتواند آثار منفی قابل توجهی داشته باشد. بنابراین پایش مداوم غبار خیابانی ضروری است.
http://jehe.abzums.ac.ir/article-1-741-fa.pdf
2020-04-28
179
194
10.29252/jehe.7.2.179
غبار خیابانی
فلزات سنگین
غنای فلزی
درجه آلودگی
تهران
Heavy Metal Pollution in Street Dust from Tehran in 2018: Metal Richness and Degree of Contamination Assessment
Background: Street dust is an environmental medium with complex composition in urban environment. Heavy metals remain in urban dust for a long time and re-suspended in the atmosphere. This study aimed to evaluate the metal richness and degree of contamination in Tehran street dust.
Methods: Dust samples were collected from nine locations in Tehran in 2018. Heavy metals (Cd, Cr, Pb, Zn, Fe, and Al) were analyzed in street dust using ICP-MS. Metal richness and degree of contamination were determined using Enrichment Factor (EF), Geoaccumulation Index (Igeo), degree of Contamination (Cd) and modified degree of contamination (mCd). Pearson correlation (PC) and Hierarchical cluster analysis (HCA) were also used for analysis.
Results: The mean concentration trend of elements was as Al (53486.54)> Fe (46535.07)> Zn (638.14)> Pb (200.33)> Cr (111.94), Cd (0.49) mg/kg. The highest metal enrichment was due to Pb and Zn. The geoaccumulation index also showed that Cd and Pb had the highest values. Degree of contamination indices also showed high levels of contamination in street dust. Significant correlation was observed between Zn-Cr-Pb and Pb-Cd. Significant negative correlation was also observed between relative humidity-Pb-Zn. Elemental clustering also showed that Pb, Zn, Cr, and Cd had anthropogenic sources and Fe and Al had natural sources of diffusion.
Conclusion: The results of this study showed that the street dust of Tehran is highly polluted. Therefore, this environmental medium can have significant negative effects. Therefore, continuous monitoring of street dust is essential.
http://jehe.abzums.ac.ir/article-1-741-en.pdf
2020-04-28
179
194
10.29252/jehe.7.2.179
Street dust
Heavy metal
Metal richness
Degree of contamination
Tehran
Mohammad Saleh
Ali-Taleshi
1
PhD Student of Environmental Pollution, Department of Environment, Faculty of Natural Resources, University of Tehran, Karaj, Iran
AUTHOR
Mazaher
Moeinaddini
2
Assistant Professor, Department of Environment, Faculty of Natural Resources, University of Tehran, Karaj, Iran
AUTHOR
https://orcid.org/0000-0003-3097-1329
Sadat
Feiznia
3
Professor, Department of Arid Restoration, Faculty of Natural Resources, University of Tehran, Karaj, Iran
AUTHOR
Stefania
Squizzato
4
Institute of Chemical Engineering Sciences, Foundation of Research and Technology-Hellas, Greece
AUTHOR
OTHERS_CITABLE
ارزیابی عملکرد مدل راکتور دوار در حذف کدورت از محیطهای آبی با استفاده از روش انعقادالکتریکی
زمینه و هدف: حذف کدورتهای فصلی از جریانهای آب سطحی به منظور استفاده شرب، یکی از مهمترین معضلات پیشروی واحدهای تصفیهخانه میباشد. در این تحقیق کارایی روش انعقاد الکتریکی و مدل راکتور دوار ناپیوسته، به منظور حذف کدورت از جریانهای آب سطحی با در نظر گرفتن الکترودهایی از جنس آهن و آلومینیوم مورد بررسی قرار گرفته است. در نهایت با بررسی شرایط بهرهبرداری، مقادیر بهینه برای هر یک از پارامترها مورد ارزیابی قرار گرفت.
مواد و روشها: به منظور حذف کدورت جریان، از مدل راکتور دوار ناپیوسته با آرایش تک قطبی الکترودها و به صورت موازی استفاده گردیده شد. حجم نمونه در آزمایشات معادل 377 لیتر بوده است و مدل مذکور این امکان را فراهم میسازد که تمامی ذرات سیال، رسوب و همچنین آلاینده به واسطه چرخش ایجاد شده در مدل به صورت همگن با الکترودها در تماس قرار گرفته و مجموعه بواسطه عدم تاثیر عواملی همچون پرههای پمپ و لولههای بازگشت، راندمان حذف بالاتری فراهم نماید.
یافتهها: نتایج این تحقیق نشان داد که پارامترهای بهینه بهرهبرداری شامل جنس الکترود آلومینیومی، زمان بهینه 60 دقیقه، سرعت چرخش rpm 3/2 و شدت جریان A/m28/18 در 4/7= pH، فاصله الکترود 3 سانتیمتر و دمای آزمایشگاه بدست آمد. بر این اساس بالاترین میزان حذف کدورت در شرایط بهینه برای الکترودهای آهنی و آلومینیومی به ترتیب برابر با 1/84 و 3/93 درصد بدست آمد.
نتیجهگیری: نتایج این تحقیق نشان داد که مدل راکتور دوار ناپیوسته، ضمن سهولت کاربری قادر به حذف بالای کدورت جریان از محیطهای آبی بوده و کاربرد این مدل جهت استفاده در تصفیهخانههای آب شرب توصیه میگردد.
http://jehe.abzums.ac.ir/article-1-742-fa.pdf
2020-04-28
195
210
10.29252/jehe.7.2.195
انعقاد الکتریکی
کدورت
تصفیه آلاینده
مدل راکتور دوار ناپیوسته
Evaluation of Rotary Reactor Model Performance to Removal Turbidity from Aqueous Environments by Electrocoagulation Method
Background & Objectives: One of the most important problems facing the water treatment plants is seasonal turbidity removal from the drinking surface waters. In this work, the efficiency of turbidity removal from water surface has been studied using a batch rotary reactor model and electrocoagulation process and different electrodes including iron and aluminum were tested. Finally, the optimum values of the studied parameters were evaluated at different operating conditions.
Methods: In order to eliminate the turbidity from drinking water, the discontinuous rotary reactor model with monopolar electrodes was used in parallel connection. The sample volume in the experiments was 377 liters, and the rotation of the model caused all fluid particles, sediments, and contaminants to be homogeneously touched with the electrodes. This model provided a higher efficiency of turbidity removal due to not having pump blades and return pipes.
Results: Results of this study showed that the maximum efficiency of turbidity removal from drinking water would be achieved by using the material of aluminum for electrode and considering time duration of 60 min, rotation speed of the model equal to 1.3 rpm, current density of 18.8 A/m2 in pH=7.4 and electrode gap distance of 3 cm. At these conditions the maximum turbidity removal efficiency was obtained 84.1 and 93.3% for the iron and aluminum electrodes, respectively.
Conclusion: Results of this work showed that the proposed batch rotary reactor model, in addition to its easy application, is able to remove turbidity from the aqueous solutions at a the high efficiency. Therefore this model would be strongly suggested for application in drinking water treatment plants.
http://jehe.abzums.ac.ir/article-1-742-en.pdf
2020-04-28
195
210
10.29252/jehe.7.2.195
Electrocoagulation
Turbidity
Pollution treatment
Batch rotary reactor model
Saleh
Riahi
1
Ph.D. Student, Department of Water Structures Engineering, Tarbiat Modares Univesity, Tehran, Iran
AUTHOR
https://orcid.org/ 0000-0001-6849-5087
Seyed Ali
Ayyoubzadeh
2
Professor, Department of Water Structures Engineering, Tarbiat Modares Univesity, Tehran, Iran
AUTHOR
Hossein
Samadi-Boroujeni
3
Associate Professor, Dept. of Water Engineering, Shahrekord Univ., Charmahal Bakhtiari, Iran
AUTHOR
Gholamreza
Moussavi
4
Professor, Department of Environmental Health Engineering, Faculty of Medical Sciences, Tarbiat Modares University, Tehran, Iran
AUTHOR
OTHERS_CITABLE
تأثیر کیفیت آب ورودی به تصفیهخانه در ایجاد رنگ و کف در واحدهای فرایندی تصفیه آب (مطالعه موردی: تصفیهخانه آب کوه سبز)
زمینه و هدف: پارامترهای فیزیکی، شیمیایی و بیولوژیکی از مهمترین فاکتورهای تعیین کننده کیفیت آب آشامیدنی هست. هدف کلی این پروژه بررسی چگونگی تاثیرگذاری کیفیت آب ورودی به تصفیهخانه در تغییر رنگ آب و همچنین ایجاد کف در واحدهای مختلف فرایندی تصفیه آب است.
روش کار: این پژوهش به صورت مطالعه موردی و در در مقیاس واقعی برروی آب خام ورودی به تصفیهخانه آب کوه سبز انجام شده است. پژوهش در طول 6 ماه در فاصله زمانی (بهمن ماه سال 95 تا تیر ماه سال 96) انجام گرفته است. در مرحله اول کیفیت آب خام بر اساس روشهای استاندارد متد ارزیابی گردید. در مرحله بعد تاثیرهر یک از پارامترها در ایجاد رنگ و کف در واحدهای فرایندی تصفیه آب و مکانیسم تاثیرات مورد بررسی قرار گرفته است .
یافتهها: میانگین تغییرات دما، کدورت ، رنگ آب ورودی به تصفیهخانه در طی دوره پژوهش به ترتیب oC8/15 ، NTU 6 و TCU 6 بوده و محدوده تغییرات pH از 9/6 الی 4/8 است. میانگین تغییرات EC، TOCو DOC به ترتیب برابر است با؛ μS/cm765، mg/l8/5 و mg/l53/3. متوسط تغییرات UV254 و SUVAبه ترتیب برابر است با l/m 178/0و L/mg.m 856/5. همچنین متوسط تغییرات اسید هیومیک، سورفاکتانت و کلروفیل a در آب خام ورودی به ترتیب برابر است با 24/0، 05/0 میلی گرم بر لیتر و 4/2 μg/m2.
نتیجهگیری: بررسیها نشان داد که پارامترهای کیفی آب ورودی به تصفیهخانه در ایجاد رنگ و کف در واحدهای فرایندی تصفیه آب موثرند.
http://jehe.abzums.ac.ir/article-1-743-fa.pdf
2020-04-28
211
228
10.29252/jehe.7.2.211
کیفیت آب
مواد آلی طبیعی
ترکیبات هیدروفبیک
رنگ
کف
The Impact of Water Quality Entering the Refinery on the Formation of Color and Foams in Water Purification Process Units (Case Study: Koohsabz Drinking Water Treatment Plant)
Background and objectives: The Physical, chemical and biological parameters one of the most important factors determining the quality of drinking water. The overall purpose of this project is to investigate how the quality of water entering the plant in changing the water-color and creating the foams in different units of water purification.
Methods: This study is a case study and in real scale on the raw water inlet to the Koohsabz drinking water treatment plant has been done. The study was conducted over a period of 6 months (February 2016 to July 2017). In the first stage, the raw water quality was assessed according to standard methods. In the second step, the effect of each of the parameters on the color and foam formation in the water treatment process units and the mechanism of effects have been examined.
Results: Average changes in temperature, turbidity, the color of the water entering the plant during the study period were 15.8oC, 6NTU, and 6TCU respectively and pH ranges from 6.9 to 8.4. Mean change of EC, TOC and DOC respectively is; 765 μS / cm, 5.8mg /l and 3.53mg /l. The average change UV254 and SUVA were 0.178 l / m and 5.856 L/ mg, respectively. Also, the mean changes of humic acid, surfactant, and chlorophyll a in the input raw water were 0.24, 0.05 mg / l and 2.4 μg/m2, respectively.
Conclusion: Investigations showed that the water quality parameters of water entering the treatment plant are effective in creating color and foam in water treatment process units.
http://jehe.abzums.ac.ir/article-1-743-en.pdf
2020-04-28
211
228
10.29252/jehe.7.2.211
Water quality
Natural organic matter
hydrophobic parts
Color
Foams
Bahman
Masoomi
1
1. Department of Environmental Engineering, Bushehr branch, Islamic Azad University, Bushehr, Iran
AUTHOR
Tayebeh
Tabatabaie
2
1. Department of Environmental Engineering, Bushehr branch, Islamic Azad University, Bushehr, Iran
AUTHOR
https://orcid.org/0000-0002-5629-6512
Neematollah
Jaffarzadeh
3
Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran
AUTHOR
Sahand
Jorfi
4
Environmental Technologies Research Center, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran
AUTHOR
Esmaeil
Kouhgardi
5
1. Department of Environmental Engineering, Bushehr branch, Islamic Azad University, Bushehr, Iran
AUTHOR